Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable EV Charger Installation Across Keller
If you need an EV charger installed in Keller, here’s the short version: We handle the permit, the panel work, the HOA-friendly conduit routing, and the city inspection. A typical Level 2 installation in Keller runs $650 to $1,450, and most Keller jobs are done in a single visit. We serve the 76244 and 76248 zip codes weekly, and we know Keller’s HOA landscape well enough to keep your charger off the architectural-review committee’s radar. Call (877) 550-6892 and we’ll give you a real number before we ever set foot on your property.
We’re Gus’s Solar. Gus Petrakis started this company in 2011, and his name is still on the truck. We’re not a door-knocking outfit that disappears after the paperwork clears. We’re a local shop that answers the phone with a live person, quotes you a real price, and sends background-checked, uniformed techs who actually know their way around Keller’s subdivisions. If you live in Hidden Lakes, Marshall Ridge, or the Villages of Woodland Springs, you’ve probably seen our trucks. We’ve been in and out of Keller garages long enough to know where the panels hide, how the HOAs think, and what inspectors in Tarrant County actually look for.
Why Gus’s Solar Is Keller’s Preferred EV Charger Installation Company
Keller isn’t Fort Worth. It isn’t Southlake, either. Keller has its own rhythm: big brick homes, active HOAs, three-car garages, and homeowners who’ve been burned before by out-of-state installers quoting one number on the phone and another at the door. That’s why our approach here is different. We show up on time, we wear uniforms, and the price we quote is the price you pay. No “change orders” halfway through the job. No salesman needing an answer tonight.
Over 29 years of combined experience in Tarrant County means we’ve seen every panel configuration, every garage layout, and every HOA architectural guideline Keller can throw at us. We know that homes in 76248 built after 2005 often have 200A service, but not always enough headroom for a 48A charger once the AC, pool pump, and two fridges are accounted for. We know that Keller’s brick-veneer exteriors make surface-mounted conduit look terrible and trigger ARB complaints. So we route through attics, behind downspouts, and along garage interior walls wherever possible. That’s local knowledge you can’t get from a national call center.
And here’s the thing: Gus Petrakis puts his name on every job, the same way he has since 2011. When something isn’t right, one call brings him back. That’s the 90-Day Done Right Promise, in writing, on every install. You won’t get that from a pop-up crew working out of a rental van.
Our EV Charger Installation Services in Keller
Level 2 Charger Installation
Most Keller homeowners choose a Level 2 charger, and for good reason. A 240V circuit charges your EV overnight instead of over a weekend, which matters when your commute takes you down 377 to I-35 every morning. We install Level 2 chargers in garages, carports, and driveway-adjacent exterior walls. A typical Level 2 install in Keller runs $650 to $1,150, including the breaker, wiring, and a NEMA 14-50 outlet or hardwired connection. If your panel is in the garage, the job is straightforward. If it’s on the far side of the house, we’ll route conduit through the attic or behind a downspout so your HOA never flags it.
Tesla Wall Connector Installation
The Tesla Wall Connector is the most common charger we install in Keller, especially in Hidden Lakes and Marshall Ridge where Teslas are everywhere. The Wall Connector pulls up to 48A, which means a full charge overnight even for a Model S Long Range. Installation in Keller typically runs $850 to $1,450, depending on the panel location and whether we need to add a subpanel. We’re factory-trained on Tesla Wall Connectors and we stock the mounting components locally, so you’re not waiting on parts from California.
Panel Upgrade for EV Charging
This is where Keller’s housing stock creates real problems. Many homes in 76244 and 76248 built in the late 1990s and early 2000s came with 100A or 125A panels. Add a 48A EV charger to that panel in August, when the AC is running full tilt, and you’re going to trip the main breaker at the worst possible moment. We perform a proper load calculation before we ever recommend a charger size. When the math says upgrade, we install a 200A or 300A panel, usually for $2,800 to $4,200 in Keller. It’s not the cheapest line item, but it’s the difference between charging reliably and standing in a dark garage at 11 p.m. resetting breakers.
Garage & Driveway Charger Wiring
Three-car garages are the norm in Keller, but the breaker panel is rarely on a convenient wall. We’ve installed chargers in garages where the panel sits 40 feet away on the opposite exterior wall, and we’ve run 6/2 wire through attics above finished garages, through crawl spaces, and along the back side of brick walls where no one ever sees it. Exterior driveway installations require weatherproof enclosures and GFCI protection. Given North Texas hail and wind-driven rain, we recommend hardwired installations over plug-in NEMA outlets for anything exposed to the elements. Hardwired units have no plug to corrode and no outlet face for water to find.
Solar-Paired EV Charging
If you’re driving an EV in Keller, you’re buying electricity at whatever rate your retail electric provider charges. If you also have solar panels on that big brick roof, your EV fuel can cost you almost nothing. We design solar-paired EV systems that size your array to cover your household load plus your charging habits. In Keller’s deregulated market under Oncor’s wires, the buyback rate on your exported solar power depends entirely on which REP you choose. We walk you through that selection before we finalize system size, because the same array can have a six-year or a twelve-year payback depending on one choice you make on a website. That’s the kind of thing installers in Austin never had to learn, because their utility was regulated. We live it here every day.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Keller
We install and service chargers from Tesla, ChargePoint, Enphase, Emporia, and Wallbox. We also integrate chargers with solar and battery systems from Tesla, Enphase, SolarEdge, and FranklinWH, so your EV can pull from your panels instead of the grid whenever possible. Because we stock common mounting hardware, breakers, and wiring locally in the DFW metro, we rarely wait on parts. If you already have a charger that isn’t working right, we service those too. Bring us the model number and we’ll tell you over the phone whether it’s worth fixing or replacing. Call (877) 550-6892 and we’ll sort it out.
Common EV Charger Installation Problems We See in Keller Homes
- HOA violation notices for visible conduit. Keller’s HOAs are among the most active in Tarrant County, and visible utility modifications on brick exteriors are a frequent target. We’ve seen ARB letters demanding removal of surface-run conduit within 30 days. Our fix is to route conduit through attics, inside garage walls, or behind existing downspouts so there’s nothing for the committee to photograph.
- Main breaker trips during AC season. Homes in 76244 and 76248 built between 1993 and 2015 often have panels that are fine for 2005-era loads but marginal for a 48A charger plus two AC units plus electric pool equipment. We do a real load calculation before installation. If the panel can’t handle it, we tell you before we sell you a charger.
- Corroded NEMA 14-50 outlets on driveway-adjacent walls. North Texas hail-driven rain finds its way into exterior outlets, and GFCI breakers trip constantly. For any outlet exposed to weather, we recommend a hardwired charger in a weatherproof enclosure. It’s a hundred bucks more and it won’t leave you standing in the rain with a dead EV and a tripped breaker.
- Undersized wiring from DIY or handyman installs. We’ve seen 14-gauge wire feeding a 48A charger, which is a fire waiting to happen. EV chargers pull continuous load for hours. The wire, the breaker, and the connections have to be rated for it. If you have an existing install you’re not sure about, call us. We’d rather inspect it for free than read about a garage fire in Keller.
Pricing for EV Charger Installation in Keller, TX
Here are real numbers for Keller, not brochure ranges from a national website:
- Level 2 charger installation with panel in garage: $650-$950
- Tesla Wall Connector installation with panel in garage: $850-$1,200
- Installation with long conduit run (40+ feet, attic or crawl space): $1,100-$1,450
- Panel upgrade from 100A to 200A: $2,800-$3,800
- Panel upgrade from 125A to 300A: $3,800-$4,600
- Weatherproof exterior hardwired charger installation: $900-$1,350
What moves the number in Keller? Distance from panel to charger, whether we’re going through an attic or along an exterior wall, and whether your panel needs an upgrade. HOA compliance routing usually adds $100 to $200 in labor, and it’s money well spent. We give free estimates, we never charge a trip fee inside our own county, and we offer a Senior and Veteran 10% discount that never expires. Call (877) 550-6892 for an exact quote. Bring me a bill, I’ll bring you the math.
We Also Serve Cities Near Keller
Our Keller crews also cover Watauga, North Richland Hills, Roanoke, and Saginaw. If you’re a few miles outside Keller, we’re happy to help. And if you want to see how we approach solar and storage specifically for Keller homeowners, take a look at our Keller city page. For the full service breakdown, our EV Charger Installation hub explains what every job includes.
Serving Keller, TX - Our Local Coverage Area
We’re based in the Keller area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - EV Charger Installation in Keller
Most Keller HOAs will not approve visible conduit or surface-mounted equipment on street-facing brick. The architectural review committees in Hidden Lakes, Marshall Ridge, and the Villages of Woodland Springs routinely reject any ‘visible utility modification.’ The practical answer is to hide it. We route conduit through attics, inside garage walls, or behind downspouts so there’s nothing visible from the street. If your charger must be exterior-mounted, we use paintable enclosures and position them behind shrubbery or on the least-visible wall. Call (877) 550-6892 and we’ll walk you through what your specific HOA is likely to accept.
Usually, but not always. A 200A panel in a 2005 Hidden Lakes home typically has existing loads from two AC units (approximately 60-80A combined when running), an electric dryer, a range, and general lighting and receptacle circuits. Adding a 48A continuous load from a Tesla Wall Connector can push total demand past 160A under peak summer conditions. A load calculation tells you for sure. We run that calculation before we recommend anything. If the panel comes up short, we’ll show you the math and discuss options, which may include running the charger at a lower amperage or upgrading the panel. Call (877) 550-6892 for a free assessment.
Yes, but it takes some engineering. Under Texas Property Code, your HOA cannot ban solar panels outright, but they can restrict panels visible from the street. Keller’s hipped, multi-faceted rooflines mean the best south-facing plane is often the one facing the street. We design rear-slope and split-array systems that put panels on the back of the roof or on less-visible planes, even if that means slightly lower output. We also size the system to cover your charging load so your EV fuel comes from your roof instead of the grid. The buyback rate for any excess you export depends on your retail electric provider, and we’ll help you pick one that actually pays you fairly. Call (877) 550-6892 and bring us your utility bill. We’ll show you the year-25 numbers, not the day-one brochure figure.
None, if we do it right. When the panel sits on the opposite wall from the garage, we route the wire through the attic above the garage and drop down inside the wall cavity to the charger location. That’s standard practice for our Keller jobs. The only time we run exterior conduit is when there’s no attic access or when an interior route would require cutting through finished ceilings. Even then, we route along the rear of the house and paint the conduit to match the brick. Expect the attic route to add $150 to $250 in labor compared to a panel-in-garage install. It’s the cleanest solution and your HOA will never see it.
In Keller’s deregulated market, the buyback rate for exported solar power depends entirely on the retail electric provider you choose. Some REPs pay a flat avoided-cost rate around $0.03-$0.05 per kWh. Others offer 1:1 buyback plans that credit you the full retail rate for every kWh you export. A few offer time-of-use plans that pay more for solar exported during summer peak hours, which is exactly when Keller’s 100°F days suppress panel output. The right choice depends on your usage pattern and array size. We walk every Keller solar-paired EV customer through REP selection before we finalize system size, because the same array can have dramatically different payback periods depending on that one choice. Call (877) 550-6892 and bring your last 12 months of bills. We’ll run the numbers.
Written by Gus Petrakis, Owner at Gus’s Solar. Serving Keller, Texas with EV charger installation, solar, and battery storage since 2011.