Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable EV Charger Installation Across Cleburne
If you’re looking to get an EV charger installed in Cleburne, you’re likely wondering about cost and timing. A Level 2 charger installation in Cleburne typically runs between $850 and $2,200 depending on panel capacity, distance from the breaker box, and whether a service upgrade is required. Most jobs are done in one day, but some acreage properties in the 76033 zip code with detached workshops need a second trip for inspection coordination with Cleburne Power & Light.
We know Cleburne differs from Fort Worth. Your utility is Cleburne Power & Light, your inspection happens through city offices, and your property might sit on a five-acre lot with a workshop we need to reach from a gravel drive. We plan for that before we send Gus’s crew out. Questions? Call us at (877) 550-6892. A live person answers.
Why Gus’s Solar Is Cleburne’s Preferred EV Charger Installation Company
Cleburne homeowners keep calling us for the same reason: Gus Petrakis puts his name on the truck and answers his own phone. No call center. No third-party crew showing up unannounced. When we say background-checked, uniformed technicians, we mean our own people, not a sub. That matters when someone is in your garage wiring a 240-volt circuit.
We’ve been doing this since 2011, and in that time we’ve learned the quirks of Johnson County work. Cleburne’s older neighborhoods near downtown and along Henderson Street and Kilpatrick Street are full of 1940s to 1970s wood-frame homes. Those panels are not like the 2000s brick ranches out near US-67. We know the difference, and we quote accordingly. Our customers in Cleburne come back to us for solar, batteries, and Cleburne Commercial Solar Installation because the first job went as promised. Bring me a bill, I’ll bring you the math. We quote off your actual electrical setup, not a generic price sheet.
Our EV Charger Installation Services in Cleburne
Level 2 Charger Installation
Level 2 chargers need a dedicated 240-volt circuit, usually on a 40 to 60-amp breaker. In Cleburne’s older homes, the panel might already be near capacity from a well pump, two AC units, and a dryer. We check the service drop size before we quote. If you have a 100-amp panel, we’ll tell you up front what a EV Charger Installation will actually cost, including the panel work.
Tesla Wall Connector Installation
We install Tesla Wall Connectors regularly across Cleburne, including in detached workshops and garages a hundred feet from the main structure. On a recent job off Kilpatrick Street, we ran a 100-amp subpanel to a 30×40 workshop and set the Tesla charger on a 60-amp breaker. The main panel was already maxed out, so we coordinated with Cleburne Power & Light to upgrade the meter base to a 320-amp continuous-rated socket before the final inspection. One trip. Done right.
Panel Upgrade for EV Charging
Older Cleburne homes near downtown frequently have 100-amp split-bus panels from the mid-century. Those cannot safely handle a 48-amp charger plus a dryer and an air conditioner at the same time. We install 200-amp panels, and when the home has a solar-paired charger or a heavy workshop load, we sometimes go to 320-amp continuous-rated service. Cleburne Power & Light has its own meter socket requirements, and we handle that paperwork for you.
Garage & Driveway Charger Wiring
For detached garages and workshops on acreage properties in the 76033 zip code, the wiring is the hard part. Long runs from the house to the shop need schedule-80 PVC under any driveway, not direct-burial cable. The city inspects depth and conduit type, and we have failed inspections on behalf of customers who tried it themselves. We do not shortcut this. Our crew digs the trench, runs the conduit to code, and leaves the property clean.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cleburne
We work with the equipment you already own or want installed. Tesla, Enphase, FranklinWH, Panasonic, and Canadian Solar are among the brands we install and support. Every brand we quote is installed by Gus’s own crew, not a rotating bench of temps. Cleburne customers in the 76031 and 76033 zip codes get fast turnaround on parts because we count on local supply houses and keep common components on our trucks. Call us at (877) 550-6892 if you need advice on which charger matches your panel and driving habits.
Pricing for EV Charger Installation in Cleburne, TX
Here is what you can expect to pay in Cleburne, based on real jobs we have completed in this market:
- Level 2 charger install near panel (charger on the wall within 20 feet of the breaker box): $850 to $1,400
- Tesla Wall Connector install with 60-amp circuit from a 200-amp panel: $1,100 to $1,700
- Panel upgrade from 100-amp to 200-amp (required for many older Cleburne homes): $2,800 to $4,500
- Detached workshop or garage charger wiring (trenching, conduit, subpanel, 50 to 100-amp service): $2,500 to $5,500
- Solar-paired EV charger with battery integration: $1,900 to $6,000 depending on inverter and battery setup
You will not get a phone quote that doubles when we arrive. The number we quote is the number you pay. We offer free estimates anywhere in Cleburne, and our no-trip-charge policy applies inside Johnson County. Take two weeks. Think about it. The price will be the same. Call (877) 550-6892 for an exact quote on your panel and property.
How Cleburne Power & Light Changes the Install
This is the part most installers from Fort Worth get wrong. Cleburne is served by Cleburne Power & Light, the city’s own municipal electric utility, not Oncor. If you put a Level 2 charger on an acreage property in Cleburne, CPL often requires a separate service upgrade inspection and a different meter-socket configuration than the standard Oncor workflow used in Burleson or Joshua. An installer who shows up expecting Oncor paperwork will stall at the CPL desk, and your project stretches from one day to three weeks. We do this differently. We know CPL’s application forms, we schedule inspections through city offices before we quote, and we account for the municipal timeline in our start date. That is the difference between an EV Charger Installation in Cleburne that finishes on time and one that limps along because someone assumed the wrong utility.
Common EV Charger Installation Problems We See in Cleburne Homes
- 100-amp split-bus panels on 1940s to 1970s homes. Many houses near downtown Cleburne and along Henderson Street still run on the original panel. Adding a 48-amp charger to a panel that already serves a dryer and two HVAC units trips the main breaker. We upgrade the panel before the charger goes in.
- Detached workshops with long service drives. On acreage lots in 76033, the charger is often 150 feet from the house. Direct-burial cable under a gravel drive fails inspection for depth. We run schedule-80 PVC conduit at proper depth and pull the conductors once, not twice.
- Meter base not rated for solar-paired charging. Cleburne Power & Light requires a 320-amp continuous-rated meter socket for many solar-paired EV charger installs. We verify this before we pull the service entrance conductors, so you do not get a re-pull charge or a failed inspection.
- Hail damage to solar panels affects charging logic. Johnson County hail storms can microcrack panels. If your solar-paired charger is underperforming, we check the array for hail damage while we are there, so you do not get a charger that works but a solar system that does not.
We Also Serve Cities Near Cleburne
Our Cleburne customers often refer us to family in Keene, Joshua, Burleson, and Crowley. We cover all of Johnson County and the southern DFW exurbs. The CPL municipal process differs from Oncor territory, so if your property sits inside the Cleburne city limits, we plan for the city’s own inspection and meter requirements.
Serving Cleburne, TX - Our Local Coverage Area
We’re based in the Cleburne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - EV Charger Installation in Cleburne
Yes. Cleburne Power & Light requires its own interconnection or service upgrade approval when the charger changes your meter class or adds load that touches the service entrance. This is separate from the city’s electrical permit and happens through CPL’s municipal process, not Oncor’s. We handle both tracks before we schedule the crew. Call (877) 550-6892 and we’ll sort the paperwork.
Yes, and it is one of the most common installs we do in Cleburne. You need a subpanel in the shop, schedule-80 PVC conduit for any run under a driveway or gravel path, and enough capacity at the main panel. On older acreage homes with well pumps and multiple AC units, a 200-amp main panel upgrade is often required first. We quote the full path, including trenching, so there are no surprise line items.
Most homes built between the 1940s and 1970s in central Cleburne have 100-amp service with split-bus panels. Those panels cannot safely support a 48-amp charger alongside the existing loads. We typically upgrade to a 200-amp panel. If the property also has a detached workshop or you plan to add our Solar Panel Installation in Cleburne later, a 320-amp continuous-rated service may be the better long-term move.
Because Cleburne Power & Light runs its own net-metering and buyback structure inside ERCOT, and it differs from Oncor’s, your Solar Panel Repair in Cleburne and interconnection needs are unique. The meter base and interconnection agreement have to match what CPL actually requires, or the solar array will be approved but the charger circuit will not pass inspection. We quote the year-25 output, not the day-one brochure number, and that includes how your charger draws from the array versus the grid.
Yes, if the charger is on a circuit fed by a solar-paired system, the installation has to meet the same rapid shutdown and labeling requirements as the solar equipment itself. CPL inspectors check this during the meter and service inspection. We take care of the compliance wiring and marking as part of the charger install, so you are not stuck fixing a failed inspection later.
If you have more questions about your specific Cleburne property, call us at (877) 550-6892. We answer the phone, and if you want Gus to come out and look at the panel before you commit to anything, that visit is free inside Johnson County.
Cleburne is home to self-reliant people who want a job done right the first time. That is exactly how we work. One call, one crew, one clear price. Call (877) 550-6892 today.
Written by Gus Petrakis, Owner at Gus’s Solar.