Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Fast, Reliable Solar Panel Cleaning Across Kyle
Solar panel cleaning in Kyle typically runs $150 to $300 for a standard residential array, and most jobs wrap up in under two hours. We schedule within 48 hours for most Kyle homes, and if your production numbers have dropped, we’ll come out and tell you honestly whether cleaning will fix it or if something else is going on. Call (877) 550-6892 and you’ll get a live person, not a voicemail.
If you live in Plum Creek, Waterloo, or any of the dozens of new subdivisions off Kohlers Crossing, you’ve watched your panels collect the same yellow-green film we see on every roof in Hays County. It’s cedar pollen, oak pollen, and a fine gray dust that drifts over from the I-35 corridor. Left alone, it cuts into your kWh production and eats away at the payback you were promised when you bought the system.
Why Gus’s Solar Is Kyle’s Preferred Solar Panel Cleaning Company
Gus Petrakis has been running Solar Panel Cleaning crews across Central Texas since 2011, and his name is on every truck that pulls into Kyle. That matters when you’re letting someone onto a roof you’re still paying a mortgage on. The crew shows up in uniform, background-checked, and they know the difference between a Lennar roof and a DR Horton roof because they’ve walked hundreds of both.
We’ve cleaned panels on homes throughout Kyle, from the older streets near downtown to the newest phases off Marketplace Avenue. Homeowners call us for one reason mostly: their Enphase or SolarEdge app shows production sliding month after month and they want to know if cleaning will bring it back. We give you a straight answer before we touch a panel. If cleaning won’t restore your output, we’ll say so and point you toward the actual problem instead of selling you a wash you don’t need.
Our crews get to Kyle fast because we’re already running routes through Hays County every week. Same-week scheduling is standard, not a favor. And every cleaning carries the same 90-Day Done Right Promise as our installs. If something’s not right, Gus comes back and makes it right. That’s in writing.
Our Solar Panel Cleaning Services in Kyle
Residential Panel Cleaning
The standard residential cleaning in Kyle runs $150 to $300 depending on array size, roof pitch, and how long it’s been since the last wash. Most two-story production homes in Plum Creek and Waterloo fall in the $180 to $240 range. We use deionized water and soft brushes, never pressure washers, because the anti-reflective coating on your REC, Qcells, or SunPower panels will etch permanently if you hit it wrong. In Kyle’s hard Edwards Aquifer water, that’s not a maybe. It’s a guarantee if somebody shows up with a hose and a squeegee.

Commercial Array Cleaning
Kyle’s commercial rooftops sit low and flat, which means they collect everything: pollen, construction dust from infill development, and the constant film of I-35 exhaust. We clean ground-level and rooftop arrays for the retail and office buildings along I-35 and Kohlers Crossing, with pricing based on panel count and soiling level. A 100-panel commercial array in Kyle typically runs $400 to $650 per cleaning. We’ll work around your business hours so you don’t lose rooftop access during the day.

Bird & Critter Guard Installation
Pigeons and grackles love the shade under a panel array, and Kyle’s new-construction lots don’t have the mature tree canopy to keep them away. Once birds nest under your panels, you’re looking at droppings that eat production, corroded wiring, and a fire hazard you don’t want. We install mesh guard around the array perimeter, typically $350 to $500 for a standard Kyle residential system. It keeps the birds out, keeps your roof warranty intact, and stops the acid damage before it starts.

Debris & Soiling Removal
After a Hill Country thunderstorm or a spring haboob, panels in Kyle end up under a layer of dirt, leaf litter, and whatever the wind pulled off nearby construction sites. A standard cleaning removes regular soiling, but heavy debris caked on for weeks or months needs a deeper process: pre-soak, soft agitation, deionized rinse. Post-storm and heavy-soil cleaning in Kyle runs $200 to $350 for a typical home. We see a spike in calls every March and April when the cedar hits, and again in August when dust settles over everything.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Kyle
We clean every major panel brand you’ll find on Kyle rooftops: Qcells, REC, SunPower, and everything in between. The process doesn’t change much from brand to brand, but the stakes do. A Qcells or REC panel has an anti-reflective coating that soft water and a soft brush preserve, and hard tap water destroys. We stock the right equipment for every array we service in Kyle, so there’s no improvisation on your roof. If your system is still under manufacturer warranty, we clean it the way the warranty requires, because we’re not going to be the reason a claim gets denied.
Common Solar Panel Cleaning Problems We See in Kyle Homes
- Spring pollen bonding with I-35 dust. Kyle’s cedar and oak pollen is sticky on its own. Mixed with the fine gray dust that drifts from the interstate corridor, it creates a film that rain won’t wash off. We see 15 to 25 percent production drops during peak pollen season on panels that haven’t been cleaned since winter.
- Hard water mineral etching from DIY cleaning. A homeowner with a garden hose and good intentions can permanently damage panels faster than any hailstorm. Kyle’s water is hard, and when it evaporates on hot panel glass it leaves calcium deposits that bake in. Once that anti-reflective coating is etched, no cleaning brings it back.
- Pressure washer damage on builder-grade roofs. We’ve pulled up to homes where someone blasted their panels with a gas pressure washer to “really get them clean.” What they actually did was compromise the panel seals and void the manufacturer warranty. The Lennar home we serviced in Plum Creek had microcracks already forming from exactly this.
- Deferred cleaning because of HOA confusion. A lot of Kyle homeowners think their HOA controls who can touch their panels or whether they can clean them at all. That delay means months of production loss while the array sits under an accumulating film. Texas Property Code is clear on this, and we’ll walk you through it if your HOA pushes back.
Pricing for Solar Panel Cleaning in Kyle, TX
A standard residential panel cleaning in Kyle runs $150 to $300 for most homes. Smaller arrays under 20 panels fall toward the low end. Two-story homes with steep roof pitches run closer to $250 or $300 because the work takes longer and requires more fall protection. Heavy soiling, post-storm debris, or bird-dropping buildup adds $50 to $100 to the base clean. Commercial arrays are priced by panel count, typically $4 to $6.50 per panel depending on access and soiling level.
You’ll get a firm number before we start, not an estimate range that grows once we’re on the roof. The price we quote is the price you pay. And if another company gave you a written estimate, bring it to us for a free second opinion. We’ll tell you if they were fair, high, or low.
We Also Serve Cities Near Kyle
Our crews run routes through Hays County every week, so if you’re just down the road, we’ll still come out. We serve homes in Buda, San Marcos, Lockhart, and Shady Hollow with the same pricing and the same 90-Day Done Right Promise. Wherever you are in the 78640 corridor, call (877) 550-6892 and we’ll get you scheduled.
Serving Kyle, TX - Our Local Coverage Area
We’re based in the Kyle area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Cleaning in Kyle
Yes, it’s a real production hit. We’ve measured 15 to 25 percent drops on Kyle arrays during peak cedar and oak season, and the Lennar build we serviced in Plum Creek was down 22 percent before cleaning restored it. Pollen is sticky and light-colored, so it creates a film that diffuses light before it reaches the cell. It’s not cosmetic. It’s lost kilowatt-hours.
No. Texas Property Code §202.010 prevents HOAs from banning solar panels or dictating how you maintain them, and that includes cleaning. Your HOA can enforce “community appearance” standards, but they cannot require you to hire a specific vendor. If your HOA board or property manager tells you otherwise, call us and we’ll help you sort it out. Call (877) 550-6892 for the exact language to send them.
Twice a year is the right rhythm for most Kyle homes: once after spring pollen season ends in May, and once after the dusty summer months wrap up in September. That aligns with our pollen and haboob seasons and keeps your array producing at its modeled offset. If you’re on a net metering plan where every kilowatt counts toward your credit, quarterly cleaning is worth the marginal cost. A quarterly plan in Kyle runs about $120 to $180 per visit for a standard residential array.
Yes, it will. Kyle’s water comes from the Edwards Aquifer and it’s hard enough to leave mineral deposits when it dries on hot glass. Those deposits bake into the anti-reflective coating on REC, Qcells, and SunPower panels and permanently etch them. We use deionized water only, which leaves zero residue. It costs more than a hose, but it’s the difference between a 25-year panel and one that’s already compromised by year five.
Probably, and here’s why. New construction in Kyle means your panels went up on a house that was still settling, with construction dust in the air and crews walking the roof. The first spring after you close brings pollen that lands on whatever dust was already baked onto the glass from the build. We clean plenty of first-year systems in Plum Creek and Waterloo where production has already dropped by double digits. A first-year clean runs the same $150 to $300, and it’s worth doing sooner rather than later. Call (877) 550-6892 and we’ll come take a look.
Get Your Kyle Panels Cleaned Right
If your production app shows a slide, or your panels look like they’ve been through a dust storm, call (877) 550-6892. You’ll reach a live person who can tell you honestly whether a cleaning will restore your output or whether something else is going on. We’ll give you a firm price before we touch your roof, and we’ll back the work with the 90-Day Done Right Promise. Gus’s Solar has been cleaning panels across Hays County since 2011, and we’re not going anywhere. Take two weeks if you need to think about it. The price will be the same.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Kyle since 2011.






Before
After
Before
After
Before
After