Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Fast, Reliable EV Charger Installation Across Princeton
EV charger installation in Princeton typically runs $450-$1,200 for a standard Level 2 setup, and in most of the 2015-2025 tract homes around 75407 we can have you charging same week. We know Princeton’s subdivisions, its HOAs, and the 200-amp panels that came standard in nearly every house built here after 2018. If you live in Trails at Riverstone, Eastridge, Arcadia Farms, or anywhere else in Princeton, call (877) 550-6892 and you’ll get a real person, not a call center.
Why Gus’s Solar Is Princeton’s Preferred EV Charger Installation Company
Gus Petrakis founded Gus’s Solar in 2011, and he still answers his own phone. That matters in Princeton, where a lot of homeowners got burned by out-of-state outfits that quoted one number over the phone and another at the door. We do not do that. The price we quote is the price you pay, and we give you two weeks to think about it. If a salesman needs an answer tonight, the answer is no.
Our team has wired chargers in Princeton subdivisions from Monte Carlo to Winchester Run, and we know what these HOAs expect before we ever pull a permit. Background-checked, uniformed technicians show up on time, do the work clean, and leave your garage looking better than they found it. Every job carries the 90-Day Done Right Promise: if it’s not right, Gus makes it right, in writing.
Princeton homeowners who call us get a live person 24/7. Not a voicemail. Not a ticketing portal. Gus or one of his people, every time.
Our EV Charger Installation Services in Princeton
We handle the full EV Charger Installation scope, but here’s what Princeton homeowners actually call us for:
Level 2 Charger Installation
Most Princeton garages already have a 200-amp panel, which means a Level 2 charger on a dedicated 60-amp circuit is usually a straightforward job. We hardwire the charger, run the conduit clean, and set you up to add roughly 25-30 miles of range per hour. For most of our Princeton customers, this is the one-day install that changes their whole week.

Tesla Wall Connector Installation
We install Tesla Wall Connectors on a regular basis throughout Princeton, and we stock the units and the 6/2 Romex so you’re not waiting on a parts order. Whether it’s a Model 3 in a garage off Beauchamp Drive or a Model Y in a subdivision near Princeton High School, we handle load calculations, breaker sizing, and the cleanest possible conduit run. In new tract homes with spray-foam attics, that last part matters more than people think.

Panel Upgrade for EV Charging
Your Princeton home probably came with a 200-amp panel, but that doesn’t mean it has room for a 60-amp charger on top of two AC condensers, a pool pump, and an electric oven. We run the actual load calculation off your real usage, not a brochure estimate. If you do need an upgrade, we’ll tell you straight, and we’ll quote it honestly. Most Princeton homes we see do not need one, and we won’t sell you one you don’t need.

Garage & Driveway Charger Wiring
HOA covenants in communities throughout the 75407 ZIP often require EV charger conduit and disconnect placement to be flush with finished walls and hidden from street view. That’s a Princeton-specific constraint you won’t hear about from a Fort Worth or Dallas outfit rolling through. We route wire through attics, set units on recessed side walls, and make sure nothing hangs where your management company will flag it.

Solar-Paired EV Charging
This is where we do our best work in Princeton. Pair a Tesla Wall Connector or a FranklinWH-backed system with your solar array, and your car charges off daytime production instead of pulling from the grid at Oncor’s peak rates. We work with Tesla, Enphase, and FranklinWH equipment, and we’ll wire the charger so it prioritizes solar when the sun’s up. Bring me a bill, I’ll bring you the math.
We also install Commercial EV Charging Stations for Princeton businesses along Highway 380 and the growing commercial corridors near the new schools. Same upfront pricing, same no-subcontractor policy.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Princeton
We install and service chargers from Tesla, Enphase, and FranklinWH, and we keep common parts and breakers in stock for fast turnaround in Princeton. If you already have a charger and it’s acting up, we’ll troubleshoot it. If you’re buying new, we’ll recommend what fits your panel, your solar array if you have one, and your HOA’s rules. No upselling. No brand loyalty that costs you money.
Common EV Charger Installation Problems We See in Princeton Homes
- HOA covenant violations on front-facing chargers. We’ve seen Princeton homeowners install a charger on a front-facing garage wall, then get a cease-and-desist from the management company. We know where your HOA wants the charger, and we plan the run before we drill the first hole.
- Nuisance tripping from undersized breakers. A 40-amp breaker might look fine on paper, but when both AC condensers kick on in July and the pool pump’s running, a Princeton garage circuit can trip every afternoon. We run the load calc first.
- Condensation and mold from unsealed spray-foam penetrations. Princeton’s new tract homes are almost all spray-foam insulated in the attic. Cut through that foam without sealing the penetration and you get condensation, then mold, inside a garage that’s barely a year old. We seal every penetration we make.
- Chargers wired without a load calc for solar-paired homes. A home with Enphase microinverters and an EV charger needs the charger wired to play nice with the solar system, especially if you’re waiting on Oncor interconnection. We set the priorities so you charge off the sun, not the grid.
Pricing for EV Charger Installation in Princeton, TX
Straight numbers for Princeton: a standard Level 2 charger install runs $450-$850 when the panel has headroom and the garage wall is accessible. A Tesla Wall Connector install typically runs $650-$1,150 including the unit. Adding a panel upgrade brings the job to $2,400-$4,500 depending on your existing service. Solar-paired EV charging with Enphase or FranklinWH integration starts around $1,200 for the charger side, more if we’re adding battery storage. Free estimates, no trip charge inside our own county, and a Senior and Veteran 10% discount that never expires. Call (877) 550-6892 and get the exact number for your garage.
We Also Serve Cities Near Princeton
Our Princeton team runs calls every week to Fairview, McKinney, Lucas, and Melissa. If you’re a few minutes outside the 75407 ZIP and need a charger installed, call us. We’ll be there.
Serving Princeton, TX - Our Local Coverage Area
We’re based in the Princeton area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - EV Charger Installation in Princeton
Yes, sometimes. Princeton’s fast growth means Oncor’s interconnection queue backs up during peak building seasons, and if your solar system is already permitted and pending interconnection, your charger can still be hardwired and used from the grid right away. We wire the charger so it switches to prioritizing solar production the moment Oncor gives your system permission to operate. Call (877) 550-6892 and we’ll walk you through exactly where your interconnection sits.
In nearly all cases, yes, as long as the charger, conduit, and disconnect are placed flush with finished walls and hidden from any street-facing angle. Princeton HOAs like the one in Trails at Riverstone and Arcadia Farms are strict about visible equipment. We plan the route, sometimes through attic spaces above spray-foam insulation, so everything passes covenant review the first time.
Usually no. Homes built in Princeton between 2015 and 2025 almost all have 200-amp panels, which generally leaves room for a 60-amp circuit. We run a real load calculation against your actual usage, not the nameplate numbers, and we’ll tell you if you truly need an upgrade. Most of the Princeton homes we see do not.
Princeton sits in Collin County’s hail corridor, so any charger mounted on an exterior wall needs a weather-rated enclosure and a hardwired connection, not a plug-in cord dangling in the elements. We use outdoor-rated units and weathertight conduit fittings on every Princeton exterior install. Hail won’t hurt a properly installed charger, but a cheap plug-in setup will fail.
Only if you have battery storage, and most Princeton homes do not yet. A solar array alone shuts off during an outage, which means your charger shuts off with it. Add a FranklinWH battery or similar storage and we can wire a critical-loads panel that keeps your charger, fridge, and a few lights running when Oncor’s grid goes down. That’s a bigger conversation, and it starts with one call: (877) 550-6892.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Princeton, TX since 2011.






Before
After
Before
After
Before
After