Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Fast, Reliable Solar Panel Cleaning Across Glenn Heights
Solar panel cleaning in Glenn Heights doesn’t have to be a chore you keep putting off. A typical residential cleaning runs $150 to $300 depending on array size and access, and we can usually be at your home within 48 hours. Gus’s Solar has cleaned arrays across Glenn Heights for years, from the newer brick-veneer neighborhoods off Uhl Road to the master-planned sections near I-35E. Call (877) 550-6892 and you’ll get Gus or one of his crew on the line, not a call center.
What makes cleaning panels in Glenn Heights different from, say, DeSoto or Red Oak? It comes down to one thing you won’t hear from a generic cleaning outfit: this city straddles the Dallas-Ellis county line. That split changes how we verify your property before we even set a ladder. More on that below.
Key Takeaways:
- Residential panel cleaning in Glenn Heights typically runs $150 to $300; commercial arrays scale by panel count and roof access.
- We verify the correct county jurisdiction (Dallas or Ellis) before any crew touches your roof.
- Post-storm cleaning after North Texas hail or cottonwood season is our most requested Glenn Heights service.
- A live person answers 24/7 at (877) 550-6892. No voicemail, no ticket queue.
Why Gus’s Solar Is Glenn Heights’s Preferred Solar Panel Cleaning Company
Gus Petrakis started this company in 2011 and has kept it owner-operated since day one. That means when we clean panels in Glenn Heights, the name on the truck is the same name on the estimate. Gus sends his own background-checked, uniformed crew. No subs, no third-party cleaners with a rented pressure washer.
Glenn Heights homeowners tend to call us after two situations: a hailstorm rolls through the southern edge of Hail Alley and leaves panels caked in red clay and tree debris, or a cottonwood or grackle problem starts cutting into production. We know exactly what that looks like here because we’ve cleaned hundreds of Glenn Heights arrays. Response time to most Glenn Heights neighborhoods is 24 to 48 hours, and if you’re on the Ellis County side off Bear Creek Road or the Dallas County side near Hampton Road, we know which AHJ applies before we arrive.
Our Solar Panel Cleaning team carries deionized water, soft-bristle brushes, and the right fall protection for two-story brick-veneer homes common in Glenn Heights. We don’t use pressure washers on composition shingle roofs. We don’t use tap water that leaves mineral streaks on SunPower or Panasonic glass. We do the job the way we’d do it on our own roof.
Every cleaning is backed by the 90-Day Done Right Promise. If we miss a spot or your production doesn’t recover the way it should, one call brings Gus back. That’s in writing, on every job.
Our Solar Panel Cleaning Services in Glenn Heights
Glenn Heights sits in North Texas, with over 230 sunny days a year. That sun works in your favor most months, but it also bakes pollen, dust, bird droppings, and red clay onto your panels. Here’s what we handle most often for Glenn Heights homeowners.
Post-Storm Panel Cleaning
Hail storms and high winds are a fact of life here. After a spring storm, your panels may look fine from the ground but carry a layer of pulverized leaves, clay splatter, and pollen that cuts output by 10 to 18 percent. We cleaned a 6.2 kW array off East Bear Creek Road in a 2013 master-planned section of Glenn Heights after a May hailstorm left red clay and pollen so thick the microinverters were clipping production by 18%. Our crew verified the Ellis County parcel before setting ladders, then used deionized water and soft brushes to clear the soiling from the REC panels. Within two days the system’s daily kWh offset returned to the pre-storm estimate, and the homeowner scheduled a quarterly debris removal plan to keep the array clear of cottonwood droppings through summer. That’s the kind of before-and-after result we can usually show you right from your monitoring app.

Bird & Critter Guard Installation
Grackles and pigeons don’t care if your Glenn Heights home was built in 1998 or 2018. They’ll nest under any panel edge that gives them shade and a place to roost. In North Texas heat, dried pigeon droppings bake onto panel edges and can etch the anti-reflective coating if you scrub too hard. We install critter guard mesh around the array perimeter during or after a cleaning. It keeps birds out, keeps the next cleaning easier, and it’s a fraction of the cost of repairing scratched glass or chewed microinverter wiring.

Debris & Soiling Removal
Cottonwood trees are common in the older sections of Glenn Heights, and their droppings settle in the lower corners of panels where water tends to pool and dry. Add construction dust from all the new development around I-35E and you get a film that reduces output even when the panels look okay. We remove that soiling properly, with deionized water and soft agitation, then flush the drip edges so nothing re-deposits.

Scheduled Cleaning Plans
If you’d rather not think about panel maintenance at all, we offer quarterly and semi-annual plans for Glenn Heights homeowners. We track your array’s production history, schedule cleanings before cottonwood season and after hail season, and notify you when we’re coming. You get a discount on the per-visit rate and priority scheduling after storms. A live person answers 24/7 if you ever need to adjust a visit or report production that looks off.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Glenn Heights
Most Glenn Heights arrays installed after 2010 carry Panasonic, Canadian Solar, or REC modules with Enphase or SolarEdge electronics. We service all of those brands and more, and we stock cleaning supplies and replacement critter guard components sized for their specific frame profiles. If you have a FranklinWH battery or a Tesla gateway tied into your system, our crew knows how to work around that equipment safely during a cleaning. We don’t need to call a brand’s tech line to know where to step and where not to.
Common Solar Panel Cleaning Problems We See in Glenn Heights Homes
- Dual-county jurisdiction confusion: A home on the Dallas County side of Glenn Heights may need a different AHJ verification than a house across the street in Ellis County. A cleaning crew that doesn’t check the county parcel record before setting ladders can trigger a stop-work order from an inspector who sees unpermitted equipment on the roof. We check the parcel before we schedule.
- Hail Alley soiling cycles: Glenn Heights sits at the southern edge of Hail Alley. After a hailstorm, panels collect a layer of clay, leaf matter, and crushed pollen that a simple rinse won’t remove. If you wait, it bakes on in 100-degree heat and becomes a scrub job that risks scratching the glass if not done with deionized water and soft brushes.
- Cottonwood droppings on newer builds: Newer brick-veneer neighborhoods in Glenn Heights often planted cottonwoods as street trees. Their droppings settle in panel corners and along the lower edge of each module. Left through July, they dry hard and block water drainage. A scheduled cleaning plan handles this before it becomes a production loss.
- Baked-on bird droppings: It’s not an old-house problem. Birds nest under panels on brand-new Glenn Heights homes too, because builders don’t install critter guard. Dried droppings on a post-2010 SunPower or Panasonic panel can etch the anti-reflective coating if someone scrubs with a stiff brush. We remove droppings with a wetting agent first, then gentle agitation. No scratch, no coating damage.
Pricing for Solar Panel Cleaning in Glenn Heights, TX
Here are the numbers, straight from the estimate sheet we use for Glenn Heights jobs.
| Service | Typical Glenn Heights Price Range |
|---|---|
| Residential panel cleaning (up to 24 panels) | $150 - $220 |
| Residential panel cleaning (25-48 panels) | $220 - $300 |
| Post-storm debris removal & cleaning | $180 - $280 |
| Bird & critter guard installation (with cleaning) | $250 - $400 |
| Scheduled quarterly cleaning plan (per visit) | $120 - $190 |
| Commercial array cleaning (per panel, 100+ panels) | $3 - $5 per panel |
What moves the price? Roof pitch and story height matter most. A single-story, low-pitch roof on a typical Glenn Heights brick-veneer home is the easiest job and lands at the lower end. A two-story with a steep gable adds fall protection setup time. If critter guard needs removing before we can clean, that adds labor. If your system has a monitoring app, we’ll show you the before and after production numbers so you know exactly what you paid for. Estimates are free. Call (877) 550-6892 and we’ll give you a firm number before any work begins.
We Also Serve Cities Near Glenn Heights
Gus’s Solar handles panel cleaning across the southern Dallas County and northern Ellis County corridor, including DeSoto, Lancaster, Cedar Hill, and Red Oak. If you’re in Glenn Heights proper, you’re our home turf. If you have a neighbor in a nearby town looking for Solar Panel Cleaning in Glenn Heights quality work, send them our way. We serve the whole area with the same owner-operator standard.
Serving Glenn Heights, TX - Our Local Coverage Area
We’re based in the Glenn Heights area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Cleaning in Glenn Heights
Yes, and this is the one thing most out-of-town cleaning companies get wrong. We verify which county your parcel falls under before we schedule the crew, because a Dallas County AHJ can flag equipment on a roof where an Ellis County permit was never pulled, and vice versa. It adds a few minutes to our scheduling process and saves you from a stop-work order mid-cleaning. Call (877) 550-6892 with your address and we’ll check the parcel while you’re on the phone.
Glenn Heights sits at the southern edge of Hail Alley, so your panels get hit with hail scouring, red clay splatter, and shredded leaf litter that a garden hose won’t remove. After a hailstorm, we recommend a cleaning within two weeks before the soiling bakes on in 100-degree heat. A post-storm cleaning in Glenn Heights runs $180 to $280 for most homes, and we’ll check for hail impact damage while we’re up there.
It can, and the difference shows up fastest on homes with Enphase or SolarEdge monitoring. A heavily soiled array in Glenn Heights may lose 10 to 18 percent of daily production. Cleaned panels return to their rated output, which means you’re generating more of your own power instead of drawing from Oncor’s grid. If you’re on a TXU plan with a true-up, that extra production lands directly on your statement. We’ll show you the before and after kWh numbers from your own monitoring app.
Birds build nests under panels on Glenn Heights homes of every age. Builders rarely install critter guard, so a 2012 brick-veneer home off Uhl Road is just as likely to have grackles or pigeons under the array as a 1998 home. The difference is that newer SunPower or Panasonic panels often carry an anti-reflective coating that scratches more easily if dried droppings are scrubbed with a stiff brush. We use a wetting agent and soft brushes, and we can install critter guard the same visit. Most Glenn Heights homeowners pay $250 to $400 for cleaning plus guard installation.
Twice a year covers most Glenn Heights homes: once after spring hail season in May or June, and once in late fall after cottonwood and pollen season ends. If you have heavy tree cover or construction dust nearby, quarterly makes more sense. Our scheduled cleaning plans run $120 to $190 per visit and include priority post-storm response. Call (877) 550-6892 and we’ll look at your production history and recommend a schedule that matches your array and your street.
Call Gus’s Solar for Panel Cleaning in Glenn Heights
You don’t need to climb a ladder. You don’t need to guess whether your panels are dirty. Call (877) 550-6892, tell us your address in Glenn Heights, and we’ll verify your county parcel, check your array size, and give you a firm cleaning price. If you want to think about it for two weeks, the price will be the same. That’s how Gus has done business since 2011. One call, one crew, one name on the truck.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Glenn Heights and the surrounding Dallas-Ellis county corridor since 2011.






Before
After
Before
After
Before
After