Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Solar Panel Repair Across Ennis
Solar panel repair in Ennis typically runs $180 to $2,400 depending on whether you’re replacing a single hail-cracked panel or re-terminating damaged trunk cable across a full array. Most repair calls in Ennis get a same-day or next-day visit from our crew, and you’ll talk to a live person when you call (877) 550-6892. We know this town’s hail pattern, its older ranch homes, and the 100-amp panels that still sit on many of them. That local knowledge means we diagnose the real problem faster and fix it right the first time.
Why Gus’s Solar Is Ennis’s Preferred Solar Panel Repair Company
Gus Petrakis has been running Gus’s Solar since 2011, and his name is on every truck and every invoice. Homeowners across Ennis know what that means: no call center, no subcontractor crew, no disappearing act after the check clears. When a storm shreds panels off West Ennis Avenue, the same team that installed systems here is the team that comes back to repair them. Background-checked, uniformed, and accountable to one owner.
Ennis customers reach us by phone at any hour, and a real person answers. Not a voicemail tree. That matters at 9 p.m. on a Saturday when you’ve spotted a crack spreading across a panel and the next front is rolling in. Our techs coordinate from the metro, but crews serving Ennis live and work in this county. We know Ellis County clay, we know Oncor’s interconnection requirements, and we know what a 1980s ranch roof looks like under a solar mount after twenty years.
Every repair carries the 90-Day Done Right Promise in writing. If it’s not right, Gus makes it right. No fine print, no arguments.
Our Solar Panel Repair Services in Ennis
Panel Replacement After Damage
Hail is the biggest panel killer in Ennis. When a March supercell drops golf-ball ice on 75119 and 75120, tempered glass on south-facing panels takes the worst of it. We replace individual damaged panels, match the existing array’s electrical specs and connector type, and verify the replacement doesn’t derate the whole string. A single panel swap in Ennis usually runs $350 to $700 installed, depending on panel wattage and roof pitch.
Microinverter Replacement
Enphase and SolarEdge microinverters sit under panels and fail quietly, usually showing up as a single panel underproducing in your monitoring app. We carry common microinverter models for Ennis customers so a replacement often happens same-day. Expect $250 to $450 per microinverter replaced, including rooftop labor and re-pairing the unit with your monitoring gateway.
Roof Leak Repair Around Mounts
Older composition shingle roofs around Ennis develop leaks where solar mounts penetrate the deck. The blackland clay under your foundation moves with moisture cycles, and that subtle settling transfers stress to roof penetrations over time. Our crews remove the affected mount, re-flash the penetration properly, and re-secure the racking. Leak repair around mounts typically runs $300 to $800 per penetration in Ennis, and we check surrounding mounts while we’re up there.
Wiring & Connector Repair
Squirrels, hail impact, and ten years of Texas sun all take a toll on DC wiring and MC4 connectors. Ground-fault errors, arc-fault trips, and production drops often trace back to a single damaged connector or nicked wire. We trace the fault with thermal imaging, replace the damaged section, and leave the array producing at spec. Wiring and connector repair in Ennis runs $180 to $500 depending on accessibility.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Ennis
We repair and service systems built on Tesla, Enphase, SolarEdge, FranklinWH, and nearly every other major brand installed across Ellis County. Because we’re an Enphase and SolarEdge service partner, we stock common inverters, microinverters, and rapid-shutdown components locally, which means faster turnaround when your production is down. Bring us any system, regardless of who installed it. We’ll figure out what’s wrong and tell you straight what it costs to fix.
If you’re already working on a repair estimate from another company, bring it in for a free second opinion. We’ll put our assessment alongside theirs, line by line.
Common Solar Panel Repair Problems We See in Ennis Homes
- Hail-cracked tempered glass. The storm tracks that sweep northeast through Ellis County from March through June put Ennis directly in the path of recurring large hail. Cracked glass exposes cells to moisture, which arcs and trips the array’s inverter. If you see spiderwebbing on a panel, call before the next front arrives.
- Production loss without visible damage. A single failing microinverter or corroded connector can silently drag a string down. If your utility bill creeps up while your monitoring shows a steady decline, something’s wrong. We diagnose it with panel-level data, not guesswork.
- Ground-fault and arc-fault error codes. Water intrusion around mounts or chewed wiring trips these safety shutdowns. Your system stops producing entirely until the fault clears. We trace the fault, repair it, and confirm the array passes rapid-shutdown compliance before we leave.
- 100-amp main panel refusing utility approval. Many 1950s-to-1980s ranch homes in Ennis still run original 100-amp panels. After a repair, Oncor frequently requires the system to meet current rapid-shutdown code, which older panels can’t support. We include the main panel upgrade in the quote up front so there’s no sticker shock at the permit desk.
Pricing for Solar Panel Repair in Ennis, TX
Straight numbers, because that’s how Gus does business. A single hail-damaged panel replacement in Ennis: $350 to $700. One microinverter swapped: $250 to $450. Wiring or connector repair: $180 to $500. Roof leak repair around a mount: $300 to $800 per penetration. Main panel upgrade for a 100-amp ranch home: $1,800 to $3,200 depending on site conditions. The price quoted is the price charged. No signature wanted tonight, and you’ll always find us at (877) 550-6892 if the number changes.
We Also Serve Cities Near Ennis
Beyond Ennis, our crews regularly work in Waxahachie, Red Oak, Lancaster, and Hutchins. Hail doesn’t respect city limits, and neither do we. Whether you’re in Ennis proper or just outside the city line, the same crew and the same 90-Day Done Right Promise apply. For a full look at what we handle, see our Solar Panel Repair service page or the Solar Panel Repair in Ennis coverage details.
Serving Ennis, TX - Our Local Coverage Area
We’re based in the Ennis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Repair in Ennis
Schedule it within a week of the storm. Cracked tempered glass lets moisture reach the cells, and that corrosion spreads fast in Ellis County’s humid spring weather. Waiting also risks an arc fault that shuts down the entire array. Call (877) 550-6892 right after the storm passes and we’ll get a tech to your roof before the next system rolls through.
Because Oncor’s interconnection standards now require rapid-shutdown compliance that many original 100-amp panels on older Ennis ranch homes can’t pass. After a repair, the utility re-inspects the system, and if the main panel doesn’t meet current code, the repair can’t be approved. We include that upgrade in the quote up front so the permit process doesn’t stall. For an exact number on your home, call (877) 550-6892.
You can replace just one panel. Modern microinverter systems on most Ennis arrays treat each panel independently, so a single shattered panel doesn’t require replacing the string. We match the replacement panel’s wattage, dimensions, and connector type to the existing array. In some cases with older string-inverter systems, we may recommend a small add-on like panel-level optimizers to prevent future single-panel failures from dragging down production. Call (877) 550-6892 and we’ll tell you what your specific array needs.
Yes. Orphaned-system takeover is a regular part of our work in Ennis. We service systems regardless of who originally installed them, and we’ll re-document the array, update monitoring access, and bring it back to spec. Bring us your last production report and your utility bill, and we’ll show you exactly what’s underperforming and what it costs to fix. Estimates are free, and we’ll wait while you think it over.
No. Repairs don’t reset or reduce your net metering credits. The system keeps its original interconnection agreement and production history. What does affect your credits is leaving a damaged array offline: every day your system isn’t producing is a day of lost export credit. That’s why we prioritize hail-season repairs in Ennis and keep common panels and inverters stocked locally. For a fast diagnosis and honest number, call (877) 550-6892.
Written by Gus Petrakis, Owner at Gus’s Solar, founded in 2011.