Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable EV Charger Installation Across Irving
EV charger installation in Irving typically runs $650-$2,400 for a standard Level 2 unit, but homes in East Irving’s older 75060-75062 ZIP codes often need a panel upgrade first, which tacks on another $1,500-$3,000. We get calls from Irving homeowners every week who bought an EV and then discovered their 100-amp service can’t handle a 48-amp charger without tripping breakers. Gus’s Solar has wired chargers across every Irving neighborhood, from the 1950s ranch homes off Story Road to the stucco HOAs of Las Colinas, and we’ll give you a straight number before any work starts. Call (877) 550-6892 and bring us your panel details. We’ll bring you the math.
Why Gus’s Solar Is Irving’s Preferred EV Charger Installation Company
Gus Petrakis put his name on this business in 2011, and he still answers his own phone. That matters in Irving, where a lot of homeowners have been burned by out-of-state outfits that quote one number over the phone and a different one at the door. Our EV Charger Installation team knows what an Irving HOA architectural committee is going to ask before they ask it, because we’ve sat through those hearings in Las Colinas more times than we can count.
Irving customers get a live person 24/7, not a voicemail queue. When you call at 9 p.m. because your charger stopped working and you need to get to DFW Airport at 6 a.m., somebody picks up. Our background-checked, uniformed technicians are Gus’s own crew. He doesn’t hand your job to a sub. And every install carries the 90-Day Done Right Promise. If something’s not right, one call brings Gus back.
Our EV Charger Installation Services in Irving
Level 2 Charger Installation
Level 2 chargers deliver 20-40 miles of range per hour, which is what most Irving drivers actually need for overnight charging. A typical Level 2 install in Irving runs $650-$1,400, depending on the distance from your panel to the garage or driveway and whether we’re running conduit through finished walls or an unfinished garage. Homes in the 75063 ZIP, many built after 2000, often have 200-amp service and a short panel-to-garage run, which keeps the price at the lower end.
Tesla Wall Connector Installation
We install Tesla Wall Connectors throughout Irving, and the Las Colinas communities in 75038-75039 are a big part of that work. Tesla owners in those HOA-governed neighborhoods need to know that the architectural committee often treats a wall connector like any other exterior alteration, which means paperwork. We handle the renderings, the submittals, and the hearing appearance so you don’t have to. A hardwired Tesla Wall Connector install in Irving typically runs $800-$1,600 before any panel work.
Panel Upgrade for EV Charging
This is the one that surprises people. A large portion of East Irving homes built in the 1950s through 1970s still carry 100-amp panels. A Level 2 charger pulling 48 amps will trip that main breaker the first time your AC kicks on in August. We replace those with 200-amp service, which in Irving runs $1,500-$3,000 depending on whether the meter base needs replacing and how the existing wiring enters the house. It’s not a fun line item, but it’s the difference between charging every night and resetting your main breaker every afternoon when the heat hits 102°F.
Garage & Driveway Charger Wiring
Most Irving garages weren’t built with EV charging in mind. We run dedicated 40, 50, or 60-amp circuits from your panel to the exact spot your charger will live, whether that’s inside the garage or mounted on the exterior for driveway charging. In Irving’s hail-prone climate, any outdoor receptacle or conduit run needs weather-rated components and proper sealing. We use outdoor-rated enclosures and route conduit so summer heat doesn’t bake the connections. A typical dedicated circuit run in Irving costs $500-$1,100, shorter for attached garages, longer for detached ones like you see in the older 75060 neighborhoods.
Solar-Paired EV Charging
If you’ve got solar panels or you’re thinking about them, pairing that system with your EV charger changes the math on what it costs to drive. Charging during daylight hours when your panels are producing means you’re buying less from Oncor, and in Irving’s peak summer afternoons, that’s real money. We design the charger circuit and the solar system together so your panel doesn’t end up undersized for both. Gus quotes the year-25 output, not the day-one brochure number, and that’s the same standard we apply to your charging setup.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Irving
We work with Tesla, Enphase, SolarEdge, and FranklinWH, and we stock common parts locally so Irving customers aren’t waiting on a truck from out of state. If you’ve got a Panasonic or Qcells solar array and you want to add a charger that talks to it, we handle that wiring cleanly. The brand of your charger matters less than the quality of the circuit feeding it. That’s where the work actually happens.
Common EV Charger Installation Problems We See in Irving Homes
- Builder-grade 14-50 receptacles that aren’t up to the job. Newer Irving homes, especially in Las Colinas and parts of 75063, often came with a cheap 14-50 outlet in the garage. Those are fine for a dryer, but a continuous 32-amp EV load will cook the contacts over time. We replace them with industrial-grade receptacles or hardwire the charger directly.
- 100-amp panels in East Irving. The ranch-style homes in 75060-75062 are solid houses, but they were built for 1970s electrical loads. Adding a 48-amp charger without upgrading service means nuisance tripping and, in the worst case, overheating at the panel. We won’t install a charger on an undersized panel without telling you what it needs.
- HOA stop-work orders in Las Colinas. The architectural covenants in 75038-75039 are strict. Route conduit across a front-facing garage wall without approval and you’ll get a stop-work order and a mandatory rework. We submit the plans first, every time.
- Hail-damaged outdoor charging components. Irving sits in North Texas’s large-hail corridor. Golf-ball-size hail breaks plastic enclosures and stresses exposed wiring. We spec enclosures that survive it and we check the seals after storm season.
Pricing for EV Charger Installation in Irving, TX
Here’s what Irving homeowners should expect to pay. A straightforward Level 2 charger install on an existing 200-amp panel runs $650-$1,400. A Tesla Wall Connector hardwired install runs $800-$1,600. A dedicated circuit for a detached garage or driveway run runs $500-$1,100. If you need a panel upgrade from 100 to 200 amps, that’s $1,500-$3,000 on top. HOA submittals and hearings in Las Colinas can add $200-$500 in documentation time depending on what the committee requires. The price we quote is the price you pay, period. Call (877) 550-6892 for a free estimate built off your actual panel and your actual house, not a generic brochure figure. If a salesman needs an answer tonight, the answer is no. Take two weeks. Think about it. The price will be the same.
We Also Serve Cities Near Irving
Gus’s Solar serves the whole metro from our Dallas-Fort Worth office, and our crews are in Irving every week. If you’re in Farmers Branch, University Park, Highland Park, or Dallas, we’ll come out the same way we’d come to you in Irving. Same crew, same pricing, same 90-Day Done Right Promise. Call (877) 550-6892 and we’ll get you scheduled.
Irving’s Las Colinas HOAs Add Weeks to EV Charger Jobs
Here’s something a generic national page won’t tell you. If you live in the Las Colinas master-planned communities in 75038-75039, your HOA architectural committee probably has to approve your charger installation before anyone touches a wire. That’s not a rumor. We’ve sat through enough hearings to know the rhythm. Many covenants require detailed equipment submittals, photorealistic renderings showing conduit routing and exterior placement, and sometimes an in-person appearance. The pre-permit phase routinely stretches 30-60 days, sometimes longer if the committee only meets monthly.
Out-of-market installers consistently underestimate this. They quote a one-day install, then the HOA sends a stop-work order because nobody filed the submittal. We price the HOA process into the contract and we handle it start to finish. Our crew recently wired a Tesla Wall Connector in a 75038 Las Colinas stucco home where the HOA required the panel upgrade and conduit routing to match the exterior paint color and follow a rear-elevation path. We upgraded the homeowner’s 200-amp service from the original 150-amp, installed a 60-amp dedicated circuit with a rapid shutdown-compliant disconnect, and coordinated the HOA’s final inspection before the owner’s first overnight charge. That’s the kind of detail work that keeps you from fighting your HOA for six months after the fact.
East Irving’s Legacy Panels Are the Hidden Cost
The ranch-style tract homes that dominate 75060, 75061, and 75062 were built in a different electrical era. Most still carry 100-amp service, which was plenty for a 1971 kitchen and a window AC unit. It is not plenty for a modern EV charger running alongside central air, an electric dryer, and a microwave. When we install a Level 2 charger in these homes, we almost always recommend a 200-amp service upgrade first. That adds $1,500-$3,000 to the job, and it’s not optional if you want to charge overnight without tripping your main. We’d rather tell you that before we start than after your breaker trips on the first 105°F afternoon.
Serving Irving, TX - Our Local Coverage Area
We’re based in the Irving area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - EV Charger Installation in Irving
Most likely yes. The Las Colinas HOA architectural covenants in 75038-75039 treat EV charger installation as an exterior alteration when any conduit, disconnect, or mounting hardware is visible from outside the garage. You’ll need to submit equipment plans and possibly attend a hearing. We handle the submittals and the hearings for you. Call (877) 550-6892 and we’ll start with a look at your HOA’s specific covenants to see what applies.
Almost certainly. Homes in 75060-75062 from the 1950s through 1970s typically have 100-amp service, and a Tesla Wall Connector at 48 amps will pull close to half that by itself. We recommend a 200-amp upgrade before we install the charger. In Irving that runs $1,500-$3,000, and it protects your home’s wiring from overheating. Estimates are free.
Yes, and in Irving it’s one of the smartest reasons to go solar. Charging during daylight hours when your panels are producing means you’re drawing less from Oncor’s grid, and in the peak afternoon hours when Irving temperatures hit triple digits, those delivery charges are at their highest. We design the solar array and the charger circuit together so the system is sized for both. Gus quotes year-25 output, not the day-one number.
Irving sits in the North Texas large-hail corridor and gets hit with golf-ball-to-baseball-size hail multiple times a year. Any exterior enclosure, conduit run, or disconnect needs to be hail-rated and properly sealed so ice and water don’t get into the connections. We spec outdoor-rated enclosures built for that exposure and check the seals after storm season. If hail damages your charger or its wiring, call (877) 550-6892 and we’ll come out.
Yes, and we do this constantly in Irving’s newer 75063 and Las Colinas homes. Builder-grade 14-50 receptacles aren’t rated for continuous 32-amp EV loads and the contacts will degrade over time, which trips breakers and creates heat at the outlet. We pull the cheap receptacle and hardwire your charger directly to a dedicated circuit. It’s safer and it eliminates the most common failure point. The cost in Irving typically runs $650-$1,200 depending on how the original circuit was run.
Call Gus’s Solar for EV Charger Installation in Irving
If you’re in Irving and you’re ready to stop charging off a 120-volt trickle, call (877) 550-6892. We’ll talk through your panel, your garage layout, and your HOA situation if you’ve got one. The estimate is free. The price won’t change after you hang up. And if a salesman somewhere else needs an answer tonight, the answer is no. Take your time. Gus will still be here tomorrow.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Irving and the Dallas-Fort Worth metro since 2011.