Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Fast, Reliable Solar Panel Repair Across Boulder City
Solar panel repair in Boulder City usually runs $180 to $1,400 depending on whether you need a microinverter swapped, a string inverter replaced, or roof work around your mounts. Most calls we take from Boulder City homeowners are either production drop alerts on a monitoring app or visible damage from wind-driven debris. Gus’s Solar sends our own crew, not a subcontractor, and we answer the phone live at (877) 550-6892.
Boulder City is different from every neighboring town, not just because of the weather, but because so much of the housing stock sits inside a designated Historic District with its own rules for what goes on a roof. That changes how repairs get done. We know the difference, and we plan for it before we pull up at your curb.
Why Gus’s Solar Is Boulder City’s Preferred Solar Panel Repair Company
Gus Petrakis started this company in 2011 and put his name on it. That matters when you are calling about a repair because the person who quotes the job is the same person accountable for the work. We are not a pop-up sales crew and we are not an out-of-state installer handing your service request to a stranger. A live person answers our phone 24/7, and when you call about a panel that stopped producing, you talk to someone who knows what an inverter is.
Our Solar Panel Repair crew has worked on systems in Boulder City for years. We have replaced rooftop junction boxes on homes near Nevada Way where the wiring was original to the house, and we have fixed arrays that failed because the original installer ignored Boulder City’s Historic Preservation Commission requirements. We also know Boulder City operates its own municipal electric utility, the Boulder City Electric Department, which runs its own net metering tariffs. That means every repair we touch gets checked against the utility’s interconnection rules, not assumed to match NV Energy’s.
We carry a 90-Day Done Right Promise in writing on every repair: if it is not right, Gus makes it right. One call brings him back. We also offer a senior and veteran discount that never expires, because a lot of Boulder City homeowners have been here a long time and they deserve straight math, not a sales pitch.
Our Solar Panel Repair Services in Boulder City
Inverter Repair & Replacement
A string inverter replacement in Boulder City typically runs $1,100 to $1,800 including labor, permitting, and the new unit. We see a lot of thermal shutdown on older inverters mounted on west-facing walls where the Mojave afternoon sun cooks them. The fix is not always swapping the unit; sometimes it is relocating the inverter to a shaded gable or adding airflow clearance. We quote the year-25 output, not the day-one brochure number. Bring us a bill, we will bring you the math.

Microinverter Replacement
Microinverters fail more quietly than string inverters, and in Boulder City we typically replace individual units for $250 to $500 including the part, roof access, and commissioning. Enphase systems are common here, and we stock replacements for most single-phase models. If your monitoring app shows one panel flatlined while its neighbors are producing, that is usually the microinverter, and it is a same-day fix in most cases.

Wiring & Connector Repair
In Boulder City’s low-humidity desert air, wiring insulation gets brittle faster than people expect. We have traced arc faults to cloth-wrapped household wiring, degraded MC4 connectors, and chewed cable runs along rafter bays. Expect to pay $180 to $450 for a connector or junction box repair, depending on roof access and whether conduit needs replacing. The Historic District often means we have to route conduit along rear eaves to keep it off the street view. We plan for that from the first visit, so it is one trip, not three.

Panel Replacement After Damage
Hail is the usual suspect here, but we also replace panels cracked by construction debris or wind-blown desert rock. A standard 400W panel replacement in Boulder City runs $450 to $750 per panel including matching the array’s make and model, roof work, and testing. If your panels sit on contributing structures in the Historic District, we will confirm placement against the city’s preservation guidelines before we touch the racking. That approval layer is unique to Boulder City, and ignoring it can mean a redo.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Boulder City
We work on SolarEdge, Enphase, Tesla, and FranklinWH systems every week across the Boulder City area. We keep common replacement parts for these brands in our local inventory, which means less waiting on a shipping label when your production is flat. If your system shows a fault code you have not seen before, call us and read it out. We will tell you over the phone whether it is urgent or can wait for a normal service window.
Common Solar Panel Repair Problems We See in Boulder City Homes
- Thermal shutdown on west-facing inverters. Boulder City sees sustained summer days above 110°F, and an inverter mounted on a sun-exposed wall can throttle or shut down entirely. We often relocate these units or add ventilation shielding.
- Deteriorated wiring in older ranch homes. The 1950s and 1960s ranch stock across Boulder City came with cloth-wrapped wiring that was never meant to sit in an attic for 70 years. We regularly repair junction boxes and conduit runs where heat has turned insulation to dust.
- Roof leaks around mounts on original roofs. Many homes near the Historic District still have early composition roofs or original substrate, and the dry desert air cycles thermal expansion harder than people expect. A small leak around a roof penetration becomes a big deal within a season.
- Historic District compliance issues on rear plane arrays. Because Boulder City’s Historic Preservation Commission often restricts panels to rear or non-street-visible roof planes, arrays end up cramped. When one panel fails on a small array, it takes a bigger share of your kWh offset with it. That raises the urgency on a fix that would be minor on a sprawling tract-home roof in Henderson.
Pricing for Solar Panel Repair in Boulder City, NV
Here is what you can expect to pay for common repairs in Boulder City:
- Microinverter replacement: $250 to $500 per unit
- String inverter replacement: $1,100 to $1,800 including labor and permitting
- Connector or junction box repair: $180 to $450
- Panel replacement after damage: $450 to $750 per panel
- Roof leak repair around mounts: $350 to $900 depending on access and scope
- Full diagnostic visit: $125, waived if you approve the repair
We offer no trip charge inside our own county, a free second opinion on any written estimate, and $40 off any repair over $200. The price we quote is the price you pay. Take two weeks, think about it, the price will be the same.
If a salesman needs an answer tonight, the answer is no. That is not how we work.
We Also Serve Cities Near Boulder City
Our Boulder City service area also covers Henderson, Whitney, Paradise, and Enterprise. If you live just across the line in one of those communities, you get the same crew, the same live phone answer, and the same written 90-day promise. Call us and tell us where you are. If we can be there today, we will say so. If not, we will tell you that too.
Serving Boulder City, NV - Our Local Coverage Area
We’re based in the Boulder City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Repair in Boulder City
Yes. If your home is a contributing structure in Boulder City’s designated Historic District, any exterior modification including solar panel placement must be approved by the Historic Preservation Commission. That includes repairs that change the panel location or alter visible conduit. We have handled dozens of these cases, and we will file the paperwork with you as part of the repair. If your system was installed without that approval, call us. We can help you get compliant and fix the system in the same project.
Yes, and that is a Boulder City-specific factor no generic solar repair page will tell you. The Boulder City Electric Department runs its own net metering tariffs, separate from NV Energy’s statewide rules. That means the value of every kilowatt-hour your repaired array produces is calculated against the city’s export rates, not the utility your neighbors in Henderson use. We build our repair recommendations off your actual bill and the city’s current tariffs. Call (877) 550-6892 and bring a bill. We will show you the math.
Usually it is a placement problem, not a hardware failure. Boulder City runs hot, above 110°F for stretches every summer, and many inverters installed years ago were mounted on west-facing walls with no airflow gap. The inverter’s thermal protection trips, the system shuts down, and it restarts when the wall cools. We see this all the time on homes built in the 1950s and 1960s. The fix is often relocating the inverter or adding a shade panel and air gap, which runs $300 to $800. A diagnostic visit can tell you which it is.
Expect us to check the roof framing before we touch the racking. Boulder City’s core housing stock was built by the Bureau of Reclamation starting in 1931, and the rafter tails and sheathing on those homes were not engineered for modern solar loads. If we find rot or structural weakness around the mounts, we will tell you in plain language what needs to happen before the leak fix. That may mean carpentry, and in some cases a partial reroof. We do not patch a leak on a failing deck and call it done.
In Boulder City’s open, low-humidity desert air, dust and fine sand settle on panels fast. Before we recommend a repair, we check soiling levels. A panel that is just dirty can read 10 to 20 percent low on a monitoring app and trigger a false alarm. We can test the array, clean the panels if needed, and recheck the numbers. If cleaning does not restore production, then we look at the hardware. That sequence saves you money and avoids replacing a perfectly good panel.
Written by Gus Petrakis, Owner at Gus’s Solar. Gus has been building and repairing solar systems across southern Nevada since 2011, and he still answers the phone.






Before
After
Before
After
Before
After