Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Solar Panel Installation Across Hurst
Solar panel installation in Hurst runs $16,500 to $34,000 for a typical 8-12 kW rooftop system before federal tax credits, and most Hurst homes need a 100-amp to 200-amp electrical panel upgrade folded into the scope. That’s the honest math we give homeowners on Pipeline Road, in the Shady Oaks neighborhoods, and across 76053 and 76054. Gus’s Solar has been doing this work since 2011, and we quote year-25 output off your actual Oncor bill, not a brochure number. Call (877) 550-6892 and bring us a bill. We’ll bring you the math.
Why Gus’s Solar Is Hurst’s Preferred Solar Panel Installation Company
Hurst homeowners have a specific set of questions when we sit down at the kitchen table. Will the panels survive Tarrant County hail? Will my 1960s-era electrical panel handle the load? Who pulls the permits and files the Oncor interconnection paperwork? We answer all three before you sign anything, and we put the answers in writing. Gus Petrakis founded this company with his name on the truck and his phone number on every estimate. That hasn’t changed in over a decade.
When a Hurst customer calls, a live person picks up. Not a ticketing portal. Not a call center three states away. If something goes wrong with your system, Gus is the one who calls you back. We work throughout the Mid-Cities corridor, and our crews know the housing stock here: the ranch homes off Harwood Road, the split-levels near Bellaire Drive, the tight hip roofs that need a custom layout instead of a one-size-fits-all array.
Our reviews from Hurst customers consistently mention the same things: the quote matched the final invoice, the crew showed up on time in uniform, and the panel upgrade was handled in the same trip as the array installation. That last part matters more in Hurst than almost anywhere else in the metroplex. We’ll explain why below.
Our Solar Panel Installation Services in Hurst
Rooftop Solar Installation
Most Hurst homes have single-story ranch or split-level footprints with low-pitch gable or hip roofs. That geometry limits south-facing square footage, so we design arrays around your actual roof planes rather than forcing a generic layout. A typical Hurst rooftop install takes two to three days once permits clear, and we flash every penetration properly. No subcontracted labor. Gus’s own crew does the work from first rail to final inspection.
Solar System Design & Permitting
Here’s where Hurst gets specific. Because so much of the city was platted and built between roughly 1960 and 1985, the original 100-amp service panels on these homes are a permitting hurdle, not a suggestion. Oncor’s interconnection requirements mean your solar array can’t be energized until the panel upgrade is done. We scope that upfront. Our design and permitting team handles the city of Hurst building permit, the HOA paperwork if you have one, and the Oncor application, so you’re not chasing paperwork across three agencies.
Solar Panel Replacement
If your existing array took hail damage from one of the spring storm cells that track through the Mid-Cities, we can replace individual panels or the full array. We stock Qcells and Canadian Solar panels locally and can typically swap damaged modules within a week. If your original installer is out of business or won’t return calls, that’s not a problem. We do second opinions on any written estimate, free, and we’ll tell you honestly whether repair beats replacement.
Roof-Mount & Tile Roof Solar
Hurst has pockets of tile roof homes mixed in with the more common composition shingle ranches. Tile requires different mounting hardware and more care during the install, because cracked tiles leak. Gus’s crew has been mounting on tile for over a decade, and we carry the flashing and hooks specific to those systems. We don’t rush a tile roof job, and we don’t hand it to a sub who’s never touched one.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We install and service equipment from Panasonic, Qcells, Canadian Solar, Enphase, and FranklinWH. For Hurst specifically, we recommend IEC 61215 hail-rated panels as a default because of where the city sits in Tarrant County’s storm corridor. Enphase microinverters are our standard choice for the Mid-Cities because they handle partial shading better on Hurst’s tree-lined lots off Precinct Line Road and Highway 26, and they satisfy rapid-shutdown code requirements cleanly. If you already have a quote with another brand, bring it in. We’ll give you a straight comparison.
Common Solar Panel Installation Problems We See in Hurst Homes
- Original 100-amp panels from the 1960s and 1970s. Entire cul-de-sacs in Hurst share the same Federal Pacific or Zinsco service panels. That’s not a quirk; it’s the subdivision era. A panel swap to 200-amp is usually required before Oncor will approve interconnection.
- Hail damage from spring convective storms. Golf-ball hail isn’t rare here. Panels without IEC 61215 impact ratings can crack or suffer micro-fractures, and the warranty fight after a storm is not one you want to have.
- Wasted south-facing roof area. Low-pitch gable and hip roofs limit the usable plane. A layout that ignores azimuth and tilt leaves you with lower kilowatt-hour offset than your bill requires. We design to your roof, not to a template.
- Electrical panel location dictating array placement. In many Hurst homes, the main service panel is on the garage wall opposite the best roof plane. That run of conduit and wire changes the install scope. We walk the roofline with you before quoting, so the number you see is the number you pay.
Pricing for Solar Panel Installation in Hurst, TX
A full rooftop solar installation in Hurst typically lands between $16,500 and $34,000 before the 30% federal tax credit, depending on system size and panel choice. That’s the honest range for this market. The 100-amp to 200-amp panel upgrade that most homes here need adds $2,500 to $4,500, and we quote it as a separate line item so you see exactly where the money goes. If another company scopes only the roof and skips the panel, you’ll find out at inspection time when the city flags the job. We’d rather tell you week one.
Rooftop solar installation on a standard Hurst ranch runs $14,000 to $22,000 for the array and mounting. Solar system design and permitting runs $800 to $1,600 as part of the full job. Solar panel replacement for hail-damaged modules runs $350 to $650 per panel installed, depending on wattage and racking compatibility. Take two weeks to think about any quote from us. The price will be the same.
We Also Serve Cities Near Hurst
Our crews work Hurst and the surrounding Mid-Cities communities every week, including Bedford, Richland Hills, North Richland Hills, and Colleyville. If you’re in one of those cities and need Solar Panel Installation, the same crew and the same 90-Day Done Right Promise apply. And if you’re in Hurst and just want a second opinion on a written estimate, call us. That’s free.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Installation in Hurst
Because Hurst was largely built out between roughly 1960 and 1985, and the original 100-amp service panels installed during that era don’t meet Oncor’s interconnection requirements for backfeeding solar power. When you add a solar array to a 100-amp panel, you’re adding another power source to a service that was sized for appliances from the Johnson administration. Oncor requires the upgrade to 200-amp before the array can be energized, and most city inspections will flag it too. We quote it as a separate line item, not buried in the solar price. Call (877) 550-6892 for an exact number on your home.
Hurst sits in one of Tarrant County’s most consistently hail-impacted corridors, and while your homeowner’s policy may cover roof damage, a cracked or micro-fractured solar panel from golf-ball hail can trigger a warranty denial if the panel wasn’t rated for impact. IEC 61215 is the impact-resistance standard that matters, and we spec it as a default here. Your insurance covers the roof. Your panel warranty covers the equipment only if it’s rated for the environment. We quote hail-rated panels from day one because taking them out later costs more than putting them in now. Estimates are free.
It adds the panel upgrade cost to your upfront investment, which pushes the payback window out slightly, but Tarrant County’s 229-plus sunny days annually and Oncor’s current export rates still keep most Hurst solar paybacks in the 8 to 11 year range even with the electrical work folded in. We run your actual 12-month utility usage through a year-25 production model, so the payback number you get is built off your bill, not a generic assumption. No brochure math. Bring us a bill and we’ll show you the real model.
Yes, and we do it as part of every Hurst install. Oncor’s interconnection application is the gate that decides when your array actually gets to turn on, and it requires the panel upgrade, the system design, and the permit all to move in sequence. We file the application, track it through Oncor’s queue, and coordinate the meter swap. If you’re getting quotes from multiple companies, ask each one whether they pull the Oncor filing themselves or leave it to you. The answer tells you a lot about how the job will actually go.
Because Hurst was subdivided and built within a tight 15-year window, often by the same builders using the same electrical contractor across an entire street or block. You’ll find the same original Federal Pacific or Zinsco 100-amp panels on half the homes in some neighborhoods. On a quiet cul-de-sac off Pipeline Road, our crew arrived for a rooftop solar install on a 1972 split-level and found the same panel we’d replaced three doors down the month before. We folded the Oncor-required upgrade into the same visit, mounted Qcells panels with Enphase microinverters on the low-pitch gable, and left with a one-trip job and a sub-9-year payback. When one house goes solar on a street like that, the neighbors usually follow. Call (877) 550-6892 and we’ll come take a look at yours.
Contact Gus’s Solar for Solar Panel Installation in Hurst
If you live in Hurst and you’re tired of out-of-state quotes that change at the door, call (877) 550-6892. Gus Petrakis puts his name on every estimate. We’ll look at your roof, your bill, and your panel, and we’ll tell you straight what the job costs and what it pays back. No signature wanted tonight. No deadline pressure. Just a local crew that’s been doing this since 2011 and answers the phone when you call. Free estimates. Live person answers, 24/7. Call today.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Hurst since 2011.