Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Solar Panel Cleaning Across Garland
Solar panel cleaning in Garland typically runs $150-$320 for a standard residential array, and we can usually be at your door within 24 to 48 hours. If your panels are covered in pollen, clay dust, or bird droppings, you’re losing production every single day the glass stays dirty. Call Gus’s Solar at (877) 550-6892 and we’ll get your system back to its full output before the next GP&L billing cycle closes.
We know Garland’s neighborhoods, its weather, and the specific way our municipal utility settles its books. This matters more than you’d think. A dirty array in Garland doesn’t just cost you a few kilowatt-hours. Because GP&L credits your excess generation at avoided cost rather than retail rate, any soiling loss eats directly into the offset your system was sized to deliver. More on that below.
Why Gus’s Solar Is Garland’s Preferred Solar Panel Cleaning Company
Gus Petrakis founded this company in 2011, and his name sits on the building, the truck, and the work. When Garland homeowners call about cleaning, they talk to a live person. Not a menu tree. Gus’s crew are background-checked, uniformed, and they show up when they say they will.
We serve the 75043, 75044, 75045, and 75046 ZIP codes regularly, from the older ranch tracts on the west side to the newer HOA communities near Firewheel Town Center. We’ve cleaned arrays on original 1950s houses where a second-story addition shades half the morning, and on 2000s builds with roof geometry that catches every piece of airborne pollen North Texas throws at it. Our local reviews reflect the same thing our customers tell us at the hardware store: the job gets done right, the price doesn’t change, and Gus answers the phone.
Every cleaning job carries the same 90-Day Done Right Promise as our installs. If something isn’t right, Gus makes it right. In writing.
Our Solar Panel Cleaning Services in Garland
We offer the full range of Solar Panel Cleaning services, and we tailor the approach to what Garland’s climate and wildlife actually throw at your roof. Here’s what most households and businesses need.
Residential Panel Cleaning
Most Garland homes need a soft-brush wash and deionized rinse two or three times a year. Spring pollen from the surrounding countryside, summer construction dust, and the fine clay-pan soil that blows off the east Texas plains all collect on panel glass. We clean every module by hand, check the racking and wiring while we’re up there, and leave your production back where the GP&L-approved estimate says it should be.
Commercial Array Cleaning
Garland’s industrial parks and retail centers along I-30 and the PGBT corridor run big flat arrays that catch everything. We handle commercial roofs with water-fed pole systems and deionized water, so no ladder traffic on finished membrane roofs. Our scheduling is built around your operating hours, and we provide production logs before and after each visit.
Bird & Critter Guard Installation
Pigeons are relentless in Garland, especially around the Firewheel Town Center area in 75044 and the older shopping strips in central Garland. They nest under panels, their droppings etch the glass, and their nesting material clogs drainage gaps. We install galvanized mesh guard around the perimeter of your array, and we do it without drilling through your roof. The guard keeps birds out and air moving.
Debris & Soiling Removal
After a North Texas wind event or hail storm, your panels wear whatever the storm brought: leaves, shingle granules, mud, even hail stone residue. We remove the debris, inspect every module for impact damage or microcracks, and clean the glass properly. We also document everything for your insurance file if a claim is warranted.
Post-Storm Panel Cleaning
Garland sits in North Texas hail alley, and large-hail events are common enough that local insurers now push Class 4 impact-rated panels. After any serious storm, we recommend a full cleaning and inspection. Hail damage hides: a cracked cell can look like a smudge until it hot-spots and fails.
Scheduled Cleaning Plans
If your home backs up to pastureland, a busy road, or any construction corridor, dirt builds faster than the annual average. We offer scheduled cleaning plans for Garland customers who want the job on a calendar instead of a to-do list. You pick the frequency. We handle the rest.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
Gus’s crew cleans and maintains every major brand we install, and we work on systems installed by other companies too. We service arrays built with Panasonic, Canadian Solar, JinkoSolar, FranklinWH batteries, and the rest of the industry’s standard equipment. If your inverter is Enphase or SolarEdge, we can read the production data before and after the clean, so you see the recovery in numbers, not promises. We stock common replacement parts locally for Garland customers, and our turnaround on repairs and guard installations is measured in days, not weeks.
Common Solar Panel Cleaning Problems We See in Garland Homes
- Mineral spotting from Garland tap water. Rinsing panels with a garden hose on a hot roof leaves behind dissolved minerals that bake into the glass. Over time, that film permanently reduces output below the GP&L-approved production estimate. We use deionized water for every rinse, which evaporates clean.
- Pigeon guano on west-facing arrays in 75043. Bird droppings along the lower row are acidic. If they sit through a North Texas summer, they etch the glass permanently. Add a hailstorm, and the weakened glass is far more likely to crack. The fix is cleaning plus a guard install.
- Clay dust and pollen from surrounding pastureland. Garland’s east and north edges still run to open ground, and that fine soil loads the panel surface quickly. A 5-8% soiling loss on a system sized for 95-100% offset pushes you into a true-up bill.
- Pressure washer damage triggering rapid shutdown faults. Panels installed after GP&L’s rapid shutdown requirement have module-level electronics. A pressure washer can force water into those connections and trip the inverter. The system goes dark until a service call resets it. We never use pressure on the glass or the connectors.
Pricing for Solar Panel Cleaning in Garland, TX
Expect to pay $150-$220 for a standard residential array up to about 20 panels. Bigger systems run $220-$320. Here’s the breakdown of what’s typical in Garland right now:
| Service | Typical Garland Price |
|---|---|
| Residential panel cleaning (up to 20 modules) | $150-$220 |
| Residential panel cleaning (21-40 modules) | $220-$320 |
| Commercial array cleaning (per project) | $350-$900+ |
| Bird & critter guard installation (residential) | $400-$850 |
| Post-storm cleaning + inspection | $180-$280 |
What changes the number: roof pitch, panel count, access difficulty, and how much wildlife pressure you’re dealing with. The price you’re quoted is the price you pay. No signature wanted tonight. Bring us your most recent bill, and we’ll show you exactly what your production should be on a clean array. Call (877) 550-6892 for a free estimate.
Here’s the part that’s specific to Garland. GP&L sets export credits at avoided cost, not retail rate. What that means for the homeowner: your installer sized your array to offset 95-100% of your annual consumption, not to overbuild and sell excess back at a premium. The margin for error is thin. If dirt and soiling shave 5-8% off your output, you don’t just lose a little production. You fall short of the offset the city approved at interconnection, and that shortfall turns into a true-up statement balance at year-end. Clean panels are the cheapest way to make sure your system actually hits the number it was sized for.
One example from the field. On a 1970s ranch in the 75041 ZIP, our crew cleaned a 24-module REC array that had accumulated clay-pan dust and pollen from surrounding pastureland. After our soft-brush wash and deionized rinse, the Enphase microinverter data showed a 6% production recovery the next noon. That 6% was the difference between a balanced year and a true-up bill. The household was back to the exact production estimate the city approved at interconnection.
We Also Serve Cities Near Garland
Our Solar Panel Cleaning in Garland team also covers the surrounding communities: Sachse, Rowlett, Richardson, and Murphy. If you’re nearby and your panels need a clean, call (877) 550-6892 and we’ll check the schedule.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Cleaning in Garland
It means you should clean more often than homeowners in deregulated Oncor territory. Because GP&L credits excess generation at avoided cost, your array was likely sized conservatively to offset 95-100% of consumption. A small soiling loss puts you into a true-up bill. Twice a year is the baseline for most Garland homes; three times if you’re near open land or construction. Call (877) 550-6892 and we’ll tell you what your specific roof needs.
Yes. After any hail event, the cleaning should include a full module-by-module inspection for microcracks and impact damage. Hail damage can look like a smudge or a reflection irregularity on the surface. We clean, inspect, and document everything, and we photograph any damage for your insurance carrier. Post-storm cleaning and inspection runs $180-$280 for most residential arrays in Garland.
No. A soft-brush wash and deionized rinse does not alter your electrical system or interconnection configuration. What can cause problems is aggressive pressure washing, which can trip module-level rapid shutdown electronics and leave the system dark until a service call. We never use pressure on panel glass or connectors. Your interconnection stays exactly as the city approved it.
Cleaning removes the droppings, but it won’t stop the pigeons from coming back. The fix is a two-step: clean the soiled glass properly, then install a galvanized mesh guard around the array perimeter to block nesting access. Guard installation for a standard residential array in 75044 typically runs $400-$850, depending on array size and access. Call (877) 550-6892 for a quote.
In Garland, the answer is usually a combination. Summer roof-deck temperatures above 150°F suppress afternoon output on every panel, clean or dirty. But if your output is below the GP&L-approved production estimate by more than a few percent, soiling is the likely culprit. Our crew can read your Enphase or SolarEdge data, clean the array, and show you the production recovery in the monitoring app. Estimates are free.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Garland and the surrounding communities since 2011.