Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Solar Panel Installation Across Clovis
Solar panel installation in Clovis runs between $14,500 and $22,000 for a typical 6-8 kW rooftop system after the federal tax credit, and most jobs take two to three days from first panel to final PG&E approval. We’ve been doing this work in Clovis long enough to know the neighborhoods, the tile roofs, the PG&E interconnection quirks, and the difference between a quote that holds up and one that evaporates after the contract is signed. If you’re in Clovis and want a real number tied to your actual utility bill, call Gus’s Solar at (877) 550-6892. We’ll walk your roof, read your bill, and give you a price that won’t change next week.
Why Gus’s Solar Is Clovis’s Preferred Solar Panel Installation Company
Gus Petrakis puts his name on the truck, answers his own phone, and has been running Gus’s Solar as a locally owned shop for over 29 years. Clovis homeowners call us because the person who quotes the job is the same person who shows up to check the work. No call center. No out-of-state sales crew that disappears after the paperwork clears. When a Clovis customer calls with a question about their array three years after install, Gus is still the one picking up.
Our customers in Clovis have left us a strong local reputation, and we encourage you to ask around. Drive through Harlan Ranch, Buchanan Estates, or the neighborhoods off Temperance and you’ll see our work on roofs throughout the area. When a Clovis homeowner calls, we schedule a site visit fast – usually within 48 hours – and we’re familiar with Clovis’s mix of newer track-home construction north of Herndon and older ranch-style homes closer to Old Town. Every job is backed by the 90-Day Done Right Promise: if it’s not right, Gus comes back and makes it right. In writing, on every contract.
Our Solar Panel Installation Services in Clovis
Rooftop Solar Installation
Most Clovis homes we install on are concrete tile or composition shingle, and the mounting approach matters. Tile roofs need proper flashing at every penetration, not just caulk and hope. Gus’s own crew does the install – background-checked, uniformed, and trained on tile-specific racking so we don’t crack tiles or leave a leak behind. A typical rooftop job in Clovis takes two days of panel work and one more for electrical and commissioning.
Solar System Design & Permitting
Design work here means more than plugging numbers into software. Clovis sits in PG&E territory with a monthly true-up, not the annual true-up system used by neighboring utilities. That changes how we size arrays for Clovis homes. We design to your actual monthly kilowatt-hour offset – reading 12 months of your real usage, not a brochure average – then pull permits through the City of Clovis and submit the PG&E interconnection application. The city’s plan check usually turns around in 10 to 14 business days, and we handle every page.
Solar Panel Replacement
If a panel fails in Clovis, you don’t want to wait for a national outfit to route a ticket through three levels of support. We stock common replacement panels and microinverters locally and can usually swap a failed panel within a week. Clovis’s hard water and sprinkler overspray cause premature corrosion on rooftop DC connectors – we see this on tile roofs especially – and we’ll diagnose whether the panel itself is dead or the connector is the problem before recommending replacement.
Roof-Mount & Tile Roof Solar
Tile roofs are the single biggest variable on Clovis solar jobs. Spanish tile and flat profile concrete tile both require different mounting hardware, and we’ve seen too many installs where the array sits too low to the roof deck and catches overspray from lawn sprinklers. We use raised racking where it’s needed, flash every penetration with proper tile hooks and lead flashing, and test every connection before we leave. If you have a tile roof in Clovis, call (877) 550-6892 and we’ll tell you exactly what your roof needs.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Clovis
We work with the equipment Clovis homeowners actually want: Enphase microinverters, Tesla Powerwall, SolarEdge inverters, and FranklinWH batteries, plus panels from SunPower, Qcells, REC, and Panasonic. Because we service what we install, we stock local parts for Clovis customers – microinverters, MC4 connectors, rapid shutdown modules – so a warranty replacement doesn’t mean waiting on a slow freight shipment. One call brings Gus back, and he’ll bring the right part with him.
Common Solar Panel Installation Problems We See in Clovis Homes
- High first month’s PG&E bill after install. Clovis’s monthly true-up means an undersized array shows up as a surprise bill within 30 days, not at year-end like annual true-up territories. We get more “why is my bill still high” calls from Clovis than anywhere else we work, and the fix is usually re-sizing the array or fixing an interconnection delay that left panels producing but not exporting.
- Corroded MC4 connectors from sprinkler overspray. Clovis’s hard water leaves mineral deposits, and when lawn sprinklers hit a low-slung array on a tile roof, the connectors corrode and eventually fault. We see this regularly in neighborhoods with heavy landscaping – Harlan Ranch and the older subdivisions along Willow Avenue especially. The fix is a connector replacement and rerouting or raising the array edge.
- Rapid shutdown faults after summer brown-outs. When Clovis gets a heat wave and PG&E’s voltage dips, older inverters log a rapid shutdown fault and won’t re-sync after power comes back. You see a blinking light on the inverter and zero production until someone resets it. Newer Enphase and SolarEdge systems handle this better, but if your array is five or more years old, you may need a firmware update or a replacement inverter.
- Tile roof leaks from sloppy flashing jobs. We’ve repaired installs from other companies where the flashing wasn’t done properly and water found its way under the tile. Clovis gets about 12 inches of rain a year – not a lot, but enough to find bad flashing. If you had solar installed by someone else and now see water stains in the ceiling, call us. We’ll come out and find the penetration that wasn’t sealed.
Pricing for Solar Panel Installation in Clovis, CA
We Also Serve Cities Near Clovis
While this page focuses on Clovis, our crews also work in Fresno, Old Fig Garden, Sanger, and Fowler. If you’re in one of those areas and need solar panel installation or a repair, the same crew, same pricing, and same 90-Day Done Right Promise apply. Our Solar Panel Installation team handles the full county, not just the city limits.
Serving Clovis, CA - Our Local Coverage Area
We’re based in the Clovis area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Installation in Clovis
Why do Clovis homeowners sometimes see a high PG&E bill in the first month after solar installation?
A high first-month bill in Clovis usually means the interconnection is still pending and your panels are producing power that isn’t being exported to PG&E yet. Clovis’s monthly true-up means any gap between when panels go live and when PG&E approves the interconnection shows up immediately on your next bill. We monitor every Clovis install until the utility confirms the meter is reading export, and we’ll call PG&E on your behalf if the approval drags. If your bill is still high 30 days later, call us at (877) 550-6892 and we’ll pull the production data to find out why.
Do I need a rapid shutdown system for a rooftop solar installation in Clovis?
Yes – California code requires rapid shutdown on all new rooftop solar installs, and Clovis enforces this through the city’s plan check. The good news is modern Enphase microinverters and SolarEdge power optimizers have rapid shutdown built in, so you don’t need extra hardware. If you have an older system in Clovis that predates the current code, you may need a module-level shutdown add-on, especially if you’re adding panels or replacing an inverter. We’ll tell you exactly what your system needs during the site visit.
How does the azimuth of my roof affect solar production in Clovis?
South-facing roofs produce the most total energy in Clovis, but west-facing roofs produce more during PG&E’s peak rate window from 4 to 9 p.m., which matters more under the current net metering rules. We run production models for every Clovis roof orientation before we quote, and sometimes a smaller west-facing array on a Clovis home beats a bigger north-facing one because of when the power is generated. Bring us your address and we’ll show you the numbers for your actual roof, not a generic table.
How long does PG&E take to approve interconnection for a new solar system in Clovis?
PG&E typically takes two to four weeks to approve interconnection for a new Clovis solar system after the application is submitted. The city’s plan check happens first and usually takes 10 to 14 business days. We submit the utility application the same day the city permit is pulled, and we’ve learned exactly how to format the paperwork so PG&E doesn’t bounce it back for corrections. The fastest way to delay your Clovis install is an incomplete application – we know that because we’ve fixed enough of them for people who started with another company.
Can you reinstall my existing panels if I need a new roof in Clovis?
Yes, and this is one of the most common calls we get from Clovis homeowners with tile or composition roofs hitting the 20-year mark. We remove the full array, store your panels and inverters safely, and reinstall everything after your roofer finishes – including re-flashing every penetration and re-testing the system. Solar panel removal and reinstall for a typical Clovis home runs $1,800 to $3,200. Schedule it before you book the roofer so we can coordinate the timeline and you’re not without power production any longer than necessary.
Contact Gus’s Solar for Solar Panel Installation in Clovis
If you’re in Clovis and want a straight answer about solar – what it costs, what your roof can handle, and whether it’s worth it on your actual PG&E bill – call (877) 550-6892. A live person answers, 24/7. No voicemail. No ticket queue. Bring us a bill and we’ll bring you the math. Take two weeks to think about it. The price will be the same when you call back. That’s how we’ve done business in Clovis for over 29 years, and that’s how we’ll do business on your roof.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Clovis and the surrounding Central Valley since 2011.