Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable EV Charger Installation Across Marble Falls
A Level 2 EV charger install in Marble Falls typically runs $1,200 to $2,800, and most jobs are done in one day once PEC approval comes through. That quote includes the charger, all wiring, the breaker work, and any conduit runs from your panel to the driveway or garage wall. If your panel is older or full, the cost moves up from there, which we get into below. We know Marble Falls homes and we know Pedernales Electric Cooperative’s rules cold, so the quote you get from us is the number you pay. Call (877) 550-6892 and Gus or one of his crew will talk you through what your house actually needs, no pressure and no signature tonight.
Why Gus’s Solar Is Marble Falls’s Preferred EV Charger Installation Company
Gus Petrakis put his name on this company in 2011, and he still answers the phone. That is not a marketing line. Homeowners in Marble Falls call, and a live person picks up, 24/7. When you hire us to wire a Level 2 charger into your garage, you get Gus’s own crew, not a subcontractor handed a work order from three time zones away. The people who show up are background-checked, uniformed, and they know the difference between a 100-amp panel in a 1970s limestone-block house and a 200-amp service in a newer lakefront build. Our standing offer applies here like everywhere else: no trip charge inside our own county, free second opinions on any written estimate, and 10% off for seniors and veterans, forever.
We also do something the big chains will not: we read PEC’s interconnection and load-side approval paperwork before we quote the job, not after. That saves Marble Falls homeowners from the most common and most expensive mistake in this town, a charger that trips the main breaker because nobody checked the service size first.
Our EV Charger Installation Services in Marble Falls
Level 2 Charger Installation
A Level 2 charger on a 240-volt circuit adds about 25 to 35 miles of range per hour, which covers a full day of driving around the Highland Lakes with an overnight charge. In Marble Falls, the usual path is a dedicated 50-amp circuit from the main panel to a wall-mounted unit in the garage or on an exterior wall by the driveway. PEC treats a Level 2 charger as a continuous load, which means the permit path goes through their load-side review. We handle that paperwork from start to finish, so you are not sitting on hold with the co-op.
Tesla Wall Connector Installation
We install a lot of Tesla Wall Connectors in Marble Falls, especially in the newer Hill Country-style homes going up near the golf communities. The Wall Connector can pull up to 48 amps, which demands a 60-amp dedicated circuit and often a panel upgrade in older bungalows off Highway 1431. We stock Tesla, Enphase, and FranklinWH equipment locally, so when a Marble Falls customer calls on a Monday, we are usually installing by Thursday, assuming PEC clears the application.
Panel Upgrade for EV Charging
This is the service we end up recommending more than any other for Marble Falls homes. A surprising number of the older downtown houses near Main Street and the lake still run on 100-amp or 125-amp services. That was fine for two window units and an electric water heater. It is not enough for a Level 2 charger, a heat pump, and a modern kitchen. We upgrade panels to 200 amps, coordinate the PEC service disconnect, and make sure the new load calc actually passes inspection the first time.
Garage & Driveway Charger Wiring
Running conduit through a Marble Falls garage or across a driveway is not like doing it in Dallas. The substrate here is granite and limestone. A shallow trench for driveway conduit can turn into a two-day job if you hit rock and you are not prepared. We bring rock saws and the right crew from the start. For alley-load garages, which are common in the older parts of town, we run flexible metal conduit along exterior walls to keep clearances tight and code-compliant without digging anywhere near the property line.
Solar-Paired EV Charging
If you already have panels, or you are thinking about them, pairing an EV charger with your solar system changes the whole math. Because PEC compensates exported solar at an avoided-cost rate far below retail, the real savings in Marble Falls come from using your own power while the sun is up or storing it for overnight charging. That means the charger and the inverter need to talk to each other, and the PEC interconnection application has to list both the solar and the EV load. We file that paperwork as one package, which is faster and cleaner than two separate applications.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Marble Falls
Gus’s Solar works with Tesla, Enphase, FranklinWH, and SolarEdge equipment across Marble Falls and the surrounding Hill Country. That covers wall connectors, smart chargers that talk to your inverter, and battery-backed charging setups. Because we keep parts for these brands in local stock, a warranty or repair call in Marble Falls does not mean a three-week wait while something ships from a national warehouse. If you bring us an estimate from another company that lists a Tesla or Enphase charger, we will give you a free second opinion on the whole thing, equipment and labor both.
Common EV Charger Installation Problems We See in Marble Falls Homes
- Undersized panels on older downtown homes. The limestone-block houses near Main Street were built for 100-amp services. A Level 2 charger on that panel will trip the main breaker, and PEC will deny the load-side approval. We catch this in the quote phase, not after the first charging session.
- PEC line-side versus load-side tap confusion. Some Marble Falls garages have subpanels that are fine for a 15-amp outlet but not for a 48-amp continuous charger. Getting the tap location wrong on the PEC application fails inspection and costs a rework day. We know which houses need which tap without guessing.
- Granite trenching gone wrong. Near Granite Mountain and the hill-view lots, the bedrock sits shallow. A standard trenching crew from Austin will burn a day and abandon a run if they hit it. We send crews with rock saws who expect the granite, because that is what Marble Falls is built on.
- Placement that ignores the afternoon sun. Chargers and inverters installed on a west-facing garage wall in a Marble Falls summer can hit thermal shutdown in August. We place equipment with ventilation clearances in mind, and we look at where the afternoon sun actually lands before we mount anything.
Pricing for EV Charger Installation in Marble Falls, TX
We Also Serve Cities Near Marble Falls
If you are in Lago Vista, Leander, Bee Cave, or Lakeway, our EV Charger Installation team covers those areas too. Most of the jobs we do around the lakes share the same PEC service area, so the same local knowledge applies. For more on what it looks like to work with us here, see EV Charger Installation in Marble Falls and give us a call. We are easy to reach.
Serving Marble Falls, TX - Our Local Coverage Area
We’re based in the Marble Falls area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - EV Charger Installation in Marble Falls
Does Pedernales Electric Cooperative require a separate meter or special approval for a Level 2 EV charger in Marble Falls?
No, PEC does not require a separate meter for a residential Level 2 charger, but they do require an interconnection and load-side approval before the charger goes live. Because PEC is a cooperative and not a municipal utility, the approval timeline can run from a few days to a couple of weeks depending on their queue. We file the application for you and follow up until it clears. If you want us to check where your address sits in the PEC queue, call (877) 550-6892.
Can I install a Tesla Wall Connector on a 100-amp panel in an older Marble Falls bungalow?
Technically no, not at full amperage. A Tesla Wall Connector needs a 60-amp dedicated circuit, and adding a continuous 48-amp draw to a 100-amp panel leaves almost no headroom for the rest of the house. The right fix is a panel upgrade to 200 amps, which we do regularly for homes along Mormon Mill Road and the older streets near downtown Marble Falls. We can quote the upgrade and the charger install together so you see the full number up front.
How do Marble Falls granite and limestone soils affect driveway EV charger conduit installation?
Granite and limestone sit close to the surface across much of Marble Falls, especially on the hill lots and anywhere near Granite Mountain. Trenching for driveway conduit through that rock without the right equipment breaks conduit, stalls the job, and costs more than it should. Our crews bring rock saws on every Marble Falls trenching job from day one, so the conduit goes in once and stays intact.
What is the fastest way to get PEC approval for a solar-paired EV charger in Marble Falls?
File the solar interconnection and the EV load as one combined application instead of two separate ones. PEC reviews the package faster when it sees the full picture: your solar production, your battery storage if you have it, and your charger’s continuous load. We prepare that combined filing for Marble Falls customers all the time. It cuts weeks off the approval and prevents the back-and-forth that happens when the co-op gets half the story.
Why do I need a panel upgrade instead of just adding a breaker for my garage EV charger in Marble Falls?
Because PEC’s load-side review will catch it. A 100-amp or 125-amp panel on an older Marble Falls home cannot safely carry a 48-amp continuous charger load alongside the air conditioners, water heaters, and kitchen circuits that Marble Falls summers demand. PEC requires a load calculation that shows headroom, and if the panel fails that calc, the approval stops right there. We upgrade the panel to 200 amps, re-file the paperwork, and get the charger running without tripping your main breaker every time you plug in.
Call Gus’s Solar for EV Charger Installation in Marble Falls
We are not a door-knock crew and we will not ask you to sign tonight. Bring us your electric bill and your panel photo, and we will bring you a straight quote for your Marble Falls home. One price, no games, and a live person answers when you call. Reach Gus’s Solar at (877) 550-6892 for a free estimate on any EV charger install in Marble Falls.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Marble Falls and the Highland Lakes area.