Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Solar Panel Repair Across Selma
Solar panel repair in Selma typically runs $180-$640 depending on whether you’re dealing with a failed microinverter, damaged wiring, or an inverter that’s given up entirely. Most jobs are done in a single trip, because our truck carries the parts Selma homes actually need. If your system is underperforming or dead, call (877) 550-6892 and Gus Petrakis or a member of his crew will give you a straight answer before we ever send a truck out.
We know Selma’s rooftops. We know the 1950s ranch homes off Floral Avenue, the newer builds near Selma High, and the acreage properties south of Mountain View Avenue where a single inverter handles a big ground-mount array. When fog season hits and your production drops, you need someone who can tell the difference between a real fault and a seasonal weather pattern without charging you for a diagnosis you didn’t need.
Why Gus’s Solar Is Selma’s Preferred Solar Panel Repair Company
Gus Petrakis founded Gus’s Solar in 2011 and put his own name on the building. That’s not a marketing line; it’s how the company works. When you call about a repair in Selma, the person who answers is the person who owns the company or someone who works directly under him. No call center, no voicemail tree, no ticket that disappears into a queue.
We serve Selma from our Fresno, Central Valley office, but the crews you’ll see on your roof are Gus’s own people, background-checked and uniformed. They show up when they say they will. If a repair isn’t done right, the 90-Day Done Right Promise means Gus comes back and makes it right, in writing, on every job. That promise applies in Selma the same as everywhere else we work.
The response time to Selma is usually same-day or next-day for diagnosis. If your system is fully down and you’re losing production during a 105°F stretch when you need the AC running, we treat that as an emergency and prioritize getting to you.
Our Solar Panel Repair Services in Selma
Inverter Repair & Replacement
Inverter failure is the most common reason a Selma system stops producing, and it’s also the most misdiagnosed problem we see. A string inverter that’s overheating on a July afternoon on a south-facing wall will fault and restart, fault and restart, until the homeowner assumes the whole array is shot. We test the inverter under load, check fault history, and tell you whether a repair or a replacement makes sense. A replacement inverter in Selma typically runs $1,800-$3,200 installed, depending on brand and array size.
Wiring & Connector Repair
Selma’s older ranch homes often have wiring runs that were installed by crews who are no longer in business. We find failed MC4 connectors, aluminum-to-copper transitions that weren’t done right, and junction boxes that have been wet for years. Corrosion and rodent damage are common out here too. Squirrels on acreage properties love chewing through wire insulation in attics and under arrays. A typical wiring repair in Selma runs $150-$400 per fault point.
Roof Leak Repair Around Mounts
On a ranch home off Floral Avenue, our tech found a SolarEdge inverter faulting during a January tule fog stretch. The homeowner thought his panels were dead, but we diagnosed a rapid shutdown wiring fault near the original 100-amp panel and had the system back online same trip. Leaks around roof penetrations are a repair we take seriously, because the damage shows up months after the original install and the installer who did the work may not answer the phone anymore. We remove the mount, repair the flashing or sealant, and re-set it properly. Roof leak repair around mounts in Selma runs $350-$900 per penetration, depending on roof type and access.
Panel Replacement After Damage
Hail in the central Valley is not common, but it happens. More often we see panels cracked from branch falls, golf balls, and the occasional rock thrown by a mower on an acreage property. A single panel replacement in Selma runs $350-$650 including the panel, microinverter or optimizer testing, and labor. If the damage is limited to one or two panels, repair is almost always cheaper than replacing the array. If the panels are 15 years old and obsolete, we’ll tell you that too rather than stringing you along.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Selma
We work on systems built with Panasonic, Canadian Solar, JinkoSolar, FranklinWH, and most other major brands you’ll find on Selma rooftops. If your inverter is a SolarEdge or Enphase, we stock those parts on the truck and can usually complete a swap same-day without waiting on a distributor. If you have an older system from an installer that’s gone under or a brand that’s discontinued, we can still help. We carry compatible replacements and know which orphaned systems are worth repairing versus replacing.
For Selma homeowners, that means less downtime and one trip instead of three. For more on what we handle across the board, see our Solar Panel Repair services overview.
Common Solar Panel Repair Problems We See in Selma Homes
- Fog-season underproduction blamed on the inverter. Selma’s tule fog cuts daily irradiance by 50-70% for weeks in December and January. If your system was sized for summer peaks only, it will underproduce in winter no matter what. We check system design before we start swapping parts.
- Thermal derating on 105°F+ afternoons. Panel surface temps can hit 160°F in July, which reduces output by 15-20% right when your AC is pulling the most. That’s physics, not a fault. We’ll tell you the difference.
- Original 100-amp electrical panels tripping during grid-tied testing. Many Selma ranch homes built between the 1950s and 1980s still have their original service panels. A repair visit can expose a panel that can’t handle the system it was attached to. We’ll show you the numbers and give you honest advice about what’s urgent and what can wait.
- Mount leaks that show up after the first real rain. Poor flashing on the original install, or sealant that has dried and cracked after a decade of Selma sun, lets water migrate under the shingles and into the attic. We fix the mount, not just the symptom.
Pricing for Solar Panel Repair in Selma, CA
You’ll find our pricing attached to real numbers, not vague promises. Here’s what Selma homeowners can expect:
- Diagnostic visit: $75-$125, credited toward the repair if we do the work. No trip charge for Selma addresses inside Fresno County.
- Microinverter replacement: $250-$450 per unit, including labor. Enphase and SolarEdge units are usually in stock.
- Wiring and connector repair: $150-$400 per fault point.
- Roof leak repair around mounts: $350-$900 per penetration, depending on roof type and access.
- Panel replacement after damage: $350-$650 per panel, including testing.
- Inverter replacement: $1,800-$3,200 installed.
We offer $40 off any repair over $200, a free second opinion on any written estimate, and a standing senior and veteran 10% discount that never expires. The price we quote is the price we charge. Call (877) 550-6892 for an exact quote. Estimates are free.
We Also Serve Cities Near Selma
If you’re in Fowler, Parlier, Kingsburg, or Reedley, you’re in our service area too. We schedule jobs throughout Fresno County, so your repair doesn’t get delayed because you live a few miles outside the city line. You can read more about our local coverage on our Solar Panel Repair in Selma page, and if you’re just down the road, we’ll treat your repair with the same urgency we give any Selma address.
Serving Selma, CA - Our Local Coverage Area
We’re based in the Selma area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Repair in Selma
Selma’s tule fog cuts daily solar irradiance by 50-70% for weeks at a stretch from roughly Thanksgiving through February. Before you assume something is broken, check your system’s year-one production estimate and see whether it was sized for annual averages or just peak summer numbers. If the installer sold you on July output, your winter bills will look wrong even when the system is working correctly. We’ll pull your production data and tell you if you’re looking at a real fault or a fog-season pattern. If it’s a real fault, we’ll find it. Call (877) 550-6892 and we’ll walk through the numbers with you.
Yes, we repair systems on older panels all the time. But we’ll also tell you if the panel itself is now the problem, and why it might be tripping during grid-tied testing. Many Selma ranch homes built from the 1950s through the 1980s still run on 100-amp service, and adding solar on top of that without upgrading the panel creates a bottleneck. We’ll give you a straight answer about what’s safe and what’s not. If an upgrade is needed, we’ll quote it and explain exactly why. No pressure, no panic. The decision is yours.
Yes. We regularly take over systems in Selma whose original installers have vanished or stopped answering calls. We’ll inspect the array, the inverter, the wiring, and the roof penetrations, and give you a written repair plan with line-item pricing. If the system is worth repairing, we’ll do the work and stand behind it with the 90-Day Done Right Promise. If it isn’t, we’ll tell you that, too. We’d rather tell you the truth than sell you a repair that won’t last.
Yes, we fix mounts without touching the rest of your roof or the panels. We remove the mount, repair or replace the flashing and sealant, and re-set the penetration so it drains properly. The work runs $350-$900 per penetration in Selma, depending on roof type and access. This is one of the most common repairs we make on 10-to-15-year-old installs in this area, because the original flashing was either done poorly or the sealant has baked out after years of valley heat. Call (877) 550-6892 and we’ll come take a look.
A cracked panel or a punctured backsheet usually means replacement. Hairline cracks that don’t show moisture or arcing may just need monitoring. We’ll inspect each panel visually, check IR output if needed, and tell you the honest condition of each one. A single panel replacement in Selma runs $350-$650 installed. If you have several damaged panels, we’ll price the batch and let you decide whether repair or replacement makes more sense. No one gets a new array sold to them just because a branch fell.
Call Gus’s Solar for Solar Panel Repair in Selma, CA
If your system is underperforming, leaking, or dead, call (877) 550-6892. A live person answers, day or night. We’ll schedule a visit, diagnose what’s actually wrong, and give you a price before we start the work. And if someone has already quoted you a repair and you want a second set of eyes, bring us the quote. Gus will go over it with you line by line.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Selma and Fresno County since 2011.