Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Solar Battery Storage & Backup Across Los Angeles
Solar battery storage in Los Angeles means pulling power from your own rooftop instead of LADWP’s tiered rates at 6 p.m. in August. A properly sized battery system in Los Angeles typically runs $12,000 to $18,500 installed after incentives, and the payback math changes block by block depending on your zip code, your panel’s age, and whether you’re on LADWP’s current NEM schedule or an older legacy rate. We’ve been in attics and alley-load garages across Los Angeles long enough to know which questions to ask before we quote a number. Call (877) 550-6892 and ask for Gus directly. He answers.
Why Gus’s Solar Is Los Angeles’s Preferred Solar Battery Storage & Backup Company
Gus Petrakis puts his name on the truck, not a logo. He founded the company in 2011 and still walks every Los Angeles job site himself before the crew unloads. That matters here, because solar battery work in Los Angeles is not a generic install. LADWP has its own interconnection queue, its own rate schedules, and its own approval workflow that runs through both LADBS and LADWP at the same time. A contractor who treats Los Angeles like any other SCE city will misquote your timeline. We don’t.
Our Los Angeles customers call a live person at 3 a.m. if their battery throws an error, and Gus’s own crew shows up, not a sub. Every solar battery job carries the 90-Day Done Right Promise in writing. If it’s not right, Gus makes it right, and one phone call brings him back. No ticket portal. No “your call is important to us.” Just a human voice and a truck with his name on it.
Our Solar Battery Storage & Backup Services in Los Angeles
Tesla Powerwall Installation in Los Angeles
A Tesla Powerwall 3 install in Los Angeles typically runs $11,000 to $15,500 for a single unit before any local rebates. The real question in Los Angeles is whether your existing panel can pass LADWP’s rapid shutdown and interconnection requirements. In Koreatown’s 1920s bungalows and Silver Lake’s hillside stucco cottages, the answer is often no, and the panel upgrade becomes part of the job. We’ll tell you that on the first visit, not after you’ve signed.
Enphase IQ Battery Installation in Los Angeles
The Enphase IQ 5P is a strong fit for Los Angeles homes with tight electrical rooms or alley-load access, because the modular design means our crew can carry units through a narrow walkway instead of positioning a crane in the street. A full Enphase battery system in Los Angeles runs $9,800 to $14,200 installed depending on stack size. We pair it with your existing Enphase microinverters so the whole system talks in one language.
Whole-Home Backup Power in Los Angeles
Whole-home backup in Los Angeles means your refrigerator, medical equipment, and lights keep running through a heat wave or a public safety power shutoff. A two-battery whole-home setup in Los Angeles typically lands between $20,000 and $28,000 before tax credits, with the final number driven by your load profile and whether your panel needs upgrading from the original 100-amp service we see constantly in 90001 through 90010. We size the system off your actual bill, not a brochure calculation.
Battery Retrofit for Existing Solar in Los Angeles
If you already have rooftop solar and want storage, the retrofit path in Los Angeles usually runs $10,500 to $16,000 for a single battery added to a compatible inverter setup. This is the service we emphasize for Los Angeles customers, because so many homes here installed solar between 2015 and 2020 under older NEM rules and now face LADWP’s current export rates that pay pennies for daytime surplus. A retrofit with time-of-use optimization changes the math completely. We’ll show you the year-25 numbers before we touch a wire.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Los Angeles
We work with Tesla, Enphase, and FranklinWH equipment daily across Los Angeles, and we keep common replacement parts on the shelf locally so a battery expansion doesn’t stall for a week waiting on a freight truck from Texas. If you already have a SolarEdge inverter and want to add FranklinWH’s aPower battery, we can hybrid that system without ripping out what works. Bring us a bill, we’ll bring you the math. That’s how we quote in Los Angeles.
Common Solar Battery Storage & Backup Problems We See in Los Angeles Homes
- LADWP dual-approval stalls: Your battery permit has to clear LADBS and LADWP at the same time, and if either queue resets, you lose weeks. We file both in parallel and track the status daily.
- Original 100-amp panels from the 1920s-1950s bungalow stock: Most homes in 90001-90010 cannot pass LADWP’s rapid shutdown verification without a panel upgrade first. We quote the panel work as part of the battery job, not a surprise change order.
- Alley-load garages with overhead clearance issues: A 16-foot truck cannot clear every power line in Echo Park or West Adams. Our techs walk the route with a tape measure before arrival, not after the truck is stuck.
- Remnant aluminum branch wiring in 1950s stucco cottages: LADWP’s rapid shutdown checks can fail on old aluminum wiring, resetting your interconnection queue. We verify the branch circuits before we schedule the battery install.
Pricing for Solar Battery Storage & Backup in Los Angeles, CA
Here are real numbers for the Los Angeles market, not national averages. A single Tesla Powerwall 3 installed: $11,000-$15,500. An Enphase IQ battery system with two units: $14,000-$19,000. A FranklinWH aPower whole-home setup: $16,500-$22,000. A battery retrofit to an existing solar array: $10,500-$16,000. Panel upgrades, when required, add $2,800-$4,500. These ranges reflect Los Angeles labor rates, LADWP permit fees, and the panel-upgrade reality of our older housing stock. We quote off your actual bill and your actual panel, and the price we give you is the price you pay. Call (877) 550-6892 for a free estimate. Take two weeks to think about it. The price will be the same.
We Also Serve Cities Near Los Angeles
Our Los Angeles crews work throughout Koreatown, Echo Park, Silver Lake, and View Park-Windsor Hills regularly, so if your home sits near the 10 or the 101, we’re already in your neighborhood. This Solar Battery Storage & Backup in Los Angeles coverage area extends across the whole city, from the 90001 flatlands up through the hills.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Battery Storage & Backup in Los Angeles
Yes, and it’s usually the biggest reason to add a battery in 90008. Your LADWP true-up statement reflects how much energy you exported during high-sun hours versus what you pulled from the grid at night. Without a battery, you’re exporting at mid-day rates and buying back at evening rates. With a battery sized to your actual evening load, you stop the buy-back almost entirely. We’ll model your true-up on your last twelve months of LADWP bills before we recommend a battery size. Call (877) 550-6892 and we’ll walk through your statement together.
It can, and this is something almost no contractor checks before quoting 90008. The Baldwin Hills-Inglewood Oil Field sits directly beneath portions of Baldwin Hills and Crenshaw, and some parcels carry surface-rights encumbrances or subsurface easements held by Legacy Oil. When those show up during title review, LADBS can stall permit issuance while the paperwork gets sorted. We pull a full preliminary title report before we schedule a site assessment in 90008, so we catch it early instead of two months into your project.
Because most Koreatown homes built between the 1920s and 1960s still run on the original 100-amp or sub-100-amp service panel, and LADWP’s rapid shutdown and interconnection verification requires more headroom than those panels provide. An Enphase IQ Battery adds a 20-amp backfeed breaker minimum, and an overloaded 100-amp panel cannot clear LADWP’s safety thresholds. We include the panel upgrade in the quote from day one, so the number you see is the number you pay. Call (877) 550-6892 for an exact figure for your home.
It changes your production curve, which changes how much battery you need. Inland South LA neighborhoods like Baldwin Hills and Crenshaw largely escape the morning marine layer that suppresses generation in Santa Monica or Venice from June through August. That means your solar array starts producing earlier, giving you more daytime kWh to store before the evening peak. We size Los Angeles batteries off the actual production curve for your block, not a flat citywide average, because a battery sized for Santa Monica’s fog will be oversized for South LA’s sun.
First, look for the throughput clause and the end-of-warranty capacity percentage. A good battery warranty in Los Angeles specifies at least 70% retained capacity at year 10 or a throughput floor that matches your expected cycles under LADWP’s time-of-use structure. Second, confirm whether the warranty covers labor or just the hardware, because a replacement battery with a $1,500 install fee is not free. Third, check the manufacturer’s degradation rate against your actual cycle count, not the day-one brochure number. We quote the year-25 output, not the marketing sheet, and we’ll put the warranty terms in writing before you sign. Call (877) 550-6892 for a free second opinion on any written estimate you’ve already received.
LADWP, Oil Fields, and Why Your Battery Quote Must Come From Someone Who Knows This City
Every residential battery install in ZIPs 90001 through 90008 sits inside LADWP territory, the largest municipal utility in the country. That means your interconnection, your permit, and your rate schedule are governed by LADWP’s own processes, not SCE’s, and the two approval workflows run concurrently through LADBS and LADWP. We’ve watched installers from outside Los Angeles quote a six-week project and deliver a five-month wait because they didn’t understand the dual-approval queue. Last month our crew finished a Tesla Powerwall 3 retrofit on a 1923 bungalow in West Adams whose original 100-amp panel couldn’t pass LADWP’s rapid shutdown requirements. We upgraded the panel, set the battery’s backup reserve to match the homeowner’s tiered rate schedule, and produced a day-one production estimate of 22 kWh offset. Then we kept the inverter’s firmware updated so the degradation rate stays on the warranty’s year-25 sheet. That’s the difference between a Los Angeles installer and a national sales crew working the same zip code.
Get Your Los Angeles Battery Quote From a Name You Can Verify
Gus Petrakis founded this company in 2011, and his name, address, and license number are published on every quote. He answers his own phone. If a salesman needs an answer tonight, the answer is no. If you need a straight quote on a solar battery in Los Angeles, call (877) 550-6892 and ask for Gus. He’ll walk your roof, read your LADWP bill, and tell you what this city’s electric reality means for your home. Free estimate. No signature wanted tonight. Take two weeks. Think about it.
Written by Gus Petrakis, Owner at Gus’s Solar. Founded in 2011. Locally owned, L.O.C.A.L. values: Local roots, On time, Community first, Accountable, Loyal.