Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Fast, Reliable Solar Panel Cleaning Across Granbury
Solar panel cleaning in Granbury typically costs $180 to $340 for a standard residential array, and most jobs are finished the same day we arrive. If your panels sit anywhere near Lake Granbury’s eastern shoreline, you’re fighting a losing battle against algae, pollen, and grackle droppings that bake into a crust under the Texas sun. Gus’s Solar has been cleaning arrays across Hood County long enough to know exactly what that crust does to your production numbers, and we show up with the right water, the right brushes, and a straight answer about whether cleaning will actually pay for itself. Call (877) 550-6892 and we’ll tell you over the phone what you’re looking at.
Why Gus’s Solar Is Granbury’s Preferred Solar Panel Cleaning Company
Gus Petrakis put his own name on this company in 2011, and it’s the same name you’ll see on the truck that pulls up in 76048 or 76049. That matters in Granbury, where a lot of folks have already been through the wringer with out-of-state installers who vanished after the paperwork cleared. We answer our own phone, we send our own background-checked crew, and we don’t hand your roof off to a subcontractor we’ve never met.
Granbury homeowners call us because we’re here. Not a call center in another time zone. When a February ice storm leaves grit sheeted across your array and your Enphase app shows production flatlined, you want someone who knows what Acton Highway looks like after a freeze, not someone reading from a script. Our Solar Panel Cleaning team keeps service windows tight for Granbury jobs because we schedule from our Dallas-Fort Worth office and send crews directly to Hood County. One call brings Gus back if anything isn’t done right, and that’s in writing.
Our Solar Panel Cleaning Services in Granbury
Residential Panel Cleaning
Most Granbury homes have arrays between 20 and 40 panels, and we clean them top to bottom with filtered water and soft brushes rated for anti-reflective coatings. The job takes about two hours, and we walk the whole array twice: once to clean, once to inspect rails, clamps, and wiring for corrosion or critter damage. In the 76048 lake neighborhoods especially, we check every panel edge for the green film that rolls off Lake Granbury in the spring.

Post-Storm Panel Cleaning
After a Gulf-driven ice event like February 2021, Granbury panels are covered in a frozen grit that most homeowners don’t notice until their next utility bill arrives. The problem: that grit scratches the anti-reflective coating if it’s scrubbed dry or hit with tap water. Our post-storm service uses deionized water and low-pressure rinsing to lift the grit off without etching the glass. We schedule these jobs within days of a major storm, because waiting means the grit bakes on during the next hot week.

Bird & Critter Guard Installation
Grackles love the trees along Lake Granbury’s shoreline, and grackles love roof edges. Their droppings are acidic enough to etch panel glass and create permanent hot spots that even the best microinverters can’t correct. We install wire mesh guards around the array perimeter and under the panel edges to keep birds out without trapping heat or blocking airflow. For shoreline homes in 76048 where flocks congregate year-round, this is the single best thing you can do to protect your production curve.

Debris & Soiling Removal
Oak pollen, cottonwood fluff, and lake algae form a damp biofilm on Granbury panels in the spring. By July, triple-digit heat bakes that film into a hard crust that blocks light in thin, even layers; you lose 10 to 20 percent of output and don’t see it until you compare production logs. We remove the crust, flush the runoff off the roof, and leave your array clean enough that your system’s own production tracking shows the jump within a day or two.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Granbury
We clean and maintain arrays built on Enphase microinverters, Tesla power electronics, SolarEdge optimizers, and panels from Qcells, REC, and Panasonic. It doesn’t change how we clean, but it does change what we look for while we’re up there: SolarEdge optimizers need their mounting seals checked for dust intrusion, and Enphase systems let us verify per-panel recovery right after the rinse. We stock the common cleaning and inspection supplies for these systems locally, so Granbury jobs don’t wait on a shipment from somewhere else.
Common Solar Panel Cleaning Problems We See in Granbury Homes
- Lake-film crust on shoreline arrays. Homes within a half-mile of Lake Granbury’s 76048 shoreline collect algae and pollen faster than inland lots. If the film isn’t removed before the first 100-degree week, it hardens into a shell that simple rain won’t touch and production drops by up to 20 percent through the summer.
- Ice-storm grit after Gulf-driven freezes. February 2021 left a sheet of frozen particulate across every exposed array in Hood County. Homeowners who hosed it off with tap water etched their glass; the ones who called us got a deionized rinse that preserved the coating and restored output same day.
- Grackle droppings and panel hot spots. Grackle flocks around the lake roost on roof edges and leave acidic droppings that etch glass permanently. Once a hot spot forms, no amount of cleaning fixes it; the panel has to be replaced, which is why we push guard installation for lakeside homes.
- Undersized service entrances near the lake. Many older 76048 shoreline homes still run on 100-amp panels, and dirt-induced hot spots on panels can trip breakers that were already near capacity. We flag these when we’re on the roof, because the cleaning isn’t the root problem; the panel is, and it’ll keep biting you until it’s upgraded.
Pricing for Solar Panel Cleaning in Granbury, TX
A standard residential solar panel cleaning in Granbury runs $180 to $340 depending on array size, roof pitch, and whether we’re installing guards. Small arrays under 20 panels usually land at the low end; lakeside homes with steep pitches or heavy soiling run higher. Bird and critter guard installation adds $200 to $500 depending on perimeter length and the guard material. Post-storm cleaning sits in the $220 to $380 range because it requires deionized water and slower work. If you bring us a photo of your array or your address, we’ll quote a firm number before we step foot on the ladder. Free estimates, no signature wanted tonight. Take two weeks; the price will be the same.
We Also Serve Cities Near Granbury
Our crews run from our Dallas-Fort Worth office into Granbury and the surrounding area, including Pecan Plantation, Joshua, Cleburne, and Weatherford. If you’re just outside Granbury proper, we’re still close enough to reach you same day. For a full look at what we offer across the region, see Solar Panel Cleaning in Granbury.
Serving Granbury, TX - Our Local Coverage Area
We’re based in the Granbury area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Cleaning in Granbury
Cleaning can recover 10 to 20 percent of lost output on Granbury arrays, especially lakeside homes where algae and pollen crust over panels by mid-summer. In the Cross Timbers, oak pollen lands in April, lake algae blooms through May, and by July the heat has baked it into a light-blocking shell. After a proper deionized wash, most homeowners see production jump within one full sun cycle. Call (877) 550-6892 and we’ll tell you whether your array is dirty enough to make the cleaning pay for itself.
Yes, and sooner beats later. Ice storm grit sits on the glass and grinds into the anti-reflective coating every time the wind moves a particle. The longer it waits, the more permanent the damage. We run post-storm cleaning routes through 76048 and 76049 within days of major freezes, using deionized water that lifts grit without scratching. If you wait until the next hot week, you’re gambling with your array’s long-term output.
Yes, grackle droppings are acidic enough to permanently etch panel glass, and Granbury’s lake shoreline concentrates those flocks in exactly the neighborhoods where panels are already fighting algae and pollen. Once the glass is etched, the panel underperforms forever and the only fix is replacement. Guards are the cheapest insurance you can buy for a lakeside array. We install perimeter and under-panel mesh that keeps birds out while allowing airflow, and we’ll quote it alongside any cleaning.
It can, because every kilowatt-hour your panels don’t produce due to soiling is a kilowatt-hour you buy from the grid at retail. If your array is 15 percent underproducing from lake film, your true-up statement reflects that loss for an entire billing cycle. Cleaning before the summer production months means your exported and credited kWh numbers climb back to where they should be. Bring us a bill and we’ll show you the math.
Indirectly, yes. When panels run hotter because of dirt-induced hot spots, they pull more current, and a 100-amp panel near its limit can trip. We see this often in older 76048 shoreline homes originally permitted as seasonal properties under Hood County zoning. Cleaning removes the hot-spot trigger, but the undersized service is still there. We’ll tell you plainly if we see the panel is the real issue, and we’ll quote the service upgrade separately if you want it done.
If your Granbury array is underperforming and you suspect a season’s worth of lake film or storm grit is the reason, call Gus’s Solar at (877) 550-6892. We’ll give you a straight answer, a firm price, and a cleanup that shows up in your production app within a day.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Granbury and Hood County since 2011.






Before
After
Before
After
Before
After