Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Commercial Solar Installation Across Murphy
Commercial solar installation in Murphy, TX typically costs $2.10 to $2.85 per watt before incentives, which puts a 50 kW rooftop system between roughly $105,000 and $142,500. Most Murphy commercial projects we quote are designed to offset Oncor demand charges and built around the reality that your building’s largest roof face is frequently not the best solar face. We’re the local crew that has walked Murphy’s HOA review process dozens of times, and we’ll tell you straight what your building’s azimuth, hail exposure, and architectural-review constraints actually mean for production before you spend a dime. Call (877) 550-6892 for a real assessment, not a brochure estimate.
Why Gus’s Solar Is Murphy’s Preferred Commercial Solar Installation Company
Gus Petrakis puts his name on the truck and his license number on every proposal. That matters in Murphy, where your commercial project has to satisfy not just Oncor and Collin County but a homeowners association or property owner’s association that will scrutinize every panel placement, conduit run, and roof penetration. Most national outfits submit a stock design and move on when the HOA pushes back. We sit with the architectural review committee and bring a revised plan that actually gets approved.
Our Murphy commercial customers call the same number and reach a live person, 24/7. No ticket portal, no call center in another state. When a hail storm rolls through Collin County, you’ll want that. Gus’s crew handles the install themselves: background-checked, uniformed, and trained on the specific roof conditions Murphy’s 2000s-era commercial buildings present. The 90-Day Done Right Promise is in writing on every commercial job. If it’s not right, Gus makes it right.
Our Commercial Solar Installation Services in Murphy
We quote real numbers off your actual Oncor bill and your building’s actual roof, not a satellite image from three states away. Here’s what we handle across Murphy:
Commercial Rooftop Solar
Murphy’s commercial rooftops are almost all hip roofs with multiple gables on two-story brick veneer buildings, which means shading pockets and azimuth compromises are the norm, not the exception. We model every plane before we quote, then design to the highest-producing face, not the largest one. A 25 kW system on a Murphy office building typically runs $52,000 to $71,000 installed before the federal Investment Tax Credit.
Warehouse & Industrial Solar
For Murphy’s light-industrial pockets, the physics change. Large flat or low-slope roofs can hold serious wattage, but the real bill killer is demand charges on Oncor’s commercial rate schedules. A 100 kW warehouse array in Murphy runs roughly $210,000 to $285,000, and without storage you may still get hammered on cloudy summer afternoons when demand spikes match low production. We size the array and the battery as one problem, not two line items.
Solar Carport Installation
When the HOA won’t approve a street-visible rooftop array or your roof just doesn’t have a clean south-facing plane, carport solar is often the quiet workaround. A covered parking structure on Murphy commercial property solves two problems at once: it generates power and shields fleet vehicles from the same Collin County hail that trashes roof-mounted panels. Carport solar in Murphy generally runs $2.60 to $3.10 per watt depending on steel structure and footings.
Commercial Battery Storage
This is the piece Murphy businesses skip and then regret. Oncor’s demand charges can be 30-40% of a commercial bill in July and August. A properly sized battery from FranklinWH or Tesla shifts your load off peak and absorbs those spikes. We sell and install commercial storage in Murphy starting around $900 to $1,200 per kWh of capacity, fully integrated with your inverter. If you already have net metering, storage is still how you kill the demand charge line.
Trusted Brands We Service in Murphy
We work with equipment that holds up in North Texas conditions, and we stock replacement parts locally for Murphy commercial customers. REC and Qcells panels are the two we recommend most often for Murph: both are impact-rated for hail and both carry strong year-25 output warranties, which matters when your array sits in one of the most hail-active counties in Texas. We also service and support SunPower and existing Enphase, SolarEdge, and FranklinWH systems. If your current installer’s phone rings out, ours doesn’t.
Common Commercial Solar Installation Problems We See in Murphy Homes
- HOA architectural review rejects the street-visible array. Murphy’s master-planned subdivisions enforce stricter solar placement rules than Texas Property Code §202.010 requires. That forces arrays to rear or east-west roof planes, cutting production 10-15% versus a true south azimuth and shifting your payback period by years. We design to the rules before you pay for engineering.
- Shaded azimuth pockets on multi-gabled hip roofs. Murphy’s 2000s-era commercial buildings have rooflines with lots of intersecting planes. Installers who quote off satellite images miss the shadow pattern from the adjacent gable, and you get a production estimate that’s 8-12% higher than what the system actually delivers at true-up time.
- Oncor demand charges eating the savings. Solar-only systems still leave you exposed when a heat wave hits at 5 p.m. and your panels are already losing angle. Warehouse tenants in Murph consistently underestimate this line item. A battery fixes it; ignoring it doesn’t.
- Builder-grade hail damage to existing panels. Murphy sits squarely in Collin County’s hail corridor. Panels that weren’t spec’d for 1-inch hailstone impact fail early, and the replacement cost eats whatever the original system saved. We only install panels rated to IEC 61215 Class 2 minimum.
Pricing for Commercial Solar Installation in Murphy, TX
Here’s the honest math for Murphy’s market, pulled from jobs we’ve actually quoted and built. Commercial rooftop solar runs $2.10 to $2.85 per watt installed. That means a 25 kW system on a Murphy office building lands between $52,000 and $71,000, a 50 kW system between $105,000 and $142,500, and a 100 kW warehouse array between $210,000 and $285,000. Carport solar starts around $2.60 per watt. Commercial battery storage adds $900 to $1,200 per kWh. The factors that move you within those ranges are your roof’s azimuth (east-west arrays in Murphy produce 10-15% less), hail-rating requirements, and whether your HOA forces rear-facing placement. We quote the year-25 output number, not the day-one brochure figure. Bring us a bill, we’ll bring you the math. Call (877) 550-6892 for a free estimate and take two weeks to think about it. The price will be the same.
We Also Serve Cities Near Murphy
Gus’s Solar handles commercial projects across Collin County and the surrounding area. If your business is in Murphy or nearby, you’re in our service territory. We regularly quote and install in Sachse, Wylie, Lucas, and Plano, and we coordinate scheduling from our Dallas-Fort Worth office so your project doesn’t wait on a sales rep’s calendar.
Serving Murphy, TX - Our Local Coverage Area
We’re based in the Murphy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Commercial Solar Installation in Murphy
Yes, the HOA’s architectural review committee still gets a say in Murphy. Texas Property Code §202.010 protects your right to install solar, but it doesn’t stop HOAs from restricting panels visible from the street or requiring specific placement. In Murphy’s master-planned subdivisions, this routinely forces arrays to rear roofs or east-west planes, which cuts production 10-15% compared to a true south azimuth. We design for HOA approval first, so you don’t pay for engineering that gets rejected. Call (877) 550-6892 if your committee is pushing back.
Because Murphy’s 2000s-era subdivisions were platted with street orientations that often run northeast-southwest, not true north-south, and the hip roofs on those buildings create multi-gabled shade patterns that a satellite image won’t catch. The largest face frequently faces northeast and gets morning sun only. We model every plane’s azimuth and shading before we quote, then tell you which face actually produces. We installed a 48.4 kW rooftop array on a two-story brick-veneer office building in the Murphy Marketplace area after modeling showed its huge northeast-facing hip roof would produce 13% less than the smaller southwest-facing plane. Production hit 98% of modeled output in year one.
You want IEC 61215 Class 2 as the floor, which certifies impact resistance against 1-inch hailstones at 50 mph. Murphy sits in Collin County’s hail corridor, one of the most hail-active counties in Texas, so panels without that rating are a future repair bill. We spec REC and Qcells panels on most Murphy commercial jobs specifically because their year-25 degradation numbers and impact ratings hold up here. Call (877) 550-6892 and we’ll walk you through the spec sheet.
Yes, in most cases, because Oncor’s commercial demand charges are separate from your energy charges and net metering doesn’t reduce them. A warehouse tenant in Murphy’s light-industrial pockets can see 30-40% of the total bill come from demand charges during summer peak windows. A commercial battery sized to shave those peaks pays for itself faster than the panels alone in a lot of our Murphy quotes. We’ll model it off your actual bill.
Because panel degradation compounds and hail accelerates it in North Texas. A panel that starts strong but degrades at 0.8% annually versus 0.45% annually leaves you with a meaningful production difference by year 15, which is when your payback math either holds or doesn’t. We quote the year-25 output estimate off your actual usage, not the brochure’s day-one peak. That’s the number Gus puts his name on.
Yes. We send a crew to Murphy daily and our live-person phone line runs 24/7. Call (877) 550-6892 in the morning and we can often be at your building the same day or next morning to walk the roof and pull your Oncor interval data. Estimates are free and we won’t ask you to sign anything tonight.
If your business is in Murph and you’ve already got a quote from someone else, bring it to us. We’ll give you a free second opinion on any written estimate. No trip charge inside our own county. And if you’re a senior or veteran, ask about the 10% discount that never expires. Call (877) 550-6892 or stop us at the hardware store. We’re around.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Murphy with honest quotes and year-25 numbers since 2011.