Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Solar Panel Cleaning Across Cedar Park
Solar panel cleaning in Cedar Park typically runs $150-$350 for a standard residential array, and most jobs are completed the same week you call. The reason it matters here more than most places: Cedar Park sits in a cedar pollen corridor, and when that yellow dust settles on your panels and bakes in 100°F sun, it forms a film that quietly cuts production. We know the neighborhoods, the HOA rules in Twin Creeks and Buttercup Creek, and exactly what it takes to get your array back to full output. Call (877) 550-6892 for a free estimate, and we’ll be straight with you about whether cleaning is worth it on your roof.
Why Gus’s Solar Is Cedar Park’s Preferred Solar Panel Cleaning Company
Gus Petrakis started this business in 2011, and he still answers his own phone. That matters in a town like Cedar Park, where a lot of homeowners got their panels from a door-knocker who disappeared the morning after install. We’re the crew you’ll see at the HEB on Whitestone, not a call center three states away.
Our Cedar Park customers call us back because we show up when we say we will, we wear uniforms, and we do not hand work off to subs. The person who quotes the job is the person on your roof. That’s a simple standard, but around here, after 29 years of watching national outfits cycle through town, you learn it’s the only one that holds.
A live person answers our phone 24/7, even during a July hailstorm when every other company is backed up two weeks. If your panels took a hit and you’re watching your Enphase app show a production dip, we’ll send someone out, not open a ticket.
Our 90-Day Done Right Promise applies to every cleaning: if something isn’t right, Gus comes back and makes it right, in writing. No fine print, no “that’s not covered.”
Our Solar Panel Cleaning Services in Cedar Park
Residential Panel Cleaning
Most Cedar Park homes have builder-tract arrays on composition shingle roofs, and those panels collect a specific kind of grime: cedar pollen in spring, limestone dust in summer, and road film if you live near the 183A corridor. We clean with deionized water and soft brushes, never hard water from your tap, because the mineral streaks from Cedar Park’s hard water actually reduce light transmittance more than the dirt did. A standard residential cleaning takes our crew about two to three hours from setup to final inspection.
Commercial Array Cleaning
We clean commercial arrays on retail centers, churches, and office parks across Cedar Park’s 78613 and 78630 ZIP codes. For building owners, the math is different: a 100 kW array losing 8% to soiling is leaving real money on the table every billing cycle. We schedule commercial cleanings around your business hours, including early mornings before the Texas sun turns the roof into a skillet.
Bird & Critter Guard Installation
Bird nesting under panels is a bigger problem in Cedar Park than most people realize, especially in HOA-governed communities like Twin Creeks where eaves and recessed panel edges give pigeons and grackles a protected spot. Nesting debris scratches the glass, and droppings create hot spots that degrade cells over time. We install critter guard that seals the panel perimeter without altering your roof or voiding your panel warranty, and we match it to your specific racking system, whether that’s IronRidge, SnapNrack, or Unirac.
Debris & Soiling Removal
After a central Texas wind event, the real problem isn’t the big branch you can see, it’s the fine layer of dust, pollen, and hail-impacted debris that bakes on once the sun returns. That film is stubborn. A hose and a squeegee won’t cut it, and in some cases it makes things worse. We use gentle agitation and deionized water to lift bonded soiling without micro-scratching the glass, which is a real risk with DIY cleaning on panels that catch Cedar Park’s 228 peak sun days.
Post-Storm Panel Cleaning
Cedar Park sits in a hail belt, and the storms that roll through on spring afternoons leave more than dents in your truck roof. Hail-impacted debris, leaf fragments, and gravel dust from construction sites along Whitestone scatter across your array and then bake in place. Our post-storm cleaning includes a thorough visual inspection of every panel, checking for micro-cracks and impact points, and we document everything with photos so you have a record for your insurance adjuster if a claim is warranted. Call us the day after the storm; the longer debris sits, the harder it is to remove without aggressive methods.
Scheduled Cleaning Plans
For Cedar Park homeowners who want to stop thinking about it, we offer scheduled cleaning plans. Twice a year, spring and fall, we come out, clean, and inspect. The spring visit catches the cedar pollen and oak season. The fall visit catches the summer dust and checks for bird activity before the winter roosting season begins. Plans are priced per panel count, and you lock in your rate, which is a nice hedge against the price creep you’ll see from one-off quotes when everyone calls at once in April.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cedar Park
We clean and maintain arrays from every major brand you’re likely to have on your roof in Cedar Park: Qcells, REC, SunPower, Canadian Solar, and the rest. More importantly, we know how cleaning interacts with the production monitoring you already use. If you’ve got an Enphase-compatible monitor or a SolarEdge inverter, we’ll show you the before and after numbers on your own app, not ours. We don’t push brand-loyalty. We push clean glass and honest data. For Cedar Park homeowners with Tesla Powerwall systems, we pay special attention to the array segments that feed your battery charge window, since those panels are doing the heaviest lifting during peak rate avoidance.
Common Solar Panel Cleaning Problems We See in Cedar Park Homes
- Baked-on cedar pollen and dust from spring. Cedar Park’s spring pollen season is aggressive, and when that yellow layer gets wet from a passing shower and then dried by 100°F sun, it becomes a film that a standard rinse won’t remove. This is the most common call we get from homeowners on the east side of 183A, where morning sun bakes the overnight pollen load from the greenbelt areas.
- Bird nesting in HOA-governed communities. We see nesting under panel edges more in Twin Creeks, Buttercup Creek, and Whitestone corridor master-planned neighborhoods than in older parts of town. HOA landscaping gives birds cover, and the recessed mounting on builder-tract arrays creates inviting gaps. Nesting debris scratches panel surfaces during high winds and droppings concentrate heat on individual cells, which leads to hot spots and premature micro-inverter failure.
- Hard-water mineral streaks from DIY cleaning. Cedar Park’s water is moderately hard, and homeowners who use a hose and squeegee often leave a mineral residue that actually makes things worse. We’ve tested this: a panel cleaned with tap water and left to dry in July sun can lose more production to mineral streaking than it was losing to the original dust. That’s why we use deionized water exclusively.
- Hail-impacted debris that bakes on after a storm. The central Texas hail belt doesn’t just dent; it pulverizes leaves, bark, and construction dust into a fine paste that adheres to panel glass. If it sits through a full sun cycle, it hardens into a layer that requires careful chemical softening to remove without scratching. Waiting too long after a spring storm is the most expensive mistake we see, because aggressive cleanup costs more than a prompt one.
Pricing for Solar Panel Cleaning in Cedar Park, TX
A typical residential cleaning in Cedar Park runs $150-$350, based on panel count, roof pitch, and accessibility. Most standard builder-tract homes with 20-30 panels on a single-story roof fall in the $180-$250 range. Two-story homes or arrays on steep pitches run higher because of safety rigging. Commercial arrays are quoted per panel, typically $3-$5 per panel for ground mounts and $4-$7 per panel for rooftop systems, depending on soiling level and access.
- Residential clean, 20-30 panels, single story: $180-$250
- Residential clean, 30-40 panels, two-story: $250-$350
- Post-storm clean with debris removal: $200-$300
- Bird & critter guard installation (materials + labor): $500-$1,100 depending on perimeter length
- Scheduled cleaning plan (2 visits/year, 25-panel array): $300-$450/year
Every quote is a flat price. You’ll get the number, in writing, before we touch your roof. No “it depends” after we start. And if you bought from a door-knocker who quoted one thing and charged another, bring us their estimate: we’ll give you a free second opinion on what they wrote. Call (877) 550-6892 for your exact price, and take two weeks to think about it. The price will be the same.
We Also Serve Cities Near Cedar Park
Our crews work throughout the Cedar Park area and the surrounding communities. We serve Solar Panel Cleaning in Cedar Park and regularly schedule cleanings in Brushy Creek, Anderson Mill, Jollyville, and Leander. If you’re on the edge of 78613 or 78630 and wondering if we come to you, call us. If it’s inside our own county, there’s no trip charge, and that’s been true since day one.
How Cedar Park’s Electric Market Changes the Cleaning Conversation
Here’s something you won’t hear from a national cleaning chain: Cedar Park sits just outside Austin Energy’s service territory. That means the buyback rate for your exported solar production depends on your specific retail electricity provider under ERCOT deregulation, and some REPs offer near-zero credit for what you push back to the grid. If your buyback rate is close to zero, every kWh you produce but don’t use yourself is essentially wasted. That changes how stringently we recommend cleaning. A dirty panel isn’t just losing 8% or 10% of production; on a near-zero buyback plan, that loss is coming directly out of the portion of your bill you can actually offset. For homeowners in Cedar Park with a battery system like a FranklinWH or Tesla Powerwall, clean panels during the charge window are the difference between filling the battery by noon or limping to 80% by sundown. This is a different conversation than what an Austin installer would have with you, because Austin Energy’s standardized rates make soiling losses more abstract. Here, the math is on your REP’s bill, and we’ll walk you through it before we ever put a brush to glass. Bring us a bill, we’ll bring you the math.
Serving Cedar Park, TX - Our Local Coverage Area
We’re based in the Cedar Park area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Cleaning in Cedar Park
Twice a year is the right cadence for most Cedar Park arrays: once after the spring cedar and oak pollen season ends in late May, and once after the summer dust and fall leaf debris settles. If you live near a construction site along the 183A corridor or Whitestone, you may want a third visit, because airborne construction dust here is finer than typical Texas dust and it adheres aggressively. If you’re on a near-zero buyback REP plan, clean panels matter more to your bill, so twice a year is the minimum we’d recommend.
Yes, bird nesting under panels reduces production in two ways: droppings create hot spots on individual cells that degrade output, and nesting debris scratches the glass during high wind. In Twin Creeks and other HOA-governed communities, landscaping gives birds cover and recessed panel edges give them a protected place to nest. The right first step is having critter guard installed along the panel perimeter, which seals the gap without voiding your panel warranty or altering your roof. If nesting is already established, we clean first, then install the guard, then you document the change in your production app so you can see exactly what the fix did.
Yes, and this is a uniquely Cedar Park question. Because your buyback rate depends on the REP you chose under ERCOT deregulation, a homeowner with a generous buyback plan can afford some soiling losses, while a homeowner on a near-zero buyback plan loses real bill savings every day their panels are dirty. If you’re on a flat-rate export plan with no meaningful credit, we’d recommend staying on a strict twice-yearly cleaning schedule and being aggressive about post-storm cleanups. Call (877) 550-6892 and we’ll help you read your specific REP’s solar buyback terms before you decide on a cleaning plan. Free estimate, no signature needed tonight.
A post-storm cleaning includes removal of hail-impacted debris, leaf fragments, and any construction dust or pollen that was driven onto the panels by storm winds, followed by a full visual inspection of every panel for micro-cracks, impact points, and hot-spot damage. We photograph everything and give you a written record you can use with your insurance adjuster. If we find damage that needs panel replacement, we’ll tell you, and we’ll quote the repair separately. We don’t do insurance claims, but we’ll give you the documentation your adjuster expects to see.
Often yes, because the film that forms on Cedar Park panels, cedar pollen mixed with limestone dust and baked by high UV, is nearly invisible but measurably reduces light transmittance. We’ve cleaned panels that looked clean and seen a 4-7% production jump on the next full sun cycle. If you have Enphase per-panel monitoring, we can pull your numbers before and after and show you exactly what the cleaning did. If your production has dropped and you can’t see why, call us. We’ll diagnose it, and if cleaning won’t help, we’ll tell you that too. (877) 550-6892.
Get Your Cedar Park Panels Cleaned Right
If you’re losing production to Cedar Park’s pollen, dust, or post-storm grime, or if you’ve got birds building a nest under your panels, we can fix it. Call (877) 550-6892 for a free estimate. A live person answers, day or night. And if a salesman ever tells you the price changes if you don’t sign tonight, the answer is no. Our price is our price, and it’ll be the same next week.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Cedar Park since 2011.