Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Commercial Solar Installation Across Hurst
Commercial solar installation in Hurst runs roughly $2.35 to $3.10 per watt before incentives, which puts a typical 100 kW warehouse array between $235,000 and $310,000, while a 25 kW retail rooftop system lands closer to $58,000 to $77,000. Most Hurst commercial jobs start with something the national outfits never mention: a service panel upgrade from 100-amp to 200-amp, because Oncor won’t approve interconnection on the original Federal Pacific and Zinsco panels still sitting in so many mid-century buildings here. We know this because we’ve done it on Pipeline Road, on Harwood, on precincts all through the 76053 and 76054 zips. If you want a real number for your building, call (877) 550-6892 and bring us a bill. We’ll bring you the math.
Gus Petrakis has been putting his own name on solar work since 2011, and he doesn’t hand your job to a sub. His crew does the install, flashes every penetration properly, and stands behind it with the 90-Day Done Right Promise in writing. For commercial work in Hurst, that means you get a published address, a license number, and an owner who answers his own phone at 3 a.m. if a storm tears through Tarrant County.
Why Gus’s Solar Is Hurst’s Preferred Commercial Solar Installation Company
We’re not a pop-up sales crew working a territory. We’re a local shop that has spent years crawling through Hurst attics and onto Hurst roofs, and that matters when your building was framed in 1968 and still has the original service panel the builder put in. The Hurst commercial buildings we serve along Pipeline Road, Harwood Road, and the streets off Precinct Line Road share a construction vintage that national installers misread constantly. They quote an array and disappear. We quote the array, the panel swap, the hail rating, and the interconnection timeline because we know Oncor’s requirements and we know what a Tarrant County spring storm does to a low-pitch roof.
Every commercial job we do in Hurst carries the L.O.C.A.L. standard we operate by: Local roots, On time, Community first, Accountable, Loyal. It’s not a slogan on a truck magnet. It’s why a live person answers our phone 24/7, why our technicians are background-checked and uniformed, and why we tell every customer the same thing: take two weeks. Think about it. The price will be the same.
Our Commercial Solar Installation Services in Hurst
Commercial Rooftop Solar
Most Hurst commercial solar starts on the roof, and most Hurst roofs are low-pitch gable or hip designs from the 1960s through 1980s. That limits usable south-facing square footage, which means we have to be honest about what a roof can actually produce before we quote anything. Gus quotes the year-25 output, not the day-one brochure number. If your roof can’t carry enough panels for a meaningful kWh offset, we’ll tell you that in the first meeting, not after you’ve signed.
Warehouse & Industrial Solar
Warehouse work in Hurst often means large, flat or low-slope membrane roofs over buildings that predate modern energy codes. The arrays pencil out well because demand charges are eating your operating budget, but the panel-upgrade prerequisite applies here more than anywhere. We’ve done enough industrial work near the Pipeline Road corridor to know that a 1970s warehouse with 15,000 square feet of roof usually needs the service panel addressed before a single panel goes up.
Solar Carport Installation
For Hurst commercial properties where the rooftop can’t carry the array, a solar carport is often the better answer. Carports give us the south-facing azimuth we need and turn a parking lot into a generating asset. They also dodge the hail question differently: panels on a carport frame sit at a steeper angle than a low-pitch roof, which reduces hail impact severity and gives us more flexibility on panel selection. For a retail center or office park in Hurst with limited roof space, this is frequently the smarter build.
Commercial Battery Storage
We pair commercial arrays in Hurst with FranklinWH and Tesla battery systems because Oncor territory has demand-response programs and time-of-use structures that make storage pay. A battery bank sized to your load profile means you stop buying power at peak rates and keep operating through the outages that Tarrant County’s storm seasons bring. We spec the storage after we see your actual interval data, not from a generic usage table.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
Our Hurst commercial work runs on equipment we trust because we’ve watched it hold up through Tarrant County hail seasons. We install Enphase microinverters for rapid shutdown compliance on commercial rooftops, SolarEdge for larger string designs where the layout supports it, and Tesla or FranklinWH for storage. We stock common components locally, which means a failed inverter on a Hurst building doesn’t wait on a truck from Phoenix. If you already have a system from another installer and it’s underperforming, we service that too, and we give you a straight answer about whether it’s worth repairing or replacing.
Common Commercial Solar Installation Problems We See in Hurst Buildings
- Original 100-amp Federal Pacific or Zinsco panels failing interconnection. This is the single most common project-stopper in Hurst’s commercial stock. Oncor will not approve a solar array tied to a panel with known fire-risk history, which forces a 200-amp service upgrade mid-project if it wasn’t scoped upfront. We scope it upfront, because we know the housing vintage here.
- Low-pitch hip and gable roofs leaving too little south-facing azimuth. Buildings framed between 1965 and 1980 in Hurst were not designed with solar in mind. The roof geometry often caps the array size below what the business actually needs, unless we add a carport or ground-mount. We calculate this before quoting so you’re not surprised at year 3.
- Hail damage on panels without IEC 61215 impact ratings. Tarrant County’s spring storm cells produce golf-ball hail with regularity, and a commercial panel that fails a hail strike often triggers a warranty denial if it wasn’t impact-rated. For Hurst specifically, we won’t spec a panel that lacks IEC 61215. It’s non-negotiable here, not optional.
- Entire cul-de-sacs sharing the same obsolete panel type. Because so much of Hurst was subdivided and built within a tight 15-year window, we find whole commercial blocks and adjacent properties with the same original 100-amp Federal Pacific or Zinsco panels. One commercial solar job often leads to a cluster of neighboring businesses needing the same two-scope upgrade before their own arrays can move forward.
Pricing for Commercial Solar Installation in Hurst, TX
Commercial solar in Hurst runs $2.35 to $3.10 per watt, installed and permitted. A 50 kW rooftop system typically lands between $117,000 and $155,000. A 200 kW warehouse array runs $470,000 to $620,000. Add a service panel upgrade from 100-amp to 200-amp and you’re looking at $4,000 to $8,000 more, depending on what’s behind the meter and whether Oncor requires any line-side changes. Carport installations add $0.75 to $1.25 per watt over rooftop because of the steel structure and foundation work. Battery storage runs $800 to $1,200 per kWh of usable capacity installed, so a 30 kWh FranklinWH bank lands between $24,000 and $36,000. These are Hurst numbers, not Dallas brochure figures. For an exact quote on your building, call (877) 550-6892. Estimates are free and the price we quote is the price you pay.
Here’s the key takeaway for Hurst: a commercial solar quote that doesn’t mention your existing panel is a quote that isn’t finished. We’ve seen too many Hurst businesses get a rosy number from an out-of-state outfit, only to discover the panel upgrade and the hail-rated array requirement after they’ve already spent money on engineering. If a salesman needs an answer tonight, the answer is no. Take two weeks. The price will be the same.
We Also Serve Cities Near Hurst
Our crew works throughout the Mid-Cities, and we regularly send a team to Bedford, Richland Hills, North Richland Hills, and Colleyville for commercial solar work. If your building sits in one of those cities, the same Commercial Solar Installation team that handles Hurst jobs will be the one on your roof. You’ll get the same upfront pricing, the same hail-rated specs, and the same owner answering the phone.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Commercial Solar Installation in Hurst
Because Hurst’s commercial buildings were mostly built between 1960 and 1985, and the original 100-amp Federal Pacific or Zinsco panels from that era do not meet Oncor’s interconnection requirements. Oncor will not approve a solar array on a service panel with known safety issues, so the panel swap to 200-amp service has to happen first. In Hurst, this is the local norm, not an upsell. We scope it into the first quote so there are no mid-project surprises. Call (877) 550-6892 and we’ll tell you what your building needs before you spend a dollar.
Yes. Hurst sits in Tarrant County’s hail-active corridor, where spring and early-summer storm cells regularly produce golf-ball-sized hail. Panels without IEC 61215 impact ratings get cracked, and the warranty often won’t cover it. Dallas and Fort Worth see hail too, but Hurst’s position in the Mid-Cities corridor means the frequency and severity are consistent enough that we treat impact ratings as a hard requirement on every commercial quote. It’s not a line item we negotiate away.
Sometimes, but not always. Low-pitch hip and gable roofs limit south-facing azimuth, which caps how many panels fit and how much energy they capture. We calculate the real number off your actual utility bill and the roof’s usable square footage before we quote. If the rooftop can’t carry enough, we look at a solar carport or a ground-mount, which often gets you the full offset the roof couldn’t deliver. For a straight answer on your specific building, call (877) 550-6892.
Oncor’s commercial net metering structure credits excess generation at a rate that’s lower than the retail rate, which means your payback math depends heavily on how much of your solar you consume on-site. Businesses that run daytime loads, like warehouses, retail, and light manufacturing, see faster payback because they’re offsetting peak-rate demand charges directly. We build your quote off your actual interval data, not a generic assumption, so the year-25 output number we give you reflects how your building actually uses power.
No. Oncor will not approve interconnection on a Federal Pacific or Zinsco panel, full stop. These panels have documented safety failures and are a fire risk even without solar added. The panel upgrade to 200-amp service has to happen first, and we handle it as part of the same project scope. It adds $4,000 to $8,000 to the total, and it’s not optional. We’ll tell you this in the first conversation, not after you’ve signed.
Ready to Talk About Commercial Solar in Hurst?
Bring me a bill, I’ll bring you the math. That’s how Gus has run Commercial Solar Installation in Hurst since day one, and it’s how we still do it for every warehouse, retail center, office park, and industrial building in the 76053 and 76054 zips. We’ll quote the panel upgrade if you need it, spec hail-rated panels because you’re in Tarrant County, and give you a number that won’t change when the contract lands on your desk. Call (877) 550-6892 for a free estimate. If a salesman needs an answer tonight, the answer is no. If you want a straight answer, you’ll get one from us.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Hurst since 2011.