Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Fast, Reliable Commercial Solar Installation Across Redwood City
Commercial solar installation in Redwood City typically runs $2.25-$2.85 per watt before incentives, meaning a 100 kW rooftop system lands between $225,000 and $285,000, with most warehouse and office projects qualifying for the 30% federal Investment Tax Credit plus accelerated depreciation. We get crews to Redwood City commercial sites within 24-48 hours for assessments and can usually begin installation within 2-4 weeks of permit approval. If you need a straight answer on what your building will actually produce, call Gus Petrakis at (877) 550-6892 and bring a year of utility bills. He’ll quote the year-25 output, not the day-one brochure number.
Why Gus’s Solar Is Redwood City’s Preferred Commercial Solar Installation Company
Gus Petrakis has been installing solar since 2011, and his name, address, and license number are published right on the truck. Around Redwood City, property owners can verify that fast. Go to the city building department at 1017 Middlefield Road and pull a permit record. Most of the installers working Redwood City sites are out-of-state LLCs with a PO box. We’re not. The team that walks your roof in the 94063 flatlands or the 94062 hills is Gus’s own background-checked, uniformed crew, not a subcontractor handed the job by a broker.
Our Redwood City customers call a live person 24/7. Not a voicemail, not a ticketing portal. When a production sensor trips at 2 a.m., someone answers and Gus follows up. That matters on commercial systems where downtime is lost revenue. It also matters when your property manager calls with a question about the HOA in Redwood Shores and needs a straight answer before Friday’s board meeting.
Every job carries the 90-Day Done Right Promise. If it isn’t right, Gus makes it right, in writing. And our no-hassle pricing means the number you sign is the number you pay. If a salesman needs an answer tonight, the answer is no. Take two weeks. The price will be the same.
Our Commercial Solar Installation Services in Redwood City
Commercial Rooftop Solar
Flat commercial roofs across Redwood City’s office parks and light-industrial corridors are good candidates for ballasted or mechanically attached systems. We assess roof age and condition first. A warehouse on Seaport Boulevard with a 15-year-old TPO membrane needs different penetration detailing than a tilt-up on Industrial Road with a newer torch-down roof. Our Commercial Solar Installation team flashes every penetration properly and stands behind it. Redwood City’s building department accepts our engineering packages without back-and-forth, which keeps your permit timeline moving.

Warehouse & Industrial Solar
Warehouses along the 101 corridor between Woodside Road and Whipple Avenue run heavy refrigeration, packaging, and HVAC loads, and those daytime loads align with solar production. A 150 kW system on a 40,000-square-foot warehouse in Redwood City can offset 70-80 percent of annual use when the roof has full southern exposure and no fog penalty. That math is better here than it is in Daly City or Half Moon Bay. We size systems against your interval data, not a sales template.

Solar Carport Installation
Redwood City’s downtown parking lots and office campuses along Veterans Boulevard and Broadway are under increasing pressure to provide shaded parking and EV charging. A solar carport does both while generating bill credits. Steel structures need calcs stamped for the city’s wind exposure category. We handle that in-house. Carport projects typically run $3.50-$4.50 per watt depending on steel costs and whether you add Level 2 charging loops. For a 50 kW carport, expect roughly $175,000-$225,000 before credits.

Commercial Battery Storage
Battery storage is the fastest-growing request from Redwood City commercial accounts. PG&E’s time-of-use rates punish afternoon peak draws, and a FranklinWH or commercial-scale lithium bank lets you shift solar production into the 4-9 p.m. window. For a mid-sized office building, a 100 kWh battery system with inverter and controls typically runs $85,000-$120,000 installed. Redwood City has also seen more grid volatility during heat waves, and battery backup keeps critical loads running when the feeder sags. We design systems with islanding capability for the circuits that can’t go dark.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Redwood City
We install and service equipment from Panasonic, Canadian Solar, JinkoSolar, and FranklinWH, among others. What matters in Redwood City is that we stock local parts for quick turnaround. If a JinkoSolar panel gets cracked by a rogue baseball at a Redwood Shores rec center or a FranklinWH battery throws a fault code, we can usually have the replacement handled within days, not weeks. We won’t push an off-brand panel to hit a price point. We quote equipment we’d put on our own roofs.
Common Commercial Solar Installation Problems We See in Redwood City
- Salt-air corrosion in Redwood Shores (94065). Bayfront exposure means persistent salt-laden air. Standard aluminum racking and non-marine inverter enclosures degrade noticeably within a few years. We specify marine-grade hardware and stainless fasteners as baseline for any project east of Belmont Slough.
- Fog-adjusted production misses in the 94062 hills. Emerald Hills and Farm Hill catch afternoon fog drift from the coastal range. Installers using generic Peninsula production estimates undershoot east- and north-facing hillside roofs by 5-12 percent. We adjust azimuth and tilt against actual historical irradiance data for that specific hillside.
- HOA approval delays in Redwood Shores. The planned community’s architectural review boards and shared-roof rules add lead time. We walk projects through the design review packet early, so interconnection doesn’t slip by three months while the board cycles through monthly meetings.
- Underbuilt racking on commercial flat roofs. Redwood City’s peak winds through the mid-Peninsula can exceed what standard ballast blocks resist. We run uplift calcs against the city’s adopted ASCE 7 wind speeds and add mechanical attachments where the math says ballast alone won’t hold.
Pricing for Commercial Solar Installation in Redwood City, CA
Here are straight numbers for Redwood City. Commercial rooftop systems on existing flat roofs run $2.25-$2.85 per watt depending on roof condition, system size, and whether you need a re-roof first. Solar carports run $3.50-$4.50 per watt. Ground-mount agricultural arrays in the rural acreage south of 84 run $2.75-$3.25 per watt with dirt work and trenching included. Commercial battery storage runs $85,000-$120,000 for a 100 kWh system, scaling from there. These are installed prices with engineering and permits. Bring a bill and we’ll build the math off your actual usage. Call (877) 550-6892 for a free estimate with no signature wanted tonight.
Redwood City’s Climate Advantage: What It Means for Your Commercial System
Redwood City coined the slogan “Climate Best by Government Test,” and it’s not civic fluff. A federal weather study ranked this mid-Peninsula microclimate among the finest in the country, and the thermal belt here logs measurably fewer marine-layer fog days per year than San Mateo to the north or Half Moon Bay over the hill. For commercial solar, that translates directly into more annual production from the same system size. A 100 kW array on a Redwood City warehouse produces roughly 8-12 percent more kilowatt-hours per year than an identical array in Daly City. That’s a government-validated advantage no other Peninsula city can claim, and it shortens your payback period by a full year or more.
Agricultural & Ground-Mount Solar for Redwood City’s Rural Acreage
West of Alameda de las Pulgas and into the 94062 hills, Redwood City still holds larger parcels and detached agricultural workshops that run welders, water pumps, and cold storage. Those operations don’t want a sales crew that shows up once and disappears. They want one trip, heavier-duty racking, and a system wired for rapid shutdown that a county inspector will pass without notes. In the hills above Emerald Hills, our techs reworked a ground-mount array for a detached ag workshop where a previous installer had ignored the afternoon fog intrusion. We replaced the string inverter with Enphase IQ8 microinverters and adjusted azimuth on the east-facing tilt, lifting the production estimate by 11 percent. We handled the heavier racking and rapid shutdown wiring in one trip so the owner’s operation never lost a workday.
We Also Serve Cities Near Redwood City
If your commercial property sits just across the city line, we come out the same way. Our Redwood City crews regularly run projects in San Carlos, Woodside, Menlo Park, and North Fair Oaks. Same live-answer phone, same 90-Day Done Right Promise, same commercial solar service.
Serving Redwood City, CA - Our Local Coverage Area
We’re based in the Redwood City area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Commercial Solar Installation in Redwood City
Yes, it shortens it. Redwood City’s thermal belt logs fewer fog days than neighboring coastal cities, so a commercial system here produces 8-12 percent more annual kilowatt-hours than the same array in San Mateo or Daly City. For a $250,000 system, that’s $30,000-$40,000 in additional production value over 10 years. Call (877) 550-6892 for a year-25 production estimate built on your actual interval data.
Yes. Redwood Shores sits on former bay wetlands with direct bayfront exposure. Salt-laden air corrodes standard aluminum racking and non-marine inverter enclosures within a few years. We specify marine-grade powder coating and stainless fasteners as baseline for any 94065 project. It adds 5-8 percent to racking cost and prevents failure mode you can’t afford to fix later. Get an exact spec by calling (877) 550-6892.
Redwood Shores condos and townhomes are governed by design review boards that meet on fixed monthly schedules. Shared-roof rules mean you may need neighbor sign-off, and the architectural packet has specific requirements for panel placement and conduit routing. We prepare the complete submittal early, which typically removes 4-8 weeks of back-and-forth. Start the process now by calling (877) 550-6892.
We correct for it. Emerald Hills and Farm Hill catch afternoon fog from the coastal range, which hits east- and north-facing array orientations hardest. Generic production estimates run 5-12 percent too high on those exposures. We adjust tilt and azimuth using site-specific irradiance data, and we quote the fog-adjusted number, not the brochure number. Call (877) 550-6892 for a production estimate that reflects your actual hillside.
We use Enphase IQ8 microinverters for detached ground-mount and workshop arrays where partial shading from trees or hillsides is common. Microinverters also simplify rapid shutdown compliance for standalone structures. For larger ag loads with full sun, we’ll spec a string inverter with module-level power electronics when the math supports it. Either way, the system meets current NEC rapid shutdown requirements. Call (877) 550-6892 and we’ll walk your specific workshop layout.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Redwood City since 2011.






Before
After
Before
After
Before
After