Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable EV Charger Installation Across Burleson
EV charger installation in Burleson typically runs $650-$2,200 for a hardwired Level 2 unit, and most jobs are completed in a single visit. That’s the honest range we quote over the phone, before anyone steps foot on your property. We install across both sides of Burleson’s county line: the Oncor side and the Johnson County Electric Cooperative side. If you’re reading this at 9 p.m. because your new EV is in the driveway and you’re tired of the 120-volt trickle charge, call (877) 550-6892. A live person answers. It might be Gus.
Why Gus’s Solar Is Burleson’s Preferred EV Charger Installation Company
We’re not a pop-up shop that discovered Burleson last spring. Gus Petrakis founded this company in 2011, and his name is on the truck, the invoice, and the website. That matters when you’re putting a 60-amp circuit on your garage wall and want to know the person who pulled the permit will still answer the phone in three years. Our EV Charger Installation team works in Burleson weekly, from the neighborhoods around Brittany Lane to the acreage lots south of town off 731 and 528.
Burleson homeowners hire us for a few reasons that don’t show up in a quote. We know which utility governs which address before we quote the job. We don’t sub the work out to a crew we’ve never met. And we don’t ask for a signature the same night we meet you. Take two weeks. Think about it. The price will be the same.
Our EV Charger Installation Services in Burleson
Most Burleson homes are well-suited to a Level 2 charger, but the right setup depends on your panel, your garage type, and whether you’re in the 76028 or 76097 ZIP. Here’s what we actually do:
Level 2 Charger Installation
A Level 2 charger puts about 25-30 miles of range back in your battery per hour, compared to 3-4 miles from a standard wall outlet. Most Burleson installs use a 60-amp circuit on a 240-volt line, hardwired to a NEMA-compatible charger mounted near the garage door or on an exterior brick wall. We handle the permit, the wiring, the box, and the final inspection walkthrough.
Tesla Wall Connector Installation
Tesla’s Wall Connector is the most common unit we install in Burleson, and for good reason: it’s straightforward, weather-rated, and pairs cleanly with solar if you have it or want it later. We mount it where you actually park and size the circuit to your Tesla’s onboard charger, whether that’s a 48-amp or 32-amp draw.
Panel Upgrade for EV Charging
This is the conversation we have most often with homeowners in mid-2000s Burleson brick homes. A 200-amp panel that also feeds two air conditioners, an electric dryer, and a well pump may not have breathing room for a 48-amp charger. We don’t guess; we do a load calculation off your real usage. When a panel upgrade is needed, it typically adds $2,800-$4,500 and saves you from nuisance tripping during the summer afternoons when your AC and your charger are running at the same time.
Garage & Driveway Charger Wiring
Burleson’s older homes and its acreage properties present different wiring challenges. A detached workshop or garage on a lot east of I-35W often requires a subpanel run, trenching for buried conduit, and coordination with the utility that actually governs that parcel. We’ve done enough of these to know the Johnson County Electric Cooperative process cold, so the energization doesn’t stall for weeks.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burleson
We work with the chargers and panels Burleson homeowners actually buy: Tesla, Enphase, and FranklinWH for charging and battery coordination, plus Qcells, REC, and SunPower on the solar side when you want your EV to run on your own electrons. We keep common breakers, conduit, and charger mounting hardware on the truck, so a typical Burleson install doesn’t require a second trip for parts.
Common EV Charger Installation Problems We See in Burleson Homes
- Wrong utility assumption. A permit pulled assuming Oncor interconnection on a southern Burleson address that’s actually Johnson County Electric Cooperative territory can stall energization for weeks while JCEC paperwork is redone. We verify the utility on your specific address before we quote anything.
- Panel overload on hot afternoons. A 48-amp charger on a 200-amp panel that also feeds a detached workshop and two HVAC units trips the main breaker on 100-degree days. We size the circuit to your real load, not what the brochure says.
- Exterior charger mounted with indoor-rated cable. Brick-veneer garages are the norm in Burleson, and an exterior charger needs weatherproof conduit. Indoor NM-B cable on an exterior wall breaks down after a few hail seasons, and the fix involves pulling the whole run. We do it right the first time.
- Charger placement that doesn’t match your actual parking pattern. The charger goes where you park, not where the most convenient panel is. We see plenty of installs where someone parked in the driveway and the charger is inside the garage door track line.
Pricing for EV Charger Installation in Burleson, TX
A hardwired Level 2 charger install in Burleson runs $650-$1,200 when the panel has capacity and we’re within 25 feet of the panel. An install in a detached workshop or garage, with a subpanel and trenching, runs $1,800-$2,800. A panel upgrade, when required, lands at $2,800-$4,500 depending on panel size and utility requirements. Tesla Wall Connector installs fall in the $700-$1,300 range including the unit. We quote the full number up front, and it’s the same number when the job is done. Free estimates. Senior and veteran discounts apply, and there’s no trip charge if you’re inside our county footprint. Call (877) 550-6892 and bring us the details; we’ll bring you the math.
Why Burleson’s Split-County Utility Map Changes Your EV Charger Project
Here’s the thing most generic installers won’t tell you about Burleson: the city straddles Tarrant and Johnson counties, and that invisible line running through the 76028 and 76097 ZIP codes decides who approves your charger’s energization. On one side of Renfro Street, you’re in Oncor’s deregulated ERCOT territory, where the interconnection and buyback paperwork follows the Texas retail electric provider process. On the other side, you’re under Johnson County Electric Cooperative rules, where the meter socket, the interconnection agreement, and the inspection workflow are a different animal entirely. If you’re on a rural lot south of town near the unincorporated Johnson County fringe, your Burleson mailing address does not guarantee Oncor service. We verify the utility before the first wire is pulled, and that single step is the difference between a charger that’s live this week and one that’s waiting three weeks on paperwork.
Solar-Paired EV Charging for Burleson Homeowners
Burleson gets 230-plus sunny days a year, and summers routinely top 100 degrees. That’s a lot of sun on your roof, and it’s exactly why solar-paired EV charging makes sense here. When you pair a Level 2 charger with a rooftop array and a battery system we’ve installed, you’re charging your EV with electrons your panels produced that morning. Our crew recently completed a Tesla Wall Connector installation for a homeowner on a 1.5-acre lot off County Road 528 near Hidden Vistas, where the detached workshop sits 120 feet from the main panel. We routed 2 AWG THHN conductors through buried PVC conduit to a 60-amp subpanel on the workshop, installed the Wall Connector on the building’s south wall, and coordinated with Johnson County Electric Cooperative for a separate meter socket. That homeowner now charges his Model Y overnight using excess solar production, with no impact on the home’s main service load. That’s the kind of one-trip, heavy-duty install we do regularly in the rural and acreage sections of Burleson.
The payback math works differently here than in shadier parts of North Texas. With Burleson’s open south-facing rooflines on the newer brick homes, a solar array sized to cover both home and EV use can hit break-even faster than the national average. We quote the year-25 output, not the day-one brochure number.
We Also Serve Cities Near Burleson
Our crew runs regularly from Burleson to Crowley, Everman, Rendon, and Joshua. If you’re in one of those areas and need an EV charger installed, the same live-answer phone line applies, and the same local crew shows up. Call (877) 550-6892 and we’ll sort out whether you’re an Oncor customer or a JCEC customer before we quote the job.
Serving Burleson, TX - Our Local Coverage Area
We’re based in the Burleson area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - EV Charger Installation in Burleson
You can check your electric bill, or call us and we’ll tell you. It’s the first thing we verify, because it changes the permit, the interconnection, and the energization timeline. Addresses in the Tarrant County portions of Burleson are almost always Oncor; addresses south and west toward unincorporated Johnson County can be JCEC. Call (877) 550-6892 with your address and we’ll confirm it on the spot.
In many mid-2000s Burleson homes, the answer is no, if you have an open slot and your panel isn’t already maxed out by air conditioning, an electric dryer, and a well pump. But when we do the load calculation and the numbers don’t leave room for a 48-amp charger, a panel upgrade is the safe call. We’ll show you the actual math from your usage, not a guess.
Yes, but the net metering terms depend on which utility governs your address. Oncor customers in Burleson’s Tarrant County sections buy and sell through their retail electric provider’s buyback plan. Johnson County Electric Cooperative members have a different compensation structure. We’ll walk you through what your specific address qualifies for before you commit to anything.
For a detached garage or workshop, we use buried PVC conduit with THHN/THWN-2 conductors rated for direct burial in wet locations, sized to the charger’s amperage and the distance from your main panel. Johnson County Electric Cooperative inspects these runs, and they expect the conduit depth and wire gauge to match National Electrical Code. We’ve pulled these permits enough times to get the paperwork right the first time.
Your Level 2 charger runs on grid power, so it will charge during a hailstorm unless you lose power. In a blackout, a charger paired with a FranklinWH or Tesla battery system will keep charging your EV from stored solar energy. Burleson sits in North Texas’s hail corridor, so we always recommend an exterior-rated charger and proper weatherproofing, and we coordinate with your homeowner’s insurance on the array if solar is part of the job.
Need an EV charger installed in Burleson this week? Call (877) 550-6892 for a free estimate. A live person answers, and the number we quote is the number you pay.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Burleson and the surrounding area.