Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Solar Panel Cleaning Across Southlake
Solar panel cleaning in Southlake typically runs $180 to $340 for a full residential array, and most jobs are done in a single visit. If you’ve noticed your production numbers slipping on the Enphase app or your panels look hazy under that North Texas sun, it’s time to get them cleaned. Gus’s Solar sends our own background-checked crew to Southlake, not a sub, and we arrive in a truck with Gus Petrakis’s name on the side. Call (877) 550-6892 and a live person picks up, 24/7.
Southlake homes sit on larger lots with mature oak canopies and executive rooflines that hold onto pollen, dust, and hail debris differently than tighter suburban neighborhoods. We know this because we’re out here regularly, working around HOA architectural review requirements that push panels onto rear and east-facing slopes. That changes how panels get dirty here, and it changes how we clean them.
Why Gus’s Solar Is Southlake’s Preferred Solar Panel Cleaning Company
We’ve been cleaning panels on Southlake homes long enough to know the difference between a Timarron estate with clay tile and a newer build off Davis Boulevard with composition shingles. The rooflines are different, the access is different, and the HOA rules that dictated where your array could go are different too. Gus Petrakis started this company in 2011, and he still answers his own phone. When you call about panel cleaning in Southlake, you’re not getting routed to a call center in another state.
Our Southlake customers tell us the same thing: previous companies sent someone with a standard extension ladder who couldn’t safely reach the array over a second-story hip section, or they quoted one price and tried to change it at the driveway. We don’t do that. Our crew comes with stabilizer stands, soft-bristle brushes, deionized water systems, and the training to work around clay and concrete tile without cracking it. And our 90-Day Done Right Promise applies to cleaning work too. If it’s not right, Gus makes it right, in writing, every time.
Our Solar Panel Cleaning Services in Southlake
Residential Panel Cleaning
Most Southlake residential arrays need cleaning two to four times a year, depending on tree cover and spring pollen load. We use deionized water and soft-bristle brushes, never hard water from a garden hose, which leaves mineral spotting that actually reduces output. For homes in communities like Timarron or Monticello, where arrays often sit on rear-facing slopes to satisfy architectural review boards, we pay extra attention to early-morning dew residue that bakes on before noon.
Debris & Soiling Removal
Mature oak and pecan trees across Southlake drop pollen, sap, and leaf litter that compound on panels faster than most homeowners expect. A season of accumulated soiling can cut production by 5 to 15 percent. We remove it all, including the crust that forms when dust and dew combine over multiple weeks. Southlake’s 76092 zip code has some of the heaviest canopy cover in the metro area, which means this is one of our most-requested services here.
Post-Storm Panel Cleaning
Southlake sits in North Texas’s hail corridor, and after a storm rolls through, panels collect cracked leaf debris, shredded roofing material, and grit that blocks light and can hide microinverter faults. We recommend a post-storm inspection and cleaning even when there’s no visible panel damage. If hail hit your array, debris on the glass can mask hot spots that show up later as a drop on your true-up statement.
Bird & Critter Guard Installation
Southlake’s tree-lined acreages are pigeon and squirrel territory, and critters nesting under panels cause soiling, wiring damage, and fire risk. We install critter guard around the array perimeter to keep them out, usually during a cleaning visit so you don’t pay for a second trip. It’s a practical add-on for homes with detached workshops or rear arrays near tree lines.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Southlake
We clean and maintain panels from Qcells, SunPower, and Panasonic, the brands you’ll most often see on Southlake rooftops. Because we’re a local shop serving local customers, we keep cleaning supplies and common replacement parts for these systems in our Dallas-Fort Worth metro office, so we’re not waiting on a shipment when your array needs attention. If your system runs Enphase microinverters, we check the cooling fins during cleaning, because pollen and dust buildup on those components quietly trims production. If it’s SolarEdge or Tesla, we know how those strings behave after hail and heat too. The brand on your roof doesn’t change how we clean, but it does change what we check while we’re up there.
Common Solar Panel Cleaning Problems We See in Southlake Homes
- HOA-mandated east-facing arrays collecting baked-on pollen. Southlake’s architectural review boards frequently push installs off street-visible slopes, which means panels face the morning sun with dew still on the glass. Pollen and dust settle into that moisture and bake on by afternoon. This is the single most common soiling pattern we see in the 76092 area.
- Post-hail debris masking panel or microinverter damage. After a hail event, leaf litter and roofing grit sit on the glass and absorb sunlight as heat. Production drops, and homeowners don’t notice until the utility true-up arrives. Cleaning right after a storm lets us inspect for microinverter faults while the evidence is fresh.
- Clay and concrete tile roofs requiring specialized access. A lot of Southlake’s executive homes, especially in Timarron and surrounding communities, have tile profiles that crack easily under the wrong ladder setup. Sending a standard truck without a stabilizer stand wastes a trip. We bring the right equipment the first time.
- Detached workshops and oversized service drives complicating access. Southlake acreage properties often have arrays on detached structures set back from the main house. Long service drives and gated entries mean we plan access ahead, not figure it out on arrival.
Pricing for Solar Panel Cleaning in Southlake, TX
A standard residential panel cleaning in Southlake runs $180 to $340. Small arrays under 20 panels sit at the lower end. Larger systems of 30 panels or more, especially on second-story or tile roofs with access complications, run toward the top of that range. If you’re adding critter guard installation, expect $250 to $500 more depending on array perimeter and roof type. Post-storm cleaning with a full inspection usually falls between $220 and $380, because we’re checking inverters and connections while we’re up there.
We quote the price before we schedule, and that’s the price you pay. No surprise line items at the driveway. And if you’re a senior or veteran in Southlake, you get 10 percent off, every time. Call (877) 550-6892 for a free estimate. Bring us your last utility bill and we’ll show you exactly what cleaning can recover in your specific system.
We Also Serve Cities Near Southlake
If you’re in Colleyville, Grapevine, Roanoke, or Trophy Club, our crews serve those communities with the same one-trip service and the same 90-Day Done Right Promise. Southlake customers often have family or business properties in these nearby cities, and we make it easy to schedule multiple locations in one call. Learn more about our Solar Panel Cleaning team or see how we serve Southlake throughout the year.
Serving Southlake, TX - Our Local Coverage Area
We’re based in the Southlake area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Cleaning in Southlake
Panels placed on rear or east-facing rooflines to satisfy Southlake architectural review boards collect more morning dew residue and pollen crust than south-facing arrays, so they typically need cleaning three to four times a year instead of two. East-facing panels are wet with dew during the exact morning hours when temperatures are cool enough for peak output, and that moisture binds pollen and dust to the glass. If your array faces east because your HOA required it, budget for more frequent cleaning to keep production where it should be. Call (877) 550-6892 and we’ll assess your specific roofline.
Yes, we clean panels on clay and concrete tile roofs without cracking or shifting tiles, by using stabilizer stands, roof ladders, and soft-bristle brushes that never contact the tile surface directly. Southlake’s executive homes frequently feature tile profiles, and our crew has handled hundreds of them. We walk the roof once before starting to mark fragile areas, and we never drag equipment across tile. If a tile is already cracked from hail or age, we point it out before we begin so there’s no confusion later.
Yes, after any significant hail event in Southlake, you should have panels inspected and cleaned even when the glass looks fine. Hail can crack microinverter housings, loosen wire connections, and deposit debris that blocks light and absorbs heat. The panels themselves may be impact-rated and undamaged, but the buildup on top hides faults until production drops. A post-storm cleaning in Southlake runs $220 to $380 and includes the inspection while we’re already on the roof.
Grid interruptions and rapid shutdown events themselves do not make panels dirty, but they often coincide with storms that leave debris, and after any extended outage, we recommend a visual check and cleaning if soiling accumulated. Southlake is in Oncor’s territory within the deregulated Texas market, and after a storm that knocks out power, panels often sit under leaf litter and hail grit until someone addresses them. A cleaning right after an outage ensures you’re back to full production when buyback credits matter most. Call (877) 550-6892 and we’ll schedule around your outage recovery.
Yes, cleaning typically recovers 5 to 15 percent of lost production, which directly increases the kWh you sell back to your retail electric provider under a buyback plan. Southlake homeowners in Oncor’s territory have to choose their own provider, and the buyback rate you negotiated only pays you for what your system actually exports. A dirty array exports less. If your true-up statement shows a surprise drop, cleaning is the cheapest correction available before you consider any repair. Call (877) 550-6892 and we’ll help you read your bill to see what cleaning can recover.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Southlake and surrounding North Texas communities since 2011.