Free bill analysis - bring a power bill, get the production math for your actual roof, panel brands like Qcells and REC compared side by side
If the pitch starts at your door and ends with "sign tonight for the special," sleep on it. The sun will still be there tomorrow; so will we.
Before
After
Before
After
Before
AfterFast, Reliable Solar Panel Repair Across Burbank
Solar panel repair in Burbank typically runs $180-$850 depending on whether you need a microinverter swap, an inverter replacement, or roof leak work around your mounts. Most repairs on Burbank homes are completed in a single visit, and we answer the phone live at (877) 550-6892 when your system stops producing. Gus Petrakis founded this company in 2011, and his crew has been climbing onto Burbank roofs long enough to know exactly what BWP expects from every repair. If your panels are underperforming on a triple-digit day in the Burbank Hills or your inverter threw a rapid shutdown error after a heat wave, call us before you pay for a repair that will never get credited.
Why Gus’s Solar Is Burbank’s Preferred Solar Panel Repair Company
We’re not a sales crew working a territory. Gus Petrakis puts his name on the truck and his license number on every quote, and the same crew that fixes your system is the one that shows up at the Burbank hardware store. Homeowners in the Ranch District, Magnolia Park, and up in the Burbank Hills call us because we know the difference between a BWP interconnection issue and a dead panel. That matters more than most people realize.
Our response time to Burbank neighborhoods like Toluca Lake-adjacent streets, the Chandler Bike Path corridor, and the flats near Johnny Carson Park is same-day or next-morning for urgent work. We carry common replacement parts for Qcells, REC, and SunPower systems in the truck, so a microinverter swap on a 91505 home doesn’t turn into a two-week parts wait. Burbank customers keep our number because they get a live person at 2 a.m. when a heat wave knocks out their inverter, not a voicemail tree.
The 90-Day Done Right Promise applies to every repair we do in Burbank. If something isn’t right, one call brings Gus back. That’s not a marketing line. It’s written on the invoice.
Our Solar Panel Repair Services in Burbank
Inverter Repair & Replacement
A failed string inverter is the most common repair call we get from Burbank homeowners. On the 1940s and 1950s bungalows near the Warner Bros. lot, we often find original SolarEdge or older SMA inverters that have baked for a decade in San Fernando Valley heat. Replacement costs in Burbank run $1,400-$2,600 including labor, and here’s what most out-of-area companies miss: BWP requires an updated interconnection application whenever an inverter changes. We file that paperwork the same day so your system keeps exporting under Burbank’s current NEM rules.
Microinverter Replacement
Microinverters fail one at a time, which is actually good news for your wallet. In Burbank, a single microinverter replacement runs $350-$550. Systems on low-slope composition roofs in the hills see more heat stress, and we’ve replaced enough Enphase units on 91506 homes to know the failure signature: one panel flatlines while its neighbors produce normally. We stock replacements locally and typically knock this out in one trip.
Wiring & Connector Repair
Squirrels, roof rats, and twenty years of valley sun take a toll on the wiring behind your array. On Burbank ranch homes with exposed conduit runs, we regularly find chewed insulation or corroded MC4 connectors. Wiring and connector repair in Burbank runs $180-$450 for most jobs. A loose connector can arc, and an arc on a 400-volt DC string is not something to ignore. If your monitoring shows intermittent dropouts, call us before it becomes a safety issue.
Panel Replacement After Damage
Hail is rare in Burbank, but falling branches from mature oaks near the Verdugo foothills and even the occasional golf ball from the DeBell course happen. A single panel replacement runs $400-$700 installed. If you have an older REC or SunPower panel that’s been discontinued, we source compatible wattage from our regional suppliers rather than telling you to replace the whole array. That’s the difference between a $600 repair and a $6,000 upsell.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
Our crew works on Qcells, REC, SunPower, and Panasonic equipment daily, plus SolarEdge and Enphase power electronics. Because Burbank sits in its own utility territory with BWP-specific interconnection rules, we keep a local parts inventory for the brands most common on Burbank roofs so a repair doesn’t stall waiting on shipping. If your system was installed by a company that’s since disappeared, we’ll take it over. We service orphaned systems in Burbank regularly and can get you back on BWP’s net metering program.
Common Solar Panel Repair Problems We See in Burbank Homes
- Thermal derating shutdowns on triple-digit days. Burbank regularly hits 105°F+ in July and August. Microinverters and string inverters both lose efficiency and sometimes trip offline when rooftop temperatures push past 150°F. If your system drops out only on the hottest afternoons, that’s thermal behavior, not a dead panel, and it needs a proper diagnosis before you pay for parts.
- 100-amp ranch panel limitations. Many Burbank homes from the 1940s and 1950s still run on original 100-amp electrical panels. When a repair adds a modern inverter or a panel replacement changes the system configuration, the BWP inspection can fail if the service was never upgraded. We flag this before the repair, not after the inspector leaves.
- Mount leaks on low-slope composition roofs. Burbank’s post-war housing stock mostly has low-slope composition shingle roofs. When a mount seal fails, water pools and seeps behind the array. By the time you see a ceiling stain, the wiring behind the panels is already corroding. We reseal mounts and repair the wiring in one visit.
- Rapid shutdown errors after heat waves. After extended triple-digit stretches, inverters on Burbank roofs sometimes latch a rapid shutdown error and refuse to restart. This can be a firmware issue, a ground fault, or a failed component. We diagnose it on-site rather than guessing over the phone.
Pricing for Solar Panel Repair in Burbank, CA
Here are honest numbers for Burbank, not a Colorado brochure.
| Repair Type | Typical Burbank Range | Notes |
|---|---|---|
| Microinverter replacement (single unit) | $350-$550 | Part + labor, one trip |
| String inverter replacement | $1,400-$2,600 | Includes BWP interconnection filing |
| Wiring or connector repair | $180-$450 | Most jobs under $300 |
| Single panel replacement | $400-$700 | Depends on panel wattage and racking |
| Roof leak repair around mounts | $250-$600 | Includes reseal and wiring inspection |
| Full diagnostic (electrical/inverter) | $150-$250 | Waived if we do the repair |
No trip charge inside our own county. Seniors and veterans get 10% off every repair, and we take $40 off any repair over $200. Bring us your BWP bill and we’ll model the repair against your actual production, not a brochure estimate. Call (877) 550-6892 for a free estimate. Take two weeks to think about it. The price will be the same.
We Also Serve Cities Near Burbank
If you’re in Burbank, we’re already close by. Our crews also cover Universal City, North Hollywood, Glendale, and Studio City. If you’re just outside those areas, call and ask. Our Solar Panel Repair team handles systems throughout the eastern San Fernando Valley, and we’ll tell you straight if we can help.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Solar Panel Repair in Burbank
Yes. Any inverter change on a Burbank property, even a warranty replacement, must be reflected in an updated interconnection application filed with BWP. We file that paperwork the same day we complete the repair so you don’t lose export credit. Missing that step can pause your net metering credits until BWP reviews the new configuration. Call (877) 550-6892 and we’ll handle the filing for you.
That’s thermal derating. Every panel loses efficiency as temperature climbs, and on 105°F+ days in the eastern San Fernando Valley, rooftop temperatures exceed 150°F, cutting output 10-18%. If your system drops out entirely on hot afternoons, the cause may be an inverter thermal trip rather than the panels themselves. Burbank’s specific summer heat profile makes this diagnosis common, and it’s one we can confirm with a site visit and monitoring review. Call for an exact diagnosis.
Yes to both. We regularly take over systems in Burbank that were installed by out-of-state companies that no longer answer the phone. Once we repair the system and update the interconnection application with BWP, your net metering credits resume under the current program rules. If the original installer vanished before finalizing the BWP paperwork, we can often reconstruct it from your system’s one-line diagram and production data. Call us and bring whatever documentation you have.
You can absolutely repair a single microinverter without touching your electrical panel. A one-for-one microinverter swap doesn’t change system capacity or configuration, so BWP doesn’t require anything beyond the standard repair. The service upgrade conversation only comes up if you’re adding panels, replacing the whole inverter with a larger one, or adding battery storage. We’ll tell you before any repair whether your 100-amp panel is a constraint. Call (877) 550-6892 with your address and we’ll check the BWP records.
Most of the time it’s a repair. Rapid shutdown errors after extended triple-digit heat in Burbank are usually caused by a failing component: a ground fault in rooftop wiring, a microinverter that overheated and latched, or an inverter power supply that won’t restart. Design issues are rarer and typically show up from day one, not years later. We diagnose rapid shutdown faults on-site and most repairs are completed same-day. The diagnostic fee is waived if we do the repair.
One Thing You Should Know Before Any Solar Repair in Burbank
Burbank is served by Burbank Water and Power, a municipal utility entirely separate from Southern California Edison. Every solar installation here requires BWP-specific interconnection applications, net metering agreements, and rate structure analysis that differ fundamentally from the SCE process used in neighboring Glendale or North Hollywood. BWP maintains its own NEM enrollment cap and export compensation rules.
Here’s what that means for a repair: any change to system configuration, like adding microinverters or swapping inverters, must be reviewed against BWP’s current NEM capacity and export rules. BWP has historically kept a finite enrollment cap on its net metering program, so a repair done without checking available capacity can leave you with a working system that never gets credited for export. Two miles away in Glendale, an SCE-territory installer doesn’t face that step. We check BWP’s NEM capacity before we touch your system, because paying for a repair that won’t be credited is worse than not paying for it at all.
A Burbank Repair We Did Recently
On a 1950s ranch in the Burbank Hills, our crew replaced a failed SolarEdge inverter and six cracked panels on a low-slope composition roof. Because BWP requires re-approval of the interconnection application after any major repair, we filed the updated one-line diagram and production estimate the same day, then verified rapid shutdown function before leaving. One trip, no callback.
Call Gus’s Solar for Burbank Solar Panel Repair
If your solar system is down or underperforming in Burbank, call (877) 550-6892. A live person answers 24/7 and we’ll schedule a visit to your 91505, 91506, 91507, or 91508 home without any pressure. The diagnostic fee is waived if we do the repair, and our 90-Day Done Right Promise applies to every job. Gus Petrakis founded this company in 2011 and his name is on the work.
Written by Gus Petrakis, Owner at Gus’s Solar, serving Burbank since 2011.