Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Fast, Reliable Solar Battery Storage & Backup Across Templeton
Solar battery storage in Templeton costs $9,500 to $18,500 fully installed for most homes, before the 30% federal tax credit, and a typical retrofit on an existing array runs $7,800 to $14,200. We schedule most Templeton battery installs within 7 to 10 days and our crew knows this town’s peculiar morning fog problem better than anyone. If you’re tired of watching PG&E rates climb while your panels sit idle under the marine layer, call us at (877) 550-6892 and we’ll give you a straight answer on what a battery will actually save you. No pressure, no signature-today routine. Bring us a bill, we’ll bring you the math.
Gus Petrakis started Solar Battery Storage & Backup work the same way he started the panel business: with a truck, a license, and a phone that rings when customers call. We don’t send a call center. We send Gus’s own crew.
Why Gus’s Solar Is Templeton’s Preferred Solar Battery Storage & Backup Company
Templeton homeowners keep calling us back because we show up when we say we will and we don’t hand the work off to a sub. Gus’s crew installs every battery, runs every conduit, and programs every discharge schedule. When something’s not right, one call brings Gus back. That’s the 90-Day Done Right Promise, in writing on every job.
We work all over the 93465 ZIP code: Oakview Ranch, the Vineyard Drive corridor, West Templeton off Santa Rita Road, and the newer custom builds along Highway 46 West. Rural ranch homes, agricultural parcels, small wineries. Each one has a different load profile and a different reason the fog matters. A generic installer might size your battery from a Paso Robles production table. We don’t. We read your actual bill, look at your actual usage curve, and factor in the Templeton Gap marine layer before we quote you anything.
Our phones are answered by a live person 24/7. Not a voicemail. Not a ticketing portal. If you call at 6 a.m. because your backup didn’t kick in during an outage, a human picks up. For Templeton, that matters. PG&E public-safety power shutoff events and wind-related outages aren’t theoretical here.
Our Solar Battery Storage & Backup Services in Templeton
Tesla Powerwall Installation
A Tesla Powerwall 3 installation in Templeton typically runs $12,500 to $16,800 for a single unit with full integration. The Powerwall’s biggest advantage for Templeton homes is its fast discharge response, which matters when a fog-delayed morning suddenly clears and your production spikes. We configure Powerwalls to hold reserve capacity through the marine-layer window so you’re not pulling grid power at peak rates before your panels wake up. Our team installs and services Tesla equipment directly, with local parts availability for faster turnaround than shipping out of state.

Enphase IQ Battery Installation
Enphase IQ Battery 5P systems run $3,200 to $4,800 per module plus installation, with most Templeton homes needing two to three modules for whole-home coverage. Enphase works especially well with the microinverter arrays common on Templeton’s 1970s through 1990s ranch homes, because the battery communicates directly with each panel’s inverter. If your existing Enphase system was installed before 2020, we can often add IQ batteries without replacing the entire inverter fleet, keeping project costs down.

Whole-Home Backup Power
Whole-home backup in Templeton means different things depending on your parcel size and load. A standard 2,000-square-foot ranch off Vineyard Drive can usually get critical-load backup from two IQ 5P batteries or one Powerwall 3. Larger agricultural properties with well pumps, barn circuits, and tasting-room refrigeration need more. We map your breaker panel, identify what must stay running during an outage, and size the system so you’re not spending $20,000 to back up circuits you only use twice a year. Gus quotes the year-25 output, not the day-one brochure number.

Battery Retrofit for Existing Solar
If you already have panels and want to add storage, Templeton is one of the most financially compelling places in the county to do it under NEM 3.0. Retrofit costs here typically run $7,800 to $14,200, depending on whether your existing inverter supports AC coupling or needs a replacement. The Templeton Gap fog means your panels produce less in the morning than Paso Robles systems, so a retrofit that correctly shifts your stored energy to evening peak hours recovers more value than the same retrofit 5 miles north. We do a full inverter compatibility check before quoting, and we won’t sell you a battery that your existing system can’t properly charge.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Templeton
We install and maintain FranklinWH, Tesla, and Enphase battery systems in Templeton, along with SolarEdge inverter integration. We stock common replacement parts and firmware tools for these systems locally, which means a FranklinWH aPower control board swap or a Tesla gateway reprogramming doesn’t require waiting on a regional service depot. If you have an existing battery that wasn’t installed by us, we’ll still troubleshoot it, repair it, or expand it. We’d rather keep your system running than sell you a new one.
Common Solar Battery Storage & Backup Problems We See in Templeton Homes
- Undersized batteries from sunny-weather modeling. Installers who size batteries using Paso Robles production data leave Templeton homes undercharged on foggy mornings. The battery drains too early and the home pulls grid power during the most expensive TOU hours, erasing much of the savings the system was supposed to deliver.
- AG-4 and AG-5 demand-charge misses on agricultural properties. Vineyard and ranch operations in Templeton with PG&E agricultural schedules often have morning well-pump spikes. If the battery’s discharge logic isn’t programmed to shave those demand charges, the owner leaves thousands of dollars on the table every year. We analyze your actual rate schedule, not a generic residential profile.
- Battery wall-mounts on old barn and outbuilding walls. Many Templeton properties predate modern structural codes. A heavy Powerwall or FranklinWH stack mounted to an unreinforced 1970s outbuilding wall is a genuine safety problem. We inspect backing, bracing, and load path before we mount anything. If it needs reinforcement, we tell you what and why.
- Fog-delayed charging cycles on NEM 3.0. Under NEM 3.0, export credits dropped substantially. A battery that charges too late in the solar day because the system expects full production by 9 a.m. will miss the peak-rate arbitrage window. Templeton’s marine layer makes this a regular issue. We reprogram charge and discharge windows for the actual production curve you get here, not the curve a computer model assumes.
Pricing for Solar Battery Storage & Backup in Templeton, CA
Here’s what Templeton homeowners should expect to pay, installed, before the 30% federal tax credit:
| Service | Typical Templeton Price Range |
|---|---|
| Single Tesla Powerwall 3, installed | $12,500 - $16,800 |
| Enphase IQ Battery 5P (per module, installed) | $3,200 - $4,800 |
| Battery retrofit for existing solar (AC coupled) | $7,800 - $12,400 |
| Whole-home backup (two IQ 5P or one Powerwall 3) | $11,000 - $18,500 |
| Battery replacement or expansion | $2,900 - $9,500 depending on system |
The biggest variables in Templeton are your existing inverter’s AC-coupling compatibility, whether your main panel needs a service upgrade for the battery breaker, and how much backup capacity your home actually requires. We quote off your real utility bill and your real usage data, not a brochure estimate. Estimates are free, and there’s no trip charge inside our own county. Senior and veteran homeowners get a 10% discount that never expires.
We Also Serve Cities Near Templeton
Our crews work throughout San Luis Obispo County’s north end, including Atascadero, Paso Robles, Morro Bay, and Los Osos. If you’re in one of those communities and need the same honest battery sizing and local weather-aware programming, we serve the entire Templeton area from Atascadero to the coast. Same crew, same promises, same phone number.
Serving Templeton, CA - Our Local Coverage Area
We’re based in the Templeton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Battery Storage & Backup in Templeton
Yes, and it’s measurable. Templeton’s position in the Templeton Gap means the marine layer suppresses early-morning solar production, typically delaying meaningful generation by 1 to 3 hours compared to Paso Robles. If your battery charges from solar during those foggy hours, it may start the evening with less stored energy than a system in a sunnier town. We address this by programming later charge-start windows and prioritizing afternoon charging, when the marine layer has cleared and production peaks. This is precisely the local calculation most solar storage pages never make, and it’s the difference between a battery that actually covers your evening peak and one that silently underdelivers. Call (877) 550-6892 and we’ll run your numbers with the fog factored in.
Yes, but only if the battery’s dispatch logic is programmed for demand-charge shaving, not just time-of-use shifting. AG-4 and AG-5 schedules bill on peak demand in kilowatts, and a winery’s morning well pumps, refrigeration compressors, and tasting-room HVAC can create demand spikes that a residential-profile battery would miss. Our crew recently retrofitted an Enphase IQ Battery 5P system for a ranch-style home off Vineyard Drive where the homeowner’s existing array was already offsetting a large kWh load, but Time-of-Use rates meant every morning fog delay was costing them peak-hour credits. We reprogrammed the battery’s discharge schedule to bridge through the marine-layer window and reconfigured the inverter settings for a later solar production start. After a month, their true-up statement showed a 22% reduction in grid pull during the highest-cost hours. For winery and vineyard operations, the same kind of programming work can shave thousands off annual demand charges. Bring us a bill and we’ll show you the math.
Because the Templeton Gap marine layer burns off later than inland areas, south- and southwest-facing panels capture the strongest afternoon sun when the sky has fully cleared and your battery is doing its main charging. East-facing panels waste limited production on foggy mornings and leave your battery undercharged for evening peak hours. If you’re adding panels with a battery in Templeton, we recommend a southwest bias on the array, which typically produces more usable stored energy per installed watt than a true-south or east-facing layout here.
Not always. Many Templeton ranch homes built between the 1970s and 1990s have string-inverter or first-generation microinverter systems that can support an AC-coupled battery without replacing the panels. What matters is the inverter’s compatibility, the system’s age, and whether the original array’s production curve matches the battery’s charging envelope. Some older SolarEdge or early Enphase inverters lack the communication protocols modern batteries need, in which case we’ll tell you exactly what the replacement cost is before you spend anything. We don’t push new panels unless the existing ones actually limit what the battery can do.
Under NEM 2.0, solar-alone systems in Templeton could export at near-retail rates and batteries were mostly about backup. Under NEM 3.0, export credits dropped by roughly 75%, so the financial case now depends on storing your own production and using it during high-cost TOU windows. For Templeton specifically, the fog delay makes this even more important. A battery system sized and programmed for the marine layer typically recovers its cost through avoided grid purchases in 7 to 10 years, compared to 10 to 14 for solar-only under NEM 3.0. We’ll run the year-25 numbers, not the day-one brochure figure. Take two weeks. Think about it. The price will be the same.
If you’re in Templeton and want a battery system sized for the fog, the rate schedule, and the way you actually use power, call Gus’s Solar at (877) 550-6892. We answer live, we quote honest numbers, and we won’t ask you to sign anything tonight. If a salesman needs an answer tonight, the answer is no. That’s not how we work.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Templeton and San Luis Obispo County with solar battery storage and backup since 2011.






Before
After
Before
After
Before
After