Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Solar Battery Storage & Backup Across Hurst
Solar battery storage in Hurst runs between $12,500 and $18,900 for a single Tesla Powerwall 3 or Enphase IQ Battery 5P installed, including the 200-amp panel upgrade that three out of four mid-century homes here need. Most Hurst installations take one to two days once the panel swap is complete, and we can usually have a crew at your door within 48 hours. If your house was built between 1964 and 1978, there’s a good chance your electrical panel is the original 100-amp Federal Pacific or Zinsco unit, and that single fact shapes every battery quote you’ll get in Hurst. Call (877) 550-6892 and we’ll walk you through what your house actually needs.
Gus Petrakis has had his name on this company since 2011, and the team answering your call works out of our Dallas-Fort Worth office, not a call center three states away. When a spring hail cell rolls through Hurst and knocks out power along Pipeline Road or through the neighborhoods off Harwood, the same crew that installed your system is the one you reach. We know these streets. We know these panels.
For a full look at what battery storage does and how it pairs with solar, see our Solar Battery Storage & Backup service page. For everything specific to this city, including pricing and the panel-upgrade question every Hurst homeowner asks, read on.
Why Gus’s Solar Is Hurst’s Preferred Solar Battery Storage & Backup Company
We don’t run door-knocking crews in Hurst. We don’t have a rotating cast of salespeople working the neighborhoods around Bellaire Drive or the streets behind Hurst Hills Elementary. What we have is an owner whose name is on the truck, a published address, and a license number you can verify, and 29 years of roots in these communities. Gus started this company because he got tired of watching national outfits quote one number over the phone and another at the kitchen table. That doesn’t happen with us. The number we quote is the number you pay.
Hurst homeowners call us for battery work because we answer the phone. Not a ticketing portal, not a voicemail box, not “press 2 for existing customers.” A live person picks up at (877) 550-6892, 24 hours a day. That matters at 2 a.m. when a spring storm has knocked out your grid and your battery shows an error code you’ve never seen. Gus’s crew does the install, not a subcontractor we’ve never met. Background-checked, uniformed, and accountable to the name on the side of the van.
Every battery and solar job in Hurst carries the 90-Day Done Right Promise in writing. If it’s not right, Gus makes it right. One call brings him back. Take two weeks to think about any quote we give you. The price will be the same. If a salesman needs an answer tonight, the answer is no.
Our Solar Battery Storage & Backup Services in Hurst
Here’s what we actually do for Hurst homeowners, day in and day out. Each of these comes with an honest assessment of your existing equipment, your actual utility bill, and whether the math works for your specific house.
Battery Retrofit for Existing Solar
This is the core of our work in Hurst, and it’s more involved than most out-of-state installers will tell you. Homes built in the 1965-to-1978 wave that defines so much of Hurst’s housing stock often have solar arrays installed in the 2010s paired with original 100-amp panels. Retrofitting a battery becomes a two-line-item job: the battery itself, plus the panel swap Oncor requires before interconnection. We quote both. We don’t hide the panel cost and then “discover” it at permit time.
Whole-Home Backup Power
If you want your central AC running during a July outage in Tarrant County, that’s a different spec than keeping your fridge and lights on. Whole-home backup in Hurst typically means one or two Tesla Powerwall 3 units or a FranklinWH aPower setup, sized against your actual compressor’s locked-rotor amps and your annual usage from your real bill, not a brochure estimate. Bring me a bill, I’ll bring you the math. That’s the standard here.
Tesla Powerwall Installation
The Powerwall 3 is our most-requested battery in Hurst because it handles the surge loads from 3-ton and 4-ton AC condensers common in these 1,800-to-2,400-square-foot ranch homes better than most competitors. Installation typically runs one full day after the panel or service upgrade is complete. We integrate it with existing solar, whether you have Enphase microinverters, SolarEdge optimizers, or a string inverter that predates rapid shutdown requirements.
Enphase IQ Battery Installation
For Hurst homes already running Enphase IQ7 or IQ8 microinverters, adding an Enphase IQ Battery 5P keeps everything in the same monitoring ecosystem. That’s a meaningful advantage when your 2015-era array wasn’t designed for storage. The system talks to itself without translation hardware. For houses off Harwood Road or down in the 76054 zip code with older Enphase gear, this is often the cleanest retrofit path.
For the full breakdown of how storage interacts with your solar array, visit our Hurst city page, where we cover the local hail angle and panel requirements in detail.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Hurst
We install and service Tesla Powerwall, Enphase IQ Battery, FranklinWH aPower, and SolarEdge-compatible storage. We carry common parts for these systems in our DFW stock so a Hurst service call doesn’t wait on a freight delivery from California. When a Powerwall throws a code or an Enphase IQ Battery stops discharging, we can usually be there the same day with the right component, not a “we’ll order it and circle back.” The same goes for our Solar Panel Repair in Hurst.
Common Solar Battery Storage & Backup Problems We See in Hurst Homes
- Original Federal Pacific or Zinsco 100-amp panels overheating. When a battery and a solar array both push current through a panel built for 1968’s electrical loads, things get hot. Breakers trip during peak production. In some cases, these legacy panels have known safety issues that make the panel swap urgent, not optional. That’s why Oncor’s queue requires the 200-amp upgrade before battery interconnection in most of Hurst’s original housing stock.
- Legacy string inverters failing rapid shutdown inspection. Adding a battery triggers a new electrical permit, and that permit brings current code with it. A string inverter from 2014 without module-level rapid shutdown won’t pass. That means a microinverter or DC optimizer retrofit before the battery goes in. In Hurst, where so many solar arrays date from the 2013-to-2017 build-out, this is a line item on a big share of our battery quotes.
- Hip roofs limiting array size, limiting battery recharge. A 1960s ranch with a hip roof and a compact lot doesn’t always have enough south-facing roof area for a large array. When the grid drops during a winter ice storm, an undersized array can’t fully recharge a battery each day. We run the roof-mount and azimuth math before we quote, so you know what your battery can actually recharge given the panels you have and the roof you’re on.
- Hail damage to exposed battery enclosures and conduit runs. Battery enclosures are engineered for weather, but Tarrant County hail is a different animal. Golf-ball stones at 50 mph will dent a FranklinWH aPower’s outer shell and shatter unprotected conduit. We flash, shield, and route battery connections here the way the local storm history demands. That’s not a concern an installer from El Paso would even think to address.
Our crew recently retrofitted a 1969 ranch off Harwood Road where the original 100-amp Federal Pacific panel fed a 2015 solar array with no battery, a case where Solar Panel Maintenance & Monitoring - Hurst had been overdue. The homeowner’s Enphase microinverters were producing fine, but rapid shutdown during a March hail storm left the house dark for nine hours. We pulled the old Zinsco breakers, set a 200-amp service, and installed a Tesla Powerwall 3 alongside the existing IQ7 microinverters. Now the fridge, AC condenser, and two bedrooms stay up while the array recharges through the night. That job is the Hurst norm, not the exception.
Pricing for Solar Battery Storage & Backup in Hurst, TX
Here are real numbers for the Hurst market, not brochure ranges designed to get a salesperson in the door.
Hurst Battery Pricing
| Service | Typical Hurst Range | What It Includes |
|---|---|---|
| Single battery install | $12,500 – $18,900 | Battery, inverter (if needed), mounting, wiring, basic panel connection |
| 100-amp to 200-amp panel upgrade | $3,800 – $6,200 | Service replacement, main breaker, grounding, Oncor interconnection paperwork |
| Battery retrofit to existing solar | $7,500 – $13,400 | Battery, rapid shutdown retrofit if required, inverter integration, load wiring |
| Whole-home backup (2-battery system) | $24,000 – $35,000 | Two batteries, panel upgrade, critical load panel, full-home wiring, commissioning |
| Time-of-Use / NEM 3.0 optimization programming | $900 – $2,200 | Battery discharge scheduling, load-shaving setup, rate-plan alignment |
The panel upgrade is the line item most Hurst battery quotes either hide or ignore. Your home, built during the 1964-to-1978 wave, almost certainly has a 100-amp panel. Oncor’s current solar and battery interconnection requirements don’t care how nice your ranch looks. The 200-amp swap comes first. We quote it on the front page, because you should know what the job actually costs. Free estimates. The number we write down is the number on the contract. Call (877) 550-6892 and we’ll come look at your panel, your roof, and your bill.
We Also Serve Cities Near Hurst
Our crews work all over the Mid-Cities. In addition to Hurst, we take battery storage and backup calls in Hurst‘s neighbors: Bedford, Richland Hills, North Richland Hills, and Colleyville. Same pricing, same crew, same owner on the truck. If you’re in one of those cities and your grid flickers every time a cell rolls through Tarrant County, call us.
Serving Hurst, TX - Our Local Coverage Area
We’re based in the Hurst area and know this community well, and we also handle EV Charger Installation in Hurst. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Battery Storage & Backup in Hurst
In most Hurst homes built between 1964 and 1978, yes. Your original Federal Pacific or Zinsco 100-amp panel can’t safely handle the combined current of a solar array and a battery in full discharge. Oncor’s interconnection requirements for battery-backed solar make the 200-amp service upgrade a prerequisite, not an option. We quote the panel swap as a separate line item so you see the full cost up front. In Hurst, this is the norm, not an upsell. Call (877) 550-6892 and we’ll confirm what panel you have in about five minutes.
A properly sized single battery will run a 3-ton AC condenser, your fridge, and a few bedroom circuits for a few hours of heavy use. Two batteries will get most Hurst ranch homes through the night with the AC cycling. The catch is recharge: if your array is small or your roof doesn’t have enough south-facing space, the battery won’t refill as fast during a cloudy week. We check that math before we quote so you aren’t surprised at 2 a.m. during the next March storm. Estimates are free.
Your net metering agreement under Oncor doesn’t reset when you add a battery in most cases. The battery sits behind the meter and changes when you use your stored solar, not how much your array exports. Some of Hurst’s older 2013-to-2017 solar arrays are on legacy net metering structures that won’t be affected by a battery retrofit. We’ll pull your exact interconnection agreement before we touch anything, and if the numbers don’t pencil out, we’ll tell you. That’s how Gus has run this company since 2011.
It depends on whether your 2015-era inverter has module-level rapid shutdown. Most string inverters from that era don’t, and adding a battery triggers a new electrical permit that brings current code with it. That means a microinverter or DC optimizer retrofit before the battery can be connected. If you already have Enphase IQ7 or newer microinverters, your existing gear often works with a new battery. We’ll tell you what your specific system needs. No guesswork.
Hail here in Hurst is a two-part problem for battery systems: physical impact on enclosures and conduit, and the grid outages that follow the storm. Enclosures are built for typical weather, but Tarrant County hail regularly exceeds what a standard mount was designed to take. We shield and route connections with that specific storm history in mind. The second issue is what happens after the hail knocks out the grid: your battery becomes your only power source. That’s why sizing matters in Hurst more than in a market with cleaner weather. Call (877) 550-6892 and we’ll run the numbers for your street, your roof, your panel.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Hurst and the surrounding Tarrant County communities since 2011.
Ready to see what a battery would actually cost for your house? Call (877) 550-6892 today for a free estimate. A live person answers. Bring me a bill, I’ll bring you the math.