Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Solar Panel Cleaning Across Murphy
Solar panel cleaning in Murphy typically runs $150-$350 for a standard residential array, and most jobs are completed within two hours. That’s the number to keep in mind. Murphy’s HOA-governed subdivisions mean panels often sit on shaded rear roof planes where soiling hits production harder than it would on a wide-open south face. Gus’s Solar has been cleaning panels across Collin County for over a decade, and we know exactly what the combination of hail-season dust, construction residue, and HOA placement rules does to a system’s output. Call (877) 550-6892 and we’ll give you a straight quote, no pressure, no signature needed tonight.
Why Gus’s Solar Is Murphy’s Preferred Solar Panel Cleaning Company
Gus Petrakis puts his own name on the truck, and the crew you see on your Murphy roof is the same crew that will come back when you call. We’re not a rotating cast of subcontractors. Homeowners along Betsy Lane, in Maxwell Creek, and across the 75094 zip code have had us out for everything from post-hail inspections to annual scheduled cleanings, and the reviews all point to the same thing: we show up when we say we will, and the work gets done right the first time.
Response time to Murphy is same-day for emergencies and within two business days for scheduled cleanings. Because we dispatch from our Dallas-Fort Worth office and keep crews staged throughout Collin County, a Murphy call doesn’t mean waiting for someone to drive across the metroplex. We know the subdivision layouts here, we know which HOAs push panels to the rear roof, and we know what to look for before we even climb the ladder.
Every cleaning is backed by our 90-Day Done Right Promise. If it’s not done right, Gus makes it right, in writing. That’s not a brochure line. That’s how we’ve operated since 2011.
Our Solar Panel Cleaning Services in Murphy
Residential Panel Cleaning
Most Murphy homes have panels mounted on complex hip roofs with multiple angles, and we clean every plane, not just the ones visible from the driveway. A standard two-story brick veneer home with a 20-30 panel system takes about two hours. We use filtered, deionized water so you’re not left with mineral streaking on glass facing the street, which matters a lot in HOAs that already scrutinize panel visibility.
Commercial Array Cleaning
Murphy’s commercial properties, from the retail clusters along FM 544 to the office buildings near the city complex, deal with dust accumulation from high traffic and nearby construction. We schedule commercial cleanings during off-hours so you’re not losing production during peak sun. Gus’s Solar works with the same care on a 200-panel commercial array as we do on a 16-panel home system.
Bird & Critter Guard Installation
Pigeons and grackles find Murphy’s residential panels especially appealing because hip-roof installations create shaded cavities under the panels. We install perimeter mesh guards that keep birds out without blocking airflow, and we’ve done enough of these on Murphy’s two-story tract homes to know exactly how to secure them against Collin County wind gusts.
Debris & Soiling Removal
This is the service Murphy homeowners need most after a storm. Hail, wind-blown leaves, and pollen season all leave residue that bakes onto the glass. We remove caked-on pollen, dirt, and organic film without abrasive scrubbing, then remap production so you can see the recovery in actual kWh output rather than just trusting a visual clean.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Murphy
We clean and maintain panels from Tesla, Enphase, SolarEdge, SunPower, and every major brand installed on Murphy roofs. If you have Enphase microinverters or a Tesla Powerwall tied into the system, we understand how soiling on one panel affects the entire string’s reporting. That matters when you’re trying to figure out whether a production dip is dirt or something more serious. We don’t stock parts for every brand on the truck, but we can source most components within a day, which keeps Murphy turnaround times short.
Common Solar Panel Cleaning Problems We See in Murphy Homes
- Post-hail debris trapped on complex hip roofs. Murphy sits in Collin County’s hail corridor, and after a storm, cracked or shifted panels can trap leaves and dirt that accelerate soiling losses on the shaded rear arrays HOA rules force most homeowners to use. We inspect for micro-cracks and panel shift before cleaning so you know whether you’re looking at a cleaning issue or a replacement issue.
- Mineral streaks from hard water on street-facing panels. Murphy has hard water, and when panels face the street, hard-water cleaning leaves streaks that reduce light transmittance and draw HOA complaints. We use deionized water specifically to avoid this.
- Uneven cleaning frequency across front and rear arrays. Many crews apply the same cleaning schedule to a shaded northeast panel face and a sunny southwest face, which wastes money. The shaded rear array in a Murphy HOA-constrained setup needs more frequent cleaning to recover the same production percentage.
- Construction dust from newer subdivisions. Murphy has grown significantly over the past two decades, and homes near active build sites or recent renovations deal with cement dust and sheetrock residue settling on panels. This film is finer than regular dirt and requires a more thorough rinse cycle to remove fully.
Pricing for Solar Panel Cleaning in Murphy, TX
A standard residential cleaning in Murphy runs $150-$350 depending on panel count, roof steepness, and whether you have a two-story or single-story home. Most single-story systems fall in the $150-$220 range. Two-story hip-roof systems with 20-30 panels typically run $250-$350 because they require more ladder work and safety gear. Bird and critter guard installation adds $8-$12 per linear foot, and a full perimeter guard on a typical Murphy home runs $400-$700. Scheduled cleaning plans drop the per-visit cost by 15-20%. We charge what we quote. No add-ons at the door. Call (877) 550-6892 for an exact price on your system, and remember: estimates are free, and we’re not going to ask for a signature tonight.
We Also Serve Cities Near Murphy
Gus’s Solar handles Solar Panel Cleaning throughout Collin County and the surrounding area. Beyond Murphy, our crews regularly serve Sachse, Wylie, Lucas, and Plano. If you’re in one of those cities and need a straight answer on panel cleaning, call the same number: (877) 550-6892.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Cleaning in Murphy
In Murphy, HOA rules almost always push panels to rear or side roof planes that are out of street view, and those placements tend to be more shaded and more prone to soiling accumulation. Panels on a shaded rear plane lose production faster from dirt than panels on an open south face, so you’ll likely need cleaning every six to nine months instead of once a year. A quick rule: if your rear array is noticeably duller than the panels you can see from the driveway, it’s time. Call (877) 550-6892 and we’ll tell you whether a cleaning will actually move your production numbers.
After hail, check for visible cracks, glass pitting, and any shifted or loose panels before scheduling a cleaning. Cleaning a cracked panel can push water into the module and create a bigger problem. If you see damage, call us and we’ll do a combined inspection and cleaning: we assess panel integrity first, flag anything that needs replacement, then clean the undamaged panels so you’re not losing production while you wait. Our Post-Storm Panel Cleaning service in Murphy includes this inspection at no extra charge.
Yes. In Murphy, your production feeds directly into your net metering calculation, and a soiled array can be losing 5-15% of its output without you realizing it. For HOA-constrained systems on shaded rear roofs, that percentage is often higher. Cleaning restores the output that goes back to the grid, which directly improves your true-up statement. We remap production after cleaning so you can see the before-and-after difference in real kWh, not just our word for it.
No. Cleaning, inspection, and maintenance work on an existing, already-approved solar installation does not require a new HOA architectural review in Murphy. The HOA approval applied to the original panel placement. You don’t need to notify anyone. Our crews wear uniformed shirts and carry identification, so if a neighbor or HOA board member asks, it’s clear we’re a licensed service provider, not a fly-by-night crew.
Front-facing panels in Murphy catch more street dust, brake dust from passing traffic, and construction residue because they face the road and the prevailing wind pattern. They also tend to be the panels your HOA allowed only if they’re minimally visible, which often means they’re mounted at a lower tilt on a street-facing slope, giving dirt fewer angles to wash off from. The back array looks cleaner because it’s sheltered from road traffic and usually mounted at a steeper tilt. We don’t clean both at the same frequency: we assess each array’s soiling rate independently and recommend accordingly.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Murphy and Collin County since 2011.