Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Fast, Reliable Solar Panel Cleaning Across Millbrae
If your panels in Millbrae are coated with marine layer residue and a thin film of aviation exhaust, you’re losing production every single day the system sits dirty. A typical residential cleaning in Millbrae costs between $160 and $280, depending on roof pitch and array size, and most jobs are done in under two hours. We’ve been cleaning arrays across the 94030 zip code for years, and if you’re watching your true-up statement drift the wrong way, call (877) 550-6892 and we’ll get you on the schedule, usually within the week.
Millbrae is a small town and word travels. We know the streets here, from the flatlands near the Caltrain corridor up to the hillside lots off Murchison Drive. When we show up at your door, you won’t be meeting a stranger who got lost in Burlingame. You’ll meet a crew that knows exactly which roofs catch the morning marine layer and which ones burn it off by 9 a.m. That’s the entire difference between a cleaning that actually restores production and one that just makes the glass look nice.
Key Takeaways:
- Typical residential cleaning in Millbrae runs $160-$280; commercial arrays run $2-$4 per panel.
- Morning marine layer and proximity to SFO mean Millbrae panels soil faster than South Bay homes.
- We schedule cleanings so they finish before peak generation windows, not whenever we happen to roll through.
- Bird guard installation and debris removal are standard parts of what we check on every Millbrae visit.
- Every job is backed by the 90-Day Done Right Promise. If it’s not right, Gus makes it right.
Why Gus’s Solar Is Millbrae’s Preferred Solar Panel Cleaning Company
You probably didn’t buy your panels from a door-knocker, so why let just anyone service them? Gus Petrakis founded Gus’s Solar in 2011, and his name is on the truck, the building, and every invoice we hand you. We don’t subcontract the work out and we don’t disappear after the check clears. When a Millbrae homeowner calls us with a question about a SolarEdge inverter or a panel that looks hazy after a storm, they get a live person on the phone, 24/7. Not a ticketing portal, not a call center three states away.
Millbrae isn’t a big city, and our reputation here is built on showing up when we say we will. A typical response to most Millbrae addresses is one to two business days for scheduled cleanings, and we can often get to urgent situations the same day if birds have built a nest under your array or you’ve just come through a fall storm that left debris across the panels. L.O.C.A.L. isn’t just a slogan on our van. Local roots, On time, Community first, Accountable, Loyal. Gus wrote those out years ago as the operating code, and that’s how we run every Millbrae job.
We also understand what this specific corner of the Peninsula does to solar equipment. More on that below, because it matters more than most homeowners realize.
Our Solar Panel Cleaning Services in Millbrae
Here’s what we actually do when we come to your Millbrae home, and why each part matters for this climate and this airspace.
Residential Panel Cleaning
We use low-pressure deionized water and soft brushes on residential arrays across Millbrae, from the 1950s ranch homes near the flatlands to the steeper two-story lots climbing west toward the ridgeline. Deionized water matters here more than in most Peninsula towns. Millbrae’s marine layer leaves a fine mineral film that regular tap water just smears around, and deionized water lifts it without streaking. We also inspect the entire array while we’re up there: rack bolts, wire clips, rapid shutdown modules, and any signs of critter activity under the panels.

Commercial Array Cleaning
Commercial jobs in Millbrae are mostly smaller professional buildings and a few multi-tenant properties near El Camino Real and Millbrae Avenue. We price these at $2 to $4 per panel, depending on access and how often the array gets cleaned. If you’re a property manager with tenants asking about energy costs, a clean array is one of the cheapest ways to keep the building’s production report looking right. We can schedule commercial cleanings quarterly, semi-annually, or after major weather events.

Bird & Critter Guard Installation
This might be the most underrated service for Millbrae homes. Pigeons nest under panels all over the flatlands near the Caltrain corridor, and their droppings are acidic enough to eat at wiring insulation and block rapid shutdown access. We install steel mesh bird guard that clips around the entire perimeter of the array, keeping birds out without trapping any that are already there. Every cleaning visit includes a bird guard check, and we’ll tell you honestly if you need it. Many Millbrae homes do.

Debris & Soiling Removal
Fall and winter bring different problems for Millbrae panels. The marine layer condenses on the glass overnight, and anything airborne sticks to that moisture. Then the wind picks up and blows dust, leaf litter, and sometimes fine grit from construction sites onto the array. We remove loose debris by hand or with soft tools, then clean the glass properly. On homes near the BART station or along major roads, we often find brake dust and asphalt particles that require a second pass.
For homeowners who want to stop thinking about their array’s cleanliness entirely, we offer Solar Panel Cleaning plans on a quarterly or semi-annual schedule for Millbrae customers. One call gets it set up, and we handle the rest from there.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Millbrae
We clean and maintain panels from every major manufacturer, and Millbrae homes run a good mix. Qcells panels are common on newer installations here, especially in the hillside neighborhoods where homeowners rebuilt arrays after 2015. REC panels show up frequently on the west side, and Panasonic and SunPower arrays are scattered throughout the flatlands. Our crew is trained on the specific glass and coating properties of each brand, and we adjust pressure, water temperature, and technique accordingly. We don’t stock parts for every brand at a Millbrae address, but most cleaning-related hardware like clips, wire ties, and bird guard clips are on the truck when we arrive. If something looks worn or damaged during a cleaning, we’ll show you photos and quote the repair on the spot. No pressure. Take two weeks. The price will be the same.
Common Solar Panel Cleaning Problems We See in Millbrae Homes
After years of servicing arrays across Millbrae, these are the issues that come up most often. They’re specific to this town’s air, geography, and building stock.
- Aviation exhaust film from SFO approach paths. Homes in the 94030 zip code are directly under active flight corridors. A gray, slightly oily film builds on panel glass over time. It doesn’t rinse off with rain because it’s bonded to the surface, and it gradually eats into production. We see it on nearly every Millbrae home we clean.
- Marine layer residue on morning-facing arrays. Millbrae’s fog isn’t as thick as what Pacifica gets, but it arrives every summer morning. That moisture condenses on cool glass, and anything suspended in the air sticks to it. Panels on the flatlands near the Caltrain corridor pick this up more than hillside homes above the fog deck.
- Pigeon nesting under panels near the tracks. The flatland homes between El Camino and the BART/Caltrain right-of-way have a real pigeon problem. Birds get under the panels, build nests, and their droppings accumulate in places you can’t see from the ground. By the time you notice it, the damage is done.
- Debris accumulation on low-slope ranch home roofs. Many of Millbrae’s 1950s and 1960s ranch homes have shallow roof pitches. Debris doesn’t slide off as readily as it does on steeper hillside roofs, so leaves, twigs, and dirt pile up around the panel edges and along the bottom row. That partial shading causes hotspots and uneven cell wear over time.
Pricing for Solar Panel Cleaning in Millbrae, CA
Let’s give you real numbers, because most companies won’t put them on a website. A typical residential array in Millbrae runs 12 to 24 panels. Cleaning that array costs between $160 and $280, with most homes landing around $200. Larger arrays, steeper roof pitches on the hillside streets above Murchison Drive, and bad access drove the price toward the top of that range. Commercial arrays run $2 to $4 per panel, with a minimum of $250. Bird guard installation is priced separately and depends on the perimeter footage of your array, but most Millbrae ranch homes fall between $500 and $900 for complete guard installation. Every cleaning quote is upfront, and the number we give you is the number you pay. No trip charges inside our own county. Senior and veteran discount of 10% applies to every job, every time. Call (877) 550-6892 for an exact quote. Bring me a bill, I’ll bring you the math.
We Also Serve Cities Near Millbrae
Our crews cover Millbrae and the surrounding Peninsula towns. If you live in San Bruno, Burlingame, Hillsborough, or South San Francisco, the same crew and the same 90-Day Done Right Promise apply. South San Francisco and San Bruno sit under the same flight paths, so many of the cleaning issues we handle there are identical. We coordinate schedules from our Bay Area office so you’re not waiting on a truck that has to cross a bridge.
Serving Millbrae, CA - Our Local Coverage Area
We’re based in the Millbrae area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Cleaning in Millbrae
Yes, and this is unique to Millbrae. If your array required an FAA obstruction evaluation or glare study because of SFO approach paths, the cleaning method matters. High-pressure spray can strip the low-reflectivity coating that your permit approval is based on, which technically puts you out of compliance. We clean with low-pressure deionized water and soft brushes specifically to preserve that coating, and we document panel orientation before and after so your compliance file stays intact. If you’re not sure whether your array required an FAA study, call (877) 550-6892 and we’ll help you figure it out.
Cleaning should be scheduled for late morning or early afternoon, after the marine layer burns off but before the hottest part of the day. Wet glass under direct sun dries too quickly and streaks, especially with deionized water. On flatland Millbrae homes the fog lingers until 10 or 11 a.m. in summer, so we typically arrive between 10:30 and 1:00. Panels get maximum sun exposure right after cleaning, and noon-to-4 p.m. is the peak generation window. A cleaning that finishes at 2:30 means the array produces at full capacity for the last hour and a half of peak.
Yes. Hillside homes on the western slopes above roughly 500 feet often sit above the fog deck entirely. They don’t collect marine layer residue the way flatland homes do, but they get more direct sun, more wind-blown dust, and more heat-related soiling. Those arrays typically need cleaning every 12 to 18 months. Flatland homes near the Caltrain corridor collect aviation exhaust and rail dust much faster, and they benefit from cleaning every 6 to 12 months. If you’re unsure which category your home falls into, call us. We know these streets.
Bird droppings themselves don’t start fires, but they can absolutely cause inverter faults and create conditions that increase risk. When a large deposit sits on one cell, that cell runs hotter than its neighbors, which degrades production and can trigger a hot spot. Inside the panel, uneven heating stresses the bypass diodes. If droppings accumulate around wiring connections and junction boxes, they can corrode insulation and cause arcing. The fire risk is real if arcing meets dry nest material. We clean away droppings on every visit and we recommend bird guard for any Millbrae home with active nesting. Call (877) 550-6892 if you’ve seen birds under your array.
Yes, directly. Your true-up statement reflects the difference between what your home consumed and what your array produced over a 12-month period. A dirty array underproduces every single day, and that deficit shows up as higher charges on your annual statement. We’ve seen Millbrae homes with 15 to 20 panels regain between 6% and 12% of their output after one cleaning. Over a year, that’s real money on a true-up bill. If you’re watching your production numbers drop month over month, clean panels are the cheapest fix. The math is straightforward: a $200 cleaning that restores 10% of a $180 monthly bill pays for itself in under two months.
If your panels are dirty and you’re in Millbrae, call (877) 550-6892 for a free estimate. A live person answers. We’ll tell you honestly whether cleaning is worth it for your array, and if it is, we’ll be out within the week. If it’s not, we’ll tell you that too. That’s how Gus has run this business since 2011.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Millbrae and the surrounding Peninsula communities since 2011.






Before
After
Before
After
Before
After