Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Commercial Solar Installation Across Cleveland
Commercial solar installation in Cleveland, TX typically runs $2.10 to $2.85 per watt before incentives, which puts most warehouse and agricultural systems between $85,000 and $400,000 depending on scale. Our crew coordinates the SHECO interconnection paperwork, Liberty County permits, and wind-load engineering so you do not have to chase three different offices. We have been doing this work long enough to know that Cleveland is not Houston, and your power bill is not either. Call (877) 550-6892 for a straight answer on what your building would actually cost to power with the sun.
Why Gus’s Solar Is Cleveland’s Preferred Commercial Solar Installation Company
Gus Petrakis started this company in 2011 and has kept his name on the truck ever since. When a Cleveland business owner calls about Commercial Solar Installation, they talk to Gus or someone on his own crew, not a rotating cast of project managers in another state. The address is published. The license number is published. If something goes wrong after the array is live, the same person who quoted the job comes back to fix it.
We work regularly along US-59, FM 2025, and throughout the 77327 and 77328 zip codes. Business owners in Cleveland have told us the same story more times than we can count: a national outfit quoted them a glossy number built on CenterPoint net-metering assumptions, then the first true-up from SHECO came back far lower than promised. We do not guess. We pull your actual SHECO bill and model the year-25 output against the co-op’s actual export-credit rules before we ever hand you a number.
Every job carries the 90-Day Done Right Promise in writing. If it is not right, Gus makes it right. And a live person answers the phone 24/7. Not a voicemail. Not a ticketing portal. A person.
Our Commercial Solar Installation Services in Cleveland
Commercial Rooftop Solar
A typical commercial rooftop array in Cleveland runs $2.10 to $2.60 per watt, and the biggest variable is wind-load engineering. Liberty County enforces wind ratings that many installers trained in Houston’s IOU territory simply do not plan for. We engineer every racking system for 150 mph exposure and flash every penetration so the roof stays dry through a tropical storm season. If your building sits in the Piney Woods off FM 2025, we will map tree shading before we ever propose a panel layout.
Warehouse & Industrial Solar
Warehouse arrays in Cleveland typically fall between $110,000 and $400,000 depending on roof square footage and panel count. The older metal buildings around the Liberty County warehouse district often have aging roofs that need reinforcement before panels can be mounted. We inspect for uplift risk, deck thickness, and fastener condition first. Then we design the array. Skipping that step is how you get uplift cracks in the first tropical storm season.
Agricultural & Ground-Mount Solar
Plenty of Cleveland properties have the acreage to skip rooftop work entirely. Ground-mounted arrays for agricultural or commercial use run $2.30 to $2.85 per watt in this area, and they make sense when loblolly pines shade the roof planes. A ground mount lets us place the array where the sun actually lands, not where the building happens to be. For ranches, storage yards, and rural operations throughout 77327 and 77328, this is often the better math.
Commercial Battery Storage
Commercial battery storage in Cleveland runs $45,000 to $180,000 depending on capacity and chemistry. Given that SHECO’s export-credit cap limits what you get for sending excess generation back to the grid, storing that power for your own cooling load often beats selling it back. Cleveland summers are hot and humid, and your HVAC runs hard from May through September. A properly sized battery bank paired with FranklinWH or Enphase hardware can carry that load through peak demand windows and keep the lights on when the grid blinks.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Cleveland
We install and service equipment from Qcells, SunPower, and Panasonic, and we stock local replacement parts for Cleveland customers so a failed microinverter does not mean a two-week wait for a shipment. If you bought a system from someone else and they have gone quiet, call us. We service what we did not install, and we will give you a free second opinion on any written estimate.
Common Commercial Solar Installation Problems We See in Cleveland Homes
Even on commercial buildings, the failure points in this part of Liberty County follow a pattern:
- SHECO export-credit surprises: A system sized using CenterPoint net-metering assumptions hits SHECO’s lower export-credit cap on the first true-up statement, and the owner realizes the production estimate was never built for their actual utility. We model against your real SHECO bill from day one.
- Wind-load failures on old roofs: Mounting panels on an aging 1960s or 1970s roof without a wind-load reinforcement plan leads to uplift cracks during the first tropical storm season. Liberty County inspects for this. We design for it before we ever drill a hole.
- Pine shading on rooftop arrays: Mature loblolly pines off US-59 and FM 2025 can shade entire roof planes for half the day. A properly designed system works around this with microinverters or a ground mount. A poorly designed one just underproduces forever.
- Service-entrance upgrades nobody quoted: SHECO’s interconnection approval requires rapid shutdown at the service entrance. Older buildings in Cleveland often need a panel or service upgrade before the co-op will sign off, and the cheapest bidder does not mention it until the permit gets flagged. We build it into the quote from the start.
Pricing for Commercial Solar Installation in Cleveland, TX
Here is what commercial solar actually costs in Cleveland, based on the jobs we have done in this market:
- Commercial rooftop solar: $2.10-$2.60 per watt. A 100 kW array runs roughly $210,000-$260,000.
- Warehouse & industrial solar: $110,000-$400,000 depending on roof size and panel count.
- Agricultural & ground-mount solar: $2.30-$2.85 per watt. A 50 kW ground mount runs roughly $115,000-$142,500.
- Solar carport installation: $3.00-$3.80 per watt. More steel and concrete, but it shades vehicles and generates power.
- Commercial battery storage: $45,000-$180,000 depending on capacity and chemistry.
- Commercial solar maintenance: $350-$900 per visit depending on array size and access.
What moves your number? Roof condition and age, wind-load reinforcement scope, service-entrance upgrades, and whether SHECO’s queue adds weeks to your timeline. We quote the year-25 output off your actual bill, not a brochure estimate. Estimates are free, and the senior and veteran 10% discount never expires. Call (877) 550-6892 and bring a bill. Gus will bring the math.
We Also Serve Cities Near Cleveland
Our crews work throughout Liberty County and the surrounding area, including Conroe, Atascocita, Spring, and The Woodlands. If your business is in one of those communities, Cleveland is not the only place we show up with the right racking and the right paperwork. Same phone, same crew, same guarantee.
Serving Cleveland, TX - Our Local Coverage Area
We’re based in the Cleveland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Commercial Solar Installation in Cleveland
SHECO’s net metering cap and export-credit formula differ from CenterPoint’s, and the difference shows up on your first true-up statement if your installer modeled with Houston IOU assumptions. The fix is to build your production estimate around your actual SHECO bill and export-credit rate from day one. Call (877) 550-6892 and we will run the real numbers off your last 12 months of usage.
Yes. Liberty County wind-load codes require racking engineered for 150 mph exposure on commercial rooftops, and the inspection process checks mounting points, deck condition, and fastener specs. If your roof is older, plan for reinforcement. If it is a 1960s metal building, plan for real reinforcement. We design for this before we quote.
No. Shading cuts production, but it does not kill solar. Options include microinverters that isolate shaded panels, trimming or selective panel placement, or a ground-mounted array on the part of your lot that actually gets sun. In the Piney Woods off FM 2025, shade is a design problem with known solutions. Call (877) 550-6892 for a shade assessment, no charge.
A properly engineered array with wind-rated racking and proper penetration sealing should ride through the storm intact. A poorly installed one can lose panels, lift its mounts, or let water into the roof. That is why we engineer for 150 mph exposure and inspect every penetration. If you already have an array and want it checked before the next tropical storm season, call us.
Often, yes. SHECO requires rapid shutdown compliance at the service entrance, and many older buildings in Cleveland have panels from the 1960s through 1990s that do not meet that standard. We build the upgrade into your quote so there are no surprises when the co-op reviews your paperwork. Call (877) 550-6892 for a free estimate that includes everything.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Cleveland since 2011.