Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Fast, Reliable EV Charger Installation Across University Park
EV charger installation in University Park typically runs $1,500 to $4,900 depending on your panel capacity, the charger type, and how far wiring needs to run from the main electrical service. Most University Park homes we do are large custom builds or older brick traditionals, and both present very different permitting and panel challenges. We respond to University Park calls within about an hour during business hours, and we know the city’s separate permitting process inside and out. If you’re pricing out a charger and want a straight number based on your actual panel, call (877) 550-6892 and we’ll talk you through it.
Why Gus’s Solar Is University Park’s Preferred EV Charger Installation Company
University Park issues its own electrical permits through its own city hall, not Dallas. That’s a critical distinction most out-of-area contractors miss. When a permit gets filed with Dallas instead of University Park, the job stops. We coordinate with University Park’s inspection office on every installation we do, and our EV Charger Installation team schedules inspections during the same visit when possible. That saves a second or third trip.
Gus Petrakis put his name on this company in 2011, and his number isn’t a call center. When you call (877) 550-6892, a real person answers, day or night. That matters when a breaker keeps tripping at 10 p.m. and you need to know whether it’s safe to keep the charger on. We’re the local shop that comes back if something isn’t right. That’s why University Park homeowners keep our number saved.
Response time to University Park is fast because our crews are based right in the Dallas-Fort Worth metro. We schedule most University Park jobs within 2 to 4 business days. Emergency panel issues get same-day or next-day attention. Every technician who shows up at your door is background-checked, uniformed, and works directly for Gus. Not a sub. Not a third-party crew.
We’ve worked in University Park long enough to know the difference between a 1950s brick traditional on a 100-amp panel and a 4,500-square-foot custom build with dual AC compressors and a pool. Each needs a different charger setup. We quote accordingly.
Our EV Charger Installation Services in University Park
Level 2 Charger Installation
Most University Park homeowners choose a Level 2 charger because it adds 25 to 40 miles of range per hour instead of the 3 to 5 miles you get from a standard wall outlet. A typical Level 2 installation in University Park runs $1,500 to $2,900 when your panel has spare capacity and the garage is within 40 feet of the main breaker. Homes with panels on the far side of the house from the garage cost more because of the wire run. We quote the number off your actual panel and layout, not a generic worksheet.

Tesla Wall Connector Installation
Tesla Wall Connectors are the most common charger we put in University Park garages. We installed one on Golf Drive in a 2000s custom home after the homeowner’s original contractor wired it to a 100-amp subpanel that also fed two AC compressors and pool equipment. The breaker tripped every time the car charged. Our crew ran a new 60-amp dedicated circuit from the main panel, added a load-shedding device, and coordinated the final with University Park’s inspector. The homeowner hasn’t tripped a breaker since.

Panel Upgrade for EV Charging
Many of the older 1950s through 1970s brick traditionals in University Park still run on 100-amp panels. A 48-amp charger alone draws nearly half that. Add central air, an electric dryer, and a pool pump, and you’re flirting with the panel’s limit. We see homeowners try to skip the panel upgrade to save money, and the result is tripped breakers and a charger that only works when the house isn’t doing anything else. A panel upgrade in University Park typically runs $2,800 to $5,500. Yes, it’s more money. It’s also the difference between a charger that works every night and one that works when the AC isn’t running. Gus’s Solar gives you the honest math before you spend a dollar.

Garage & Driveway Charger Wiring
Driveway and exterior installations in University Park carry different requirements than interior garage work. University Park’s wind-load standards apply to the conduit and mounting hardware, and high-end slate or synthetic shake roofs don’t forgive sloppy flashing. We run exterior conduit tight to the structure, use weather-rated enclosures, and match flashing details to the material on your home. If your charger needs to sit at the curb line or on a pedestal near the driveway, we handle the trenching and the University Park inspection sign-off. Exterior runs within the DFW area typically add $400 to $1,200 to the base install depending on distance and conduit path.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in University Park
We work with the equipment homeowners in University Park actually ask about: Tesla Wall Connectors, Enphase EV chargers, and FranklinWH backup-ready systems that pair with solar. We also service and hardwire ChargePoint, Wallbox, and SolarEdge chargers. Because we’re local, we can often pick up parts the same day from our metro suppliers instead of waiting on a warehouse drop-ship. That keeps your University Park job moving when a breaker or a relay fails at the worst possible time. If you already bought a charger from an automaker or a big-box store, we’ll install it and make sure the wiring meets University Park’s inspection standards.
Common EV Charger Installation Problems We See in University Park Homes
- Permit filed with Dallas instead of University Park. This stops work cold. University Park has its own permitting office at city hall, and the inspector checks for University Park’s specific electrical requirements. Contractors who work mostly in Dallas file with Dallas and the job stalls for weeks. We file with University Park directly, every time.
- 100-amp panels on older brick traditionals. Homes from the 1950s through 1970s on streets near University Boulevard and along the Fairway often can’t support a 48-amp charger without a panel upgrade. We do a load calculation before quoting so you know if the upgrade is required or just recommended. Skipping it means a charger that trips whenever the whole house is running.
- Charger location picked for cosmetics, not wiring access. On high-end slate and synthetic shake roofs, the exterior wall penetration and conduit run have to meet University Park’s wind-load and flashing requirements. We see homeowners want the charger on a far corner of the driveway, then discover the wire run plus the penetration work doubles the cost. We’ll tell you before we start, not after.
- Undersized subpanels on newer custom homes. Large 2000s-era builds commonly have a subpanel in the garage that’s already loaded with pool pumps, outdoor kitchens, and motorized gates. Connecting a 48-amp charger to that subpanel without checking the load calculation is a recipe for nuisance tripping. We size the circuit off the actual loads, not the label on the box.
Pricing for EV Charger Installation in University Park, TX
Here are honest ranges for University Park. A standard Level 2 installation with a nearby panel and open breaker slots runs $1,500 to $2,900. A Tesla Wall Connector install on a dedicated 60-amp circuit typically lands between $1,800 and $3,200 including the unit. Panel upgrades add $2,800 to $5,500 when they’re required. Exterior and driveway runs add $400 to $1,200 depending on the trench length and conduit path.
What moves the price: how far the panel sits from the garage, whether you need a panel upgrade, whether the charger goes outside, and whether your home is an older brick traditional or a newer custom build with a loaded subpanel. We quote the number off your actual electrical setup, not a teaser rate. And the number you see is the number you pay. Estimates are free, and we’ll bring you the math. Call (877) 550-6892 for an exact quote on your University Park home.
We Also Serve Cities Near University Park
Our crews regularly run installations in University Park and the surrounding communities: Highland Park, Richardson, Dallas, and Addison. If your charger project sits in one of those areas, the same University Park permitting standards guide our work. We know which city hall to file with and what each inspector expects.
Serving University Park, TX - Our Local Coverage Area
We’re based in the University Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - EV Charger Installation in University Park
University Park issues its own electrical permits through its own city hall, entirely separate from Dallas. If your contractor files with Dallas, the job gets flagged and stopped. We file directly with University Park’s permitting office and schedule the inspection with University Park’s inspector. It adds a step, but it’s the correct step, and we handle the whole thing. Call (877) 550-6892 with your address and we’ll confirm which process applies to your property.
Generally no. A 48-amp charger draws about 55 amps at peak, which is over half the capacity of a 100-amp panel. Older 1950s through 1970s brick traditionals in University Park that still have 100-amp service usually can’t support that load alongside central air, an electric dryer, and other appliances. You’ll need a panel upgrade, which we quote at $2,800 to $5,500. Some homes can get by with a 32-amp charger, but we won’t know until we see your panel. Call us and we’ll give you a straight answer.
Yes, especially in University Park. Homes that size run dual HVAC systems, and monthly bills over $600 to $800 are common from June through September. If you already have solar, pairing your EV charger with your system means your car runs on stored sunlight during the day and grid power at night at your utility’s off-peak rate. We configure the charger to charge when your panels are producing, which directly cuts your bill. If you don’t have solar yet, we’ll quote the charger and the array together so the math works off your actual bill. That’s what Gus means by “bring me a bill, I’ll bring you the math.”
No. Many of the newer custom builds in University Park were designed with standing-seam metal roof sections over garage wings or rear additions. If your charger mounts on or near that section, our crew uses clamp-based, no-penetration mounting hardware that satisfies both University Park’s inspector and your roof warranty. No holes, no flashing, no leak risk. Homes with slate or synthetic shake sections need a different approach, but those are exterior wall penetrations, not roof penetrations. We’ll tell you exactly what your installation requires before we start.
University Park’s permitting office expects exterior EV charger mounts and conduit to meet North Texas wind-load standards. We use weather-rated enclosures and schedule 40 or schedule 80 conduit, and we anchor mounts to structural members, not just siding or trim. The goal is a charger that stays put through hail season and the spring storm line. Every installation we do in University Park passes the city’s wind-load review. If a previous contractor did exterior work and you’re not sure it was done right, call us and we’ll come look. No trip charge inside our own county.
Call Gus’s Solar for Honest EV Charger Installation in University Park
If you’re in University Park and you want a charger that’s sized to your panel, wired to pass inspection, and installed by a crew that answers the phone afterward, call us. We’ll quote your job off the actual electrical setup in your home, not a national average. We’ll file the right permit with the right city. And we’ll tell you what’s optional and what isn’t. Call (877) 550-6892 for a free estimate. Bring us a bill, we’ll bring you the math. No pressure, no same-day signature demands, just a number you can trust.
Written by Gus Petrakis, Owner at Gus’s Solar, serving University Park, TX.






Before
After
Before
After
Before
After