Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable EV Charger Installation Across Dallas
EV charger installation in Dallas runs $450 to $1,900 for a typical Level 2 setup, and most homes in older neighborhoods like Oak Cliff or East Dallas also need a panel upgrade that adds $1,800 to $3,500. We’re Gus’s Solar, and we’ve been wiring chargers in Dallas homes long enough to know that the permit and utility paperwork takes longer than the actual install. Call (877) 550-6892 and we’ll walk you through the real numbers for your house, not a brochure estimate.
If you live in Dallas, you already know our grid is different. Oncor owns the wires. You pay a separate Retail Electric Provider for the electricity. That split means a charger install here has two approval tracks, and missing either one leaves you with a charger on the wall and no way to use it legally. We handle both. Gus Petrakis puts his name on every job, and a live person answers the phone 24/7, not a call center.
Why Gus’s Solar Is Dallas’s Preferred EV Charger Installation Company
We’re the locally owned, owner-operated shop that national installers can’t be. When you call about EV Charger Installation, you talk to someone who knows what a 1920s craftsman panel in Oak Cliff looks like inside. Gus founded this company in 2011, and his own crew does the work. No subs. No door-knockers. Just background-checked, uniformed techs who show up when they say they will.
Dallas homeowners from Highland Park to Richardson call us because we answer the phone. At 2 a.m. or 2 p.m., a live person picks up. That matters when you flip your breaker and your charger won’t pull power. We also honor a 90-Day Done Right Promise in writing on every job. If something isn’t right, Gus comes back. That’s it.
Our EV Charger Installation Services in Dallas
Level 2 Charger Installation
A Level 2 charger adds roughly 25 to 30 miles of range per hour, and in Dallas most garages can accommodate one with the right wiring. The catch in our older housing stock is panel capacity. Homes along the 75206 and 75208 corridors frequently have original 100-amp service that can’t sustain a charger’s continuous 40 to 48-amp draw. We handle the charger and the panel work, so you get one crew and one price.
Tesla Wall Connector Installation
We install Tesla Wall Connectors across Dallas, and here’s something few owners realize: the Tesla Wall Connector can charge other EVs with a simple adapter. So if you own a Tesla today and your spouse drives a Ford or Hyundai tomorrow, the same wall unit works. We’ve installed these in detached garages in East Dallas, on brick ranch homes in Lakewood, and everywhere in between.
Panel Upgrade for EV Charging
In Dallas, the panel is usually the real project. Homes built before 1960 in Munger Place or Oak Cliff often carry original 100-amp panels with cloth-wrapped wiring. Adding a Level 2 charger to that setup risks breaker trips at best and overheated conductors at worst. We upgrade to 200-amp service, coordinate the Oncor disconnect and reconnect, and make sure the charger never overloads the panel. In Oak Cliff, we recently upgraded a 1920s craftsman bungalow’s original 100-amp panel to 200 amps before installing a Tesla Wall Connector in a detached garage. The homeowner’s solar interconnection had been approved months earlier, but their REP’s EV charging rate required a second meter collar. We coordinated both approvals so the charger drew clean solar during the day without tripping the legacy panel.
Garage & Driveway Charger Wiring
Dallas garages vary wildly. Detached garages in the 75217 and 75218 ZIPs often need a trench for conduit. Attached garages in University Park may need only a short run from the panel. Some driveways need a pedestal-mounted charger. We quote the actual wire path, not a flat rate, and our price is the price you pay. No surprise add-ons at the door.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Dallas
We work with the chargers Dallas homeowners actually use: Tesla, Enphase, SolarEdge, ChargePoint, and FranklinWH. We stock common parts locally, which means less waiting when a breaker needs swapping mid-install. If you’re pairing solar with your charger, we install Qcells and REC panels regularly, and we service SunPower systems too. Our team knows these brands not from a spec sheet but from wiring them into Dallas panels every week.
Common EV Charger Installation Problems We See in Dallas Homes
- Legacy 100-amp panels can’t hold the load. Homes built from the 1920s through the 1950s in Oak Cliff and East Dallas often have original service panels rated for far less than a Level 2 charger needs. Without an upgrade, the breaker trips or the wires heat up. This is the single most common issue we find before any install.
- Historic overlay restrictions block street-facing hardware. Swiss Avenue and Munger Place have design-review rules. A charger or conduit mounted on a street-facing wall can trigger a stop-work order if the placement wasn’t approved first. We check the overlay maps before we drill anything.
- Oncor and the REP don’t talk to each other. Dallas is in the ERCOT deregulated zone, so the wires utility and the billing company are separate entities. An Oncor service upgrade doesn’t automatically communicate with your REP’s EV rate plan. We handle both approval tracks so your charger actually works when it’s done.
- Hail takes out outdoor chargers. Dallas sits in Hail Alley. Outdoor chargers or conduit runs exposed to big hail can get damaged. We install hail-rated enclosures and route conduit where it won’t catch a direct strike.
Pricing for EV Charger Installation in Dallas, TX
Here’s what you can actually expect to pay in Dallas. A straightforward Level 2 charger install with an adjacent panel runs $450 to $900. A Tesla Wall Connector install with a new dedicated circuit runs $700 to $1,400. A panel upgrade from 100 to 200 amps runs $1,800 to $3,500, depending on the existing wiring and Oncor’s service drop. Solar-paired EV charging adds $1,200 to $2,800 for the integration work, depending on whether you already have an Enphase or SolarEdge system in place.
Dallas’s two-contract ERCOT setup means the utility side of the job sometimes adds $150 to $400 in permit and interconnection fees that single-utility cities don’t see. We build that into your quote up front. Bring us a copy of your bill and we’ll bring you the math. Estimates are free. Call (877) 550-6892.
We Also Serve Cities Near Dallas
Gus’s Solar serves Dallas and the surrounding communities daily. We’re in Highland Park, University Park, Richardson, and Irving regularly. If you’re in one of those cities and need a charger wired or a panel upgraded, the same crew that works in Dallas will come out. Same pricing. Same 90-Day Done Right Promise.
Serving Dallas, TX - Our Local Coverage Area
We’re based in the Dallas area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - EV Charger Installation in Dallas
Yes, in most cases. A 1920s home in Oak Cliff typically has a 100-amp panel, and a Level 2 charger draws 40 to 48 amps continuously. That leaves almost no headroom for the rest of the house. Upgrading to 200-amp service is the safe route, and it runs $1,800 to $3,500. Call (877) 550-6892 and we’ll check your panel rating over the phone before we ever send a crew.
Yes. Swiss Avenue and Munger Place are both within historic overlay districts, and that means street-facing panel or conduit placement needs design-review approval before you install. Installing first and asking later risks a stop-work order. We handle the design-review paperwork as part of the job, and we know which placements the commission typically approves.
Dallas operates under ERCOT with Oncor as the wires utility and a separate Retail Electric Provider for billing. That means two approval tracks for any solar-paired charger: Oncor’s interconnection agreement and your REP’s EV-specific rate or buyback tariff. If they don’t match, your charger may draw from the grid at full price even when your panels are producing. We coordinate both contracts so the charger pulls clean solar first.
Yes. The Tesla Wall Connector uses the standard J1772 adapter to charge any EV, not just Teslas. We install these in Dallas garages where a household has mixed brands. It’s a future-proof choice if you think you might switch makes later.
Yes. Dallas sits in Hail Alley, and outdoor chargers take direct hits during spring storm season. We recommend hail-rated enclosures for any outdoor unit and route conduit along protected walls or under eaves where possible. It’s a genuine local consideration that doesn’t apply to most of the country. Call (877) 550-6892 and we’ll walk your property and point out exactly where hail could cause trouble.
Contact Gus’s Solar for EV Charger Installation in Dallas
If you’re in Dallas and ready to stop guessing about your charger install, call us at (877) 550-6892. A live person answers. We’ll ask about your panel, your home’s age, your neighborhood, and your EV. Then we’ll give you a real price. Take two weeks to think about it. The price will be the same. If a salesman needs an answer tonight, the answer should be no. We don’t work that way, and we never will.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Dallas since 2011.